jlwatso1's 31 Day SOG Super Power Badge Quest
-
DAY 27
Just change socks for the wet bulb readings on the room this morning. Just a bunch of screen watching on another VRF. Wall mout units this time 6 in each of the two rooms. Got the 100% (80/67-95), 75%(80/67-81.5), 50% 80/67-68), and 25% (80/67-65) cooling tests completed and set the room for high temp heating (70/<60- 47/43) before ending my shift. Hopefully night shift will be able to get it out along with SCHE [Simultaneous Cooling and Heating (Outdoor room set to Heating conditions 47/43), one indoor room set to Cooling 80/67 and the other indoor room set to heating conditions 70/<60.] , and then low temp heating 17/15 outdoor. I'm sure that was TMI but thought I would go into a little more detail if anyone was interested. Here's anther beauty shot.

-
DAY 28
Got to work and the tests were complete. Wasn't feeling too good, but chose to stick it out the rest of the day. Used my Powerlock Pliers to grip and remove a screw that had the Philips head stripped out after breaking off the long threads sticking through the plywood wall.(Sorry no pics of that.) Managed to pinch a blood blister on my hand on the next one I tried and had to resort to the sawzaw. Then used them to smash the ends of some copper lines before putting some tape on them to keep trash out. Lastly, I used the knife to cot some Armaflex while insulating copper for the next setup.



-
Gnarly
-
DAY 29
Worked on a VRF setup we started on yesterday. Used my Powerlock to woller out copper after using the tubing cutters. Thought I would share a few pictures.




-
What are you working on?
Sent from my iPhone using Tapatalk
-
It is a VRF (Variable Refrigerant Flow) Heatpump system we are setting up in a Psycrometric Chamber. We test other HVAC systems as well. This one is a 24 ton with 3 Outdoor units and 12 indoor units (6 in each indoor room).
-
DAY 30
Powerlock just got some pocket time today. Here's a beauty shot.

-
Sorry mate but it does have to be from Mr Pinchy. :kirky:
-
DAY 31
Woo-hoo! I get to carry my Surge tomorrow! It has been a challenge, but one that I have enjoyed. Used Powerlock to free Baby's high chair from a balloon while my little girl was napping.

-
Let the modding begin! Wanted to show of the Powerlock's new skin! I may have to start over due to only having one side from a former mod. But you get the idea. I also removed some metal where the knife would have locked. If I keep the area original, no blade modification is necessary. I would like to hear what everyone thinks good or bad. I am also planning on putting my P-540 head in the Powerlock frame as I'm not totally happy with the tool lock I fabricated. I'm not 100% sure if I can bring myself to sacrifice another Surge. I posted that I needed just some handles in one of the trade forums and I'm bidding on eBay to get a donor.



-
I plan to call it a Power Surge PT-540! :D
-
That actually looks a fair amount better than I thought it would. Looking foward to seeing how it goes!
-
It looks good!

-
That's amazing. Sometimes it's not enough and you want the best of both worlds.
https://www.youtube.com/watch?v=FDStPKHUbqw -
Thanks guys! I really just wanted the PT-540 head in a Surge frame, but I think this will work out well. I guess I just have to decide whether to reprofile a Surge blade and scissors and keep it with a skin on only one side or bite the bullet and kill another Surge. I know I would EDC it, but I don't know if I can bring myself to to do it.
On the up side, I would have the 4 outside tools, better file, better scissors, wire strippers & crimpers (PT-540), compound leverage, larger internal space for more tools. Another option I have considered would be to remove the top portion of the PT-540 and attach it to the top of a ST-300 and the make a Surge skin for the ST 300. I assume This would add the extra length to the frame where I could avoid having to reprofile the PT-540 head I would get my outside opening tools and I could use Leatherman internal tools. By doing this, I would also get my 3D Phillips. But we all know what assuming does. I may just have to put things on hold until I can purchase a ST 300 and compare it to the Surge and PT-540. Thoughts and comments welcomed and appreciated. 
-
The Supertool300 isnt any taller than a Surge, and is actually a bit wider. Just so you know.

-
@sLaughterMed said:
The Supertool300 isnt any taller than a Surge, and is actually a bit wider. Just so you know.
I was thinking it was wider. Thanks for the info! Would a Mut long screwdriver fit inside if a bit driver were installed in a Supertool 300 with the blades, file, and saw removed?
-
No idea, I dont actually have one. I suspect it would fit if the bit driver was on one of the far sides of the tool, but I have nothing to back that theory up.
-
@sLaughterMed said:
No idea, I dont actually have one. I suspect it would fit if the bit driver was on one of the far sides of the tool, but I have nothing to back that theory up.That's ok, I appreciate your thoughts!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login