What did you use your Sak on today?
-
Used the Climber to open cans to make some homemade spaghetti. Halfway through the cans, wished I had grabbed a Wenger instead. :-\ The climber now smells like garlic.


-
'Tis the season for a little Eiswein after dinner. The new 2014 130th Victorinox Anniversary Woodsman gets its first task opening the wine bottle! (I also have a 35 year old Woodsman with a few slight differences due to 3-1/2 decades separating them with minor revisions to some of the tools.) If you're wondering what Eiswein is, Wikipedia has a marvelous article on it. I discovered Eiswein when I was living in Germany quite a few years ago. Seemed appropriate in more ways than one :)

-
Used the hook on my Compact to get cotton out of an Advil bottle, and later the combo tool went to work on a can of tuna.

-
@Smaug said:
Aren't Bud Light bottles twist-off? ???Also, if you have good enough taste for a genuine/original Swiss Army Knife, what are you doing drinking that garbage beer?

Helped with
luncha beverage at lunch.....It seems like SAK guys here don't ever eat apples by hand any more... :D
I'll take these in order.....
-
Not if you have RA.
-
I like garbage beer, it saves me enough money to buy 100's of SAKs a year.
-
The use of tools separates us from the animals and a quartered apple is perfect to share with your grand-kids and the dogs.
Did that cover it? :D
-
-
More apples....
-
closest thing I have to a green mango 
-
Aren't Bud Light bottles twist-off? ???
Also, if you have good enough taste for a genuine/original Swiss Army Knife, what are you doing drinking that garbage beer?

Helped with
luncha beverage at lunch.....It seems like SAK guys here don't ever eat apples by hand any more... :D
I'll take these in order.....
-
Not if you have RA.
-
I like garbage beer, it saves me enough money to buy 100's of SAKs a year.
-
The use of tools separates us from the animals and a quartered apple is perfect to share with your grand-kids and the dogs.
Did that cover it? :D
Not to mention apples are good for the doggies. Mine loves them.
-
-
Fire starting.

-
Most kitchen sink cabinets have a couple of panels just under the edge of the counter above the doors to the cabinets below the sink. These panels can be hinged to hold a small tray with scrubbers, scratch pads, cleaning brushes, etc. Provides just a little more convenient storage right at the sink, but keeps it out of sight, and you don't have to rummage around in the cabinet below for these things. Found the knob one of them loose this evening!

This is a job for the new Workchamp, and this will be its maiden voyage!

Oops . . . the screws holding the tray are also loose for some reason. We'll just tighten them a little . . .

The Workchamp comes through and prevents me from having an OCD fit over a loose pull knob (which drives me crazy). I'm impressed with it and will have to write up a review on it after I get to use it a little more. A couple things I would modify a little, but they're nits. Glad I didn't get the "XL" version as the handle on this one is nearly perfect in width, and its got a very good tool set.
John
-
I used my oh soldier to open a cat food sample containter that came in the mail..
-
I opened a packet of biscuits.
-
I used the backstrap philips screwdriver to work on our pellet stove.
-
@jalind said:
This is a job for the new Workchamp, and this will be its maiden voyage!The Workchamp is my favorite large SAK, despite not having the sweet rubber-edged scales.
Oops . . . the screws holding the tray are also loose for some reason. We'll just tighten them a little . . .The Workchamp comes through and prevents me from having an OCD fit over a loose pull knob (which drives me crazy).
A tip for next time this happens: have a little tube of blue thread locker handy, so you don't have to redo it every 6 months.
-
I used my Manager to tighten some screws holding a plastic shield over a gate operator's control box. They didn't need to be too tight, but this was much faster than using my fingers.
-
This switch on the left is one of two switches controlling the main hallway lights in a "two-way" circuit, which means you can turn the lights on at one end and turn them off at the other. If wired correctly, when one is up and the other is down the lights will be on. When both are up or both are down, the lights should be off. For the past 20 years, it's been wrong and it's been like a tiny piece of gravel in my shoe (I have Princess and the Pea feet in spite of 20 years of being a ground pounder). So, tonight I decided it was time to fix it. Doesn't need to be rewired, just flip the switch over, and Bob's your Uncle.

Some like it hot, but I don't. Got blown across a room one time when a knuckle on a finger brushed across the plate cap on one of the final tubes in a 500 watt HF transmitter while I was neutralizing it (a task that requires power on and key down). It was about 750 volts with about 700 milliamp capacity and it wasn't just DC, it was RF too, which caused one hell of an RF burn. Increased my respect for electricity that day. So, a trip to the breaker box ensures two breakers are pulled (each switch in this box is on a different breaker circuit).

I'm wearing the new Delemont Evo 23 today, so it gets its maiden voyage with this task. The problem here is the cover screws are set down deep into the cover plate. The normal flat-tip on the bottle opener it too big to fit all the way into the hole. No problem, the Evo 23 magnifier has a long narrow flat-tip that can loosen the screws enough that the larger flat-tip can finish removing them.


Pull the switch out just far enough to flip it over and put it back without kinking or nicking the wiring inside the box . . .

For those in the U.S. and presumably Canada, the "red" wire is used on a two-way circuit as the 2nd "traveler" wire between the two switches, which is why it's red, and not black or white. It's considered potentially just as hot as the black wire if the power is on. Now that the switch has been inverted, it's time to put it back together, turn the breakers back on and perform the "Smoke Test." Other switch down at the far end of the hallway, this one up, we have light, and no smoke is leaking out of the wiring.

Put the cover plate back on using the driver tip on the magnifier and we're done!

The Delemont Evolution 23 earns its stripes today. What a handy, compact SAK!
John
-
Needed to get a new package of lox open for breakfast, and naturally reached for what I was carrying . . . the Delemont Evo 23

Needed to slice it as well, so instead of getting another knife . . .

John
-
Opportunity presented itself for lunch today. My Ranger pulled through and chili was served with our hotdogs. Did we have a dedicated can opener? Perhaps, but what's the fun in that [emoji4]
Sent from my electronic multi-tool.

-
The one day I decide to leave without my ZT0350 and carry only my Cadet, THE ONE DAY, I had to cut up 4 32 square foot industrial cardboard boxes. Ouch. I also opened a can of tuna.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

