Leatherman Ratchet
-
Ok! Thanks for the info!
-
There are some good small ratchets.

LM bits fit but have to say not very handy.
Issue is to find a case for belt carry. Vic has a good sheet for plus set that does include tool and bit set (and cork screw). From LM I have found just case for tool plus one slide from bit kit set (maybe can fit two but getting too tight). Again if you carry vic ratchet set and LM bit kits, you start to have quite plenty stuff. If LM would provide perfect case for juice and bit adapter plus some bits, I think I would use LM solution more often. Currently don't have LM bits in edc mainly because lack of good case. With tool having LM adapter LM solution is ok.
-
I often use mine with a craftsman 42161 1/4in ratcheting box wrench, though the bits do pass trough with out the extender
-
I usually use this reversible ratchet by Iron Ton- from Northern Tool. I like it because you can use either the Leatherman bit kit or SOG's and whatever else you want. It has pretty good retention. The Leatherman bit extender isn't held in, but it's not a big issue. It was just a little too wide to fit the inside of my SURGE.


-
Couple more pics.



-
I paired a Topeak ratchet with my ST300. Absolutely love it!
Bob
-
I've thought about getting one of those before, it has been sitting in my wish list on Amazon for a few months now... But the Vic ratchet is tempting to... :ahhh
-
[quote author=jlwatso1
I usually use this reversible ratchet by Iron Ton- from Northern Tool. I like it because you can use either the Leatherman bit kit or SOG's and whatever else you want. It has pretty good retention. The Leatherman bit extender isn't held in, but it's not a big issue. It was just a little too wide to fit the inside of my SURGE.
[/quote]The same ratchet as yours with another brand printed on it (popular brand in Chile, mid quality low price, I guess it's builded somewhere else) it came in another set of tools so I took it for my Surge belt sheath and carry it on the side elastic pocket.
I have really pushed hard onto this little ratchet and has never let me down.I am looking forward to see if LM brings up its own ratchet to market. This year it could have been a good one to do it. We all were expecting new products to appear.

Sent from my iPhone using Tapatalk
-
I usually use this reversible ratchet by Iron Ton- from Northern Tool. I like it because you can use either the Leatherman bit kit or SOG's and whatever else you want. It has pretty good retention. The Leatherman bit extender isn't held in, but it's not a big issue. It was just a little too wide to fit the inside of my SURGE.
The same ratchet as yours with another brand printed on it (popular brand in Chile, mid quality low price, I guess it's builded somewhere else) it came in another set of tools so I took it for my Surge belt sheath and carry it on the side elastic pocket.
I have really pushed hard onto this little ratchet and has never let me down.I am looking forward to see if LM brings up its own ratchet to market. This year it could have been a good one to do it. We all were expecting new products to appear.
[IMG said:
http://uploads.tapatalk-cdn.com/20160201/3233a4abeb736acf95ee6cd2a1ca4fec.jpg[/img]Sent from my iPhone using Tapatalk
Be careful not to lose it! I use to carry it in the elastic of a nylon LM pouch and it kept sliding out. I eventually lost one and had to buy another one. :ahhh
-
Sorry you lost yours. I must find a better way to EDC it. Thanks for the advice
Sent from my iPhone using Tapatalk
-
@SurivStud said:
Sorry you lost yours. I must find a better way to EDC it. Thanks for the adviceSent from my iPhone using Tapatalk
Maybe you could stitch up the bottom or around the sides where the head would not slide through.
-
Sorry you lost yours. I must find a better way to EDC it. Thanks for the advice
Sent from my iPhone using Tapatalk
Maybe you could stitch up the bottom or around the sides where the head would not slide through.
It doesn't seem to trend to slide since the ratchet head is wider than the body and the ratchet still sits on the sheath leather bottom. But, the elastic could loosen its tension and cause me troubles. There is no space within the sheath. I need to figure out something.
Sent from my iPhone using Tapatalk
-
Sorry you lost yours. I must find a better way to EDC it. Thanks for the advice
Sent from my iPhone using Tapatalk
Maybe you could stitch up the bottom or around the sides where the head would not slide through.
It doesn't seem to trend to slide since the ratchet head is wider than the body and the ratchet still sits on the sheath leather bottom. But, the elastic could loosen its tension and cause me troubles. There is no space within the sheath. I need to figure out something.
Sent from my iPhone using Tapatalk
Yah, it's fine until the elastic loosens.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login