Mora Companion
-
Have to cola one of my 510's Some of you may recall I dealt with this last year but it was a stop gap measure...a little Flitz and forget it.
Well, not surprisingly, the rust is back just like last time. Checked all the others and they're fine.
strange - why just that knife and not the others as well ?
It's very non typical for a Mora. Perhaps something got under the oil at the factory. I call this "spider rust" and have only seen it one other time on my knives...on my carbon Grohmann Canadian belt knife. It had a tiny spot on it when I bought it. In general, all my carbon knives, even the ones stored in leather sheaths, do not rust.
-
ok, so, I was going to start a new thread but I like this one so shall we keep it going ?
Seems my experience with my companion cutting spuds isn't unique (not that i though it was)
http://forum.multitool.org/index.php?action=post;quote=1225471;topic=64581.0;last_msg=1225471Is there a thread explaining different blade geometries ?
there is this link - http://www.knifeart.com/bladgeomfaqb.html
but I don't know how to relate that to actual blades - ie, what kind of blade is my opinel ? or the companion ?Secondly, and i know this has been asked numerous times, what do people use to sharpen their mora's ?
My sharpening skills are sucky at best, and before i ruin a nice blade I'd like to have a bit more knowledge :) My preference would be freehand using a whetstone
Regarding tools I have a lansky blade medic and a cheapie 400/1500 flat stone. I can invest more but right now I don't really want to, and if i do then cheap is the word . . . . i think knowledge is more important tbh.
-
I use a spyderco double pocket stone for touching up the edge.
-
@Grathr said:
I use a spyderco double pocket stone for touching up the edge.Something like this ?
http://www.spyderco.com/catalog/details.php?product=87 -
I use the Lansky turnbox for my knives . It works really well and is inexpensive to boot. Super easy to use for even the inexperienced.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
whats the difference between a cheapie £5-6 400/1500 grit stone like i have and a more expensive stone like the spyderco ?
so many questions, so few answers . . . .
-
@SteveC said:
I use the Lansky turnbox for my knives . It works really well and is inexpensive to boot. Super easy to use for even the inexperienced.- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
thanks Steve - that looks easy for even me to use . . . . interesting
this is all becoming very expensive
-
ok, am i correct that the degress refer to the angle at which the blade is ground ? So using the lansky or similiar system, how do you know what angle to use for a particular blade ?
I suppose, in a similiar vein, using a flat whetstone how do you know how much to angle the blade by ? ??? ???

i'm inclined right now to get a real cheapie throwaway and use that to practice with what i have and see . . . . but i could change my mind based on the next post

-
@eamo said:
whats the difference between a cheapie £5-6 400/1500 grit stone like i have and a more expensive stone like the spyderco ?so many questions, so few answers . . . .
when it comes to water stones, the difference is in how fast they release the abrasive within them. with diamond stones it is their longevity and abrasive particle size is more even. ceramic stones are a bit harder to call in respect to grit but at this moment i'd say it more about the certainty in which category a particular stone falls than anything else (i.e. medium, fine, extra fine...)
if you look at the attached grit chart (it's very old, found it on some forum a few years back), our descriptions of fine and even using grit numbers don't necessarily reflect how it would compare to another stone of the same grit number.
look up Murray Carter and Cliff Stamp on youtube if you really want to go nuts with freehand sharpening. they use anything from bricks to high end stones. just be careful because their terminology is different.
when it comes to stones, you might want to see if Belgian Coticule stones can be found at some local shops since those are amazing. blue is around 4000 grit and yellow is around 8000 which is straight razor territory@eamo said:
ok, am i correct that the degress refer to the angle at which the blade is ground ? So using the lansky or similiar system, how do you know what angle to use for a particular blade ?I suppose, in a similiar vein, using a flat whetstone how do you know how much to angle the blade by ? ??? ???

i'm inclined right now to get a real cheapie throwaway and use that to practice with what i have and see . . . . but i could change my mind based on the next post

general idea is that 20 degrees per side is optimal for most cutting tasks and most users. the steeper the angle the better a knife will cut (generally) but the edge will also be less stable (since it has less metal to support it). there are extreme examples of putting 8 degrees per side and edges still cutting soda cans without major issues.
this is the reason why Mora knives cut so well out of the factory - their angle is 12 per side as far as i remember. nothing magical about the grind except that it can support such an angle
going freehand does have a lot to do with feeling the right angle but you can always color the edge with a marker and see if you're going too high or too low. practice makes perfect in that case.

-
thank you Styx, some good info there for me to digest.
-
It doesn't have to be...
Diamond coated file from a Leatherman Charge.
<a href="https://flic.kr/p/DJeYFh" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1674/24763220366_74941b8531_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I hear you, wanted to buy the Spyderco Sharpmaker, thought it was about N$1000, turns out I would pay over N$2000.....simply can't justify that.....
https://www.dmtsharp.com/sharpeners/pocket-models/mini-sharp/I bought a Red and Green of these, not cheap either but sufficient - you don't need more than these and a strop for a Mora.
-
this is all becoming very expensive
It doesn't have to be...
Diamond coated file from a Leatherman Charge.
<a href="https://flic.kr/p/DJeYFh" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1674/24763220366_74941b8531_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
i think my problem is more lack of knowledge/skill rather then the tools to do the job - hence lots of questions but i guess i keep you guys amused at leaset :)
-
Somebody already mentioned a Lansky turnbox. They're cheap as chips,and work good! Victorinox do a combo ceramic sharpener/stone for under a tenner. It's really easy to use and great for SAKs.
If you can spend a bit more,the Lansky system with the different honing stones is excellent!
-
norton india stones and crystolon stones are also fairly inexpensive and work very well
and this idea might get you situated for free (if you can find a brick)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
i probably have a few bricks laying around somewhere but i think i'll give that a pass :)
ok, right now trying to decide between the Lansky turnbox LCD5D and the Fallkniven DC4 both about €25 ish or so with shipping, give or take a little . . . . . i'm think the Fallkniven DC4 . . . . . .

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
