Mora Companion
-
@Grathr said:
The patinas look good!
Congrats on the new knives!
And what a way to break in the new one :Dthank you :)
have to wonder if coke does that to a knife blade what does excessive consumption do to a persons body ? and thats not even starting on the sugar content ! Thankfully, my kids have no interest in drinking the stuff, they rarely drink those kind of drinks.
-
The patinas look good!
Congrats on the new knives!
And what a way to break in the new one :Dthank you :)
have to wonder if coke does that to a knife blade what does excessive consumption do to a persons body ? and thats not even starting on the sugar content ! Thankfully, my kids have no interest in drinking the stuff, they rarely drink those kind of drinks.
Coke is scary stuff. I used to work with someone who drank a 4 litre bottle of it every day and she was all over the place. I bet she wouldn't have dropped her Mora down a drain though.............
-
The patinas look good!
Congrats on the new knives!
And what a way to break in the new one :Dthank you :)
have to wonder if coke does that to a knife blade what does excessive consumption do to a persons body ? and thats not even starting on the sugar content ! Thankfully, my kids have no interest in drinking the stuff, they rarely drink those kind of drinks.
Coke is scary stuff. I used to work with someone who drank a 4 litre bottle of it every day and she was all over the place. I bet she wouldn't have dropped her Mora down a drain though.............
into a drain, into it - not down it. besides it's more like a mini stream since i cleared it out. And it wouldn't have happened if you lot didn't want pictures of my precious . . . . . . . . can :kirky: for this one or is that overdoing it ?
and yeah, any of those soft drinks are unhealthy - one of the worst hangovers i had was one new years day - i'd stopped drinking a few months previously and so in the bar new years eve i had 3 or 4 cans of soft drink, following day my head was worse then if i'd had 4 or 5 pints.
-
ok guys, so heres a question - using my new mora companion to slice a few spuds and it struggled - tried the daughters new knife and same story. Got the opinel #8 and it cut like a breeze.
Me or the knives ? They'll cut but only if i put weight on them.
How would you suggest i sharpen them ? Tools i have are a lansky blade medic and a cheapie whetstone, 1500/400 grit.
I would've thought these would be a lot sharper

-
@eamo said:
ok guys, so heres a question - using my new mora companion to slice a few spuds and it struggled - tried the daughters new knife and same story. Got the opinel #8 and it cut like a breeze.Me or the knives ? They'll cut but only if i put weight on them.
How would you suggest i sharpen them ? Tools i have are a lansky blade medic and a cheapie whetstone, 1500/400 grit.
I would've thought these would be a lot sharper

Wrong knife for the job ;) it's the wedge shaped cross section. Great for wood carving, not ideal for veggies :D nothing to do with the sharpness

-
@50ft-trad said:
ok guys, so heres a question - using my new mora companion to slice a few spuds and it struggled - tried the daughters new knife and same story. Got the opinel #8 and it cut like a breeze.
Me or the knives ? They'll cut but only if i put weight on them.
How would you suggest i sharpen them ? Tools i have are a lansky blade medic and a cheapie whetstone, 1500/400 grit.
I would've thought these would be a lot sharper

Wrong knife for the job ;) it's the wedge shaped cross section. Great for wood carving, not ideal for veggies :D nothing to do with the sharpness

thank you Al. Another lesson learned.

-
I love my Carbon Mora. One of the sharpest tools I own.
-
Have to cola one of my 510's Some of you may recall I dealt with this last year but it was a stop gap measure...a little Flitz and forget it.
Well, not surprisingly, the rust is back just like last time. Checked all the others and they're fine.
-
@SAK Guy said:
Have to cola one of my 510's Some of you may recall I dealt with this last year but it was a stop gap measure...a little Flitz and forget it.Well, not surprisingly, the rust is back just like last time. Checked all the others and they're fine.
strange - why just that knife and not the others as well ?
-
My guess is some inconsistency in materials or manufacturing process. I've often seen sets of glassware or cutlery where some pieces catch water salts on the first wash and remain blemished.
-
When I first found the rust it was still in the sheath, blade covered with factory oil. It started at the handle seam. I'm going to do a thread on all this including the cola soak results....it should have been ready this morning but the bottle leaked and the coke level dropped an inch overnight and left the spot worse than ever. Re-doing it now,

-
Have to cola one of my 510's Some of you may recall I dealt with this last year but it was a stop gap measure...a little Flitz and forget it.
Well, not surprisingly, the rust is back just like last time. Checked all the others and they're fine.
strange - why just that knife and not the others as well ?
It's very non typical for a Mora. Perhaps something got under the oil at the factory. I call this "spider rust" and have only seen it one other time on my knives...on my carbon Grohmann Canadian belt knife. It had a tiny spot on it when I bought it. In general, all my carbon knives, even the ones stored in leather sheaths, do not rust.
-
ok, so, I was going to start a new thread but I like this one so shall we keep it going ?
Seems my experience with my companion cutting spuds isn't unique (not that i though it was)
http://forum.multitool.org/index.php?action=post;quote=1225471;topic=64581.0;last_msg=1225471Is there a thread explaining different blade geometries ?
there is this link - http://www.knifeart.com/bladgeomfaqb.html
but I don't know how to relate that to actual blades - ie, what kind of blade is my opinel ? or the companion ?Secondly, and i know this has been asked numerous times, what do people use to sharpen their mora's ?
My sharpening skills are sucky at best, and before i ruin a nice blade I'd like to have a bit more knowledge :) My preference would be freehand using a whetstone
Regarding tools I have a lansky blade medic and a cheapie 400/1500 flat stone. I can invest more but right now I don't really want to, and if i do then cheap is the word . . . . i think knowledge is more important tbh.
-
I use a spyderco double pocket stone for touching up the edge.
-
@Grathr said:
I use a spyderco double pocket stone for touching up the edge.Something like this ?
http://www.spyderco.com/catalog/details.php?product=87 -
I use the Lansky turnbox for my knives . It works really well and is inexpensive to boot. Super easy to use for even the inexperienced.
http://www.amazon.com/Lansky-4-rod-Crock-Sharpener-LCD5D/dp/B000B8FW0E
-
whats the difference between a cheapie £5-6 400/1500 grit stone like i have and a more expensive stone like the spyderco ?
so many questions, so few answers . . . .
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
