LM Signal mod
-
Welcome back!

What's new in the flashlight world? :)
-
What's new in the flashlight world? :)
I dunno! I've been pretty lousy on all the forums recently. 3 kids and a new house will do that to you :)
I gotta say, after taking off all the yellow bits and adding the scissors, the Signal is starting to show it's hidden abilities...
-
This dude stacked the blade and saw on top of each other. Not sure why they couldn't share the top pivot. What tool's spot is the saw taking on that bottom pivot...the awl? Any of you Signal modders have thoughts on this one?
-
Cool Mod !
-
G'Day,
A question to the Signal Modders:
Will a Wave scissors fit inside the tool in place of the Awl? It is difficult to judge from the stock pictures and I don't have one...yet
Cheers,
Pete
-
A question to the Signal Modders:
Will a Wave scissors fit inside the tool in place of the Awl? It is difficult to judge from the stock pictures and I don't have one...yet
Cheers,
Pete
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.


Sent from my SM-G920R4 using Tapatalk
-
Been away for a while, just popped in to see whats new.
Monrogue, how is it that the plastic piece on your file is red when al I've seen are yellow ones?
Haven't gotten back to any more mods on mine yet.
-
Does anyone know if the small tools from any other Leathermsn models can be swapped right in to the Signal with minimal effort?
-
@Tooltime said:
Been away for a while, just popped in to see whats new.Monrogue, how is it that the plastic piece on your file is red when al I've seen are yellow ones?
Haven't gotten back to any more mods on mine yet.
Hey welcome back[emoji2]
I dyed them using liquid rit dye.Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.Thanks Mate,
The pictures do help.
Is there are physical reason that stops the inner tools from being swapped around? I think the scissors is longer than the screwdriver or awl, it is on the Charge. Maybe put the scissors where the bit driver is and move the bit driver towards the screwdriver and remove the awl? It is difficult to imagine without holding the tool. ;)
Cheers,
Pete
-
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.
Thanks Mate,
The pictures do help.
Is there are physical reason that stops the inner tools from being swapped around? I think the scissors is longer than the screwdriver or awl, it is on the Charge. Maybe put the scissors where the bit driver is and move the bit driver towards the screwdriver and remove the awl? It is difficult to imagine without holding the tool. ;)
Cheers,
Pete
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.

Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.I think you are right, it MAY be possible. Judging from where the scissors are on the Charge, one will have to move the bit holder over. The scissors thumb tab is off to the right if looked at the same angle as you opened the Signal so it cannot go where the awl is.
Thank you again for the pictures. I am going to see if I can have a quick look at it when I take a Leatherman in for a warranty repair next week.
Cheers,
Pete
-
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.I think you are right, it MAY be possible. Judging from where the scissors are on the Charge, one will have to move the bit holder over. The scissors thumb tab is off to the right if looked at the same angle as you opened the Signal so it cannot go where the awl is.
Thank you again for the pictures. I am going to see if I can have a quick look at it when I take a Leatherman in for a warranty repair next week.
Cheers,
Pete
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.G'Day Monrogue,
I had a look at the Signal today. I do like it, I must admit. I think the size is perfect for my needs and carry weight. I also had a good look inside, but I think without taking the tool apart I can merely speculate whether a scissors will fit. I think it might, big might. All depends on the clearance with the scissors thumb tab and the pin inside the handle. I am going to get one at some stage and then will try the mod.
Cheers,
Pete
-
@tommywp said:
This dude stacked the blade and saw on top of each other. Not sure why they couldn't share the top pivot. What tool's spot is the saw taking on that bottom pivot...the awl? Any of you Signal modders have thoughts on this one?Looks like he replaced the washer and keep the awl. I wonder how effective the lockup is? Adding scissors is good IMO.
-
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.G'Day Monrogue,
I had a look at the Signal today. I do like it, I must admit. I think the size is perfect for my needs and carry weight. I also had a good look inside, but I think without taking the tool apart I can merely speculate whether a scissors will fit. I think it might, big might. All depends on the clearance with the scissors thumb tab and the pin inside the handle. I am going to get one at some stage and then will try the mod.
Cheers,
Pete
I'm not near my parts bin to double check but I'm thinking the scissors would fit.
However the large bit driver might need work if it is to slide over as it will probably not clear the locking tab's pivot.
You might also have to work on the opener to clear the stopping tab for the awl.
-
@zoidberg said:
Looks like he replaced the washer and keep the awl. I wonder how effective the lockup is? Adding scissors is good IMO.I would be happy if an internal scissors can be fitted.
The scissors will not fit where the awl is, there is not enough room for the thumb stud on it. The awl has its own "compartment". If one has a look at the pic that was posted earlier, and from looking at the tool today, the scissors may only fit where the bit holder is. I don't know if there is a small scissors that has the thumb stud on the opposite side to the one in the Charge. If there is, then it can possibly go where the opener is. I also have not looked at thickness of tools either yet. Once I have the scissors (inbound) I'll compare it to some other internal tools. I "assume" at the moment that all bit holders are same width / thickness.
All this is speculation off course ;)
Cheers
Pete
-
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.G'Day Monrogue,
I had a look at the Signal today. I do like it, I must admit. I think the size is perfect for my needs and carry weight. I also had a good look inside, but I think without taking the tool apart I can merely speculate whether a scissors will fit. I think it might, big might. All depends on the clearance with the scissors thumb tab and the pin inside the handle. I am going to get one at some stage and then will try the mod.
Cheers,
Pete
Yeah it's a little tough to say for sure. Glad you like it though. I look forward to seeing what you do with one [emoji106]
Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
