What Did You Use Your Multitool For Today?
-
cut snow
-
Me and the Sis-in-law made a start on decorating my Neice's bedroom today. Spirit X was the tool on duty.
Pencils were sharpened for sketching in the Bambi scene on the largest wall, a milk bottle was cut up for a mixing pot, and pots/tins of paint were opened for signwriting my Niece's name on the opposite wall. We didn't get either completed, as we were both taking in in turns to look after the wee one at the same time. We did make reasonable progress though, and I should be able to get some block colour on the mural next time I go up.
-
Used my Spirit and Huntsman to adjust the main entrance door closer at work;
Nice. Far too many folks don't do that; they just let them slam until structural work is needed.

Cheers!
The poor resident who lives the other side of the door gets woken at all hours by people coming in and out who leave the door to slam. I'm going to fit a more substantial closer to it for her sanity. -
[quote author=zoidberg link=topic=12238.msg1206536#msg1206536 date=1451888309]

how are you liking that signal?
I'm wondering that as well.
Sent from my SM-G920R4 using Tapatalk
Short version: I like it.

Sweet! Now get onto the long version

When you can of course ;)Sent from my SM-G920R4 using Tapatalk
[/quote]I have so much to do atm moment I'm freakin out.

-
[quote author=mrynnr link=topic=12238.msg1214964#msg1214964 date=1453445190]
[quote author=zoidberg link=topic=12238.msg1206536#msg1206536 date=1451888309]

how are you liking that signal?
I'm wondering that as well.
Sent from my SM-G920R4 using Tapatalk
Short version: I like it.

Sweet! Now get onto the long version

When you can of course ;)Sent from my SM-G920R4 using Tapatalk
[/quote]I have so much to do atm moment I'm freakin out.

[/quote]
Well I hope you can keep it all sorted man [emoji106]Sent from my SM-G920R4 using Tapatalk
-
@Obi1shinobee said:
GOT METAL SAW

How long did that take? 0.0
-
Yesterday i used the philips screwdriver on my swisstool to disassemble my car key to see why the doors wouldn't lock. It appears that the small micro switch is broken.
Today i used my swisstool to hold a metal tab in place while TIG welding it. I accidently forgot about the swisstool and heated the pliers to a couple hundred degrees. It was was too warm to touch because i burnt my finge
I can't find any purple discolouring so i guess that the heat treatment isn't ruined. But i don't think it got better neither 
-
@anditsgone said:
Yesterday i used the philips screwdriver on my swisstool to disassemble my car key to see why the doors wouldn't lock. It appears that the small micro switch is broken.Today i used my swisstool to hold a metal tab in place while TIG welding it. I accidently forgot about the swisstool and heated the pliers to a couple hundred degrees. It was was too warm to touch because i burnt my finge
I can't find any purple discolouring so i guess that the heat treatment isn't ruined. But i don't think it got better neither 
You just gave it some character ;)
Sent from my Z987 using Tapatalk
-
-
I used my P51 to open a co workers can of Rotel yesterday..
-
Used spirit to remove some staples. Planning some reuse for old ironing board.

-
Used my Swisstool x to fix my opel corsa windscreen wiper s because they would not park in the right position. This was caused by a copper pin that did not touch the metal disc anymore that lets the motor know when it is in the right position.
I bent the pin a little bit with my Swisstool pliers and it worked great again.I also resharpend my 70 cent flea market axe with my Swisstool file.


-
I used the Signal to cut and fit a couple replacement windscreen wiper blades so the vehicle would pass inspection.
-
accidently TIG welded on my swisstool's pliers, heat treatment is probably ruined in the tip of the plier. :-
And yesterday i had to cut sandpaper with my Swisstool's scissors. But i have sharpened them back to razor sharp again.
Also have welding spots all over the handles and a large burning spot on the blade.Is there a: don't buy a used multitool from this guy badge? :D

-
fixed a freakin' table with the Spirit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
