Opinions needed please?
-
I kinda got to chime in here, since I actually own a Vietnam Thawk. I actually do like mine however it is very limited in the practical uses that you would have in the bush. The blade is designed to primarily cut into soft tissue, and bone. Not hardwood, and you will find that it will hang up on wood so that after every other stroke you really have to wrench it free.
However I also have pet peeve over the fiskers and the gerber axes. Yes they are strong, however they really are hard to control, and also very hard on the elbows with the shock. I know that Those companies claim that shock is kept at a minimal, and just like the suspension I wish you to try a side by side with like hatchets.
So I feel wood is the best answer, Now for heads. Unfortunatly most companies use a forging method that is not as structuraly sound as the old hammer and anvil. tjhey really dont have a ton in carbon, which makes a sharper blade from repeated firings. And the heads on the axes really are not as good as the old ones.
So what I would do is go to a Flea market, or yard sale and find an old hatchet head that is rusted and beat to hell (less than 5 bucks). Take it home clean it sharpen it and re haft it in wood(10 bucks).
By the way someone most likely will say that wood is too suseptible to the weather. However. I have two gentlemen that have seen a 1950S head that was rehafted 3 years ago and sealed properly. It resides in the stump at my camp and has been rained on constantly. The wood is grey, but still tight and straight.
-
Thanks for that John

I did think they might be a bit limited at splitting due to the size of the eye relative to the taper of the blade, but I didn't know they were prone to sticking :-\
Food for thought

-
However the spike is also way cool. But just treat the handle.
-
@hawkchucker said:
However the spike is also way cool. But just treat the handle.As long as there's an upside :D
-
hmmmm somehow i remember offering Mike this old axe head :D
the guy said no ;)
-
@Tarrodemierda said:
hmmmm somehow i remember offering Mike this old axe head :Dthe guy said no ;)
It'd cost a fortune to post, thats why :D
-
GIMME. =O
-
@micky d said:
hmmmm somehow i remember offering Mike this old axe head :D
the guy said no ;)
It'd cost a fortune to post, thats why :D
maybe not ;)
-
@micky d said:
hmmmm somehow i remember offering Mike this old axe head :D
the guy said no ;)
It'd cost a fortune to post, thats why :D
maybe not ;)
Well if you insist :D
-
Nooo, I insist.

-
@micky d said:
Any opinions on the Vaughan HatchetVaughans are very small pocket hatchets...I have one that was modified by BRKT. Handy and easy to carry, but it would take more effort to do the same amount of work as a standard hatchet.
Here it is alongside an old Gerber/Fiskars Sport Axe and a Wetterlings.


-
Another pocket axe I have is the Norwegian Øyo Mini-Viking. Although the same overall size as the Vaughan/BRKT, it is more substantial in both head and handle. I haven't had a chance to really use it yet but I like it better because of that.




-
@SporK said:
Another pocket axe I have is the Norwegian Øyo Mini-Viking. Although the same overall size as the Vaughan/BRKT, it is more substantial in both head and handle. I haven't had a chance to really use it yet but I like it better because of that.Thank's for that mate :)
The Viking axe looks really effective with that head design :), sort of a bodkin head :), are they still available do you know

-
I think it is a new model that just came out recently, I bought mine from Ragnar.
They are also available at Knife Heaven
-
@micky d said:
yes its ROSELLIINI,quite handy and nice looking old school axe.69 euros.with a sheath,few euros more.
and if i order one,i have coupon that gives this below with it.for free :D
so if youre intrested in this....PM,Mike.
http://www.varuste.net/tuotetiedot2.asp?_prodid=681&_omin1=0&_omin2=0&_omin3=0
That's a bit tasty

Just my 2p worth here. I have a Trailhawk and, whist I really like it, it's just not a tool for splitting. The thin blade to the very round eye is just too much. Other than that I have a GB SFA, I'm just guessing that this is a bit bigger than you were thinking off. As often as not the axe I go for is a no-brand wooden halved hatchet I picked up from a local hardware shop years ago.
Lastly the above knife is a personal favourite, I have used more expensive, and own a nice custom piece but this is the one I tend to pick up. If it's not too cheeky may I post a link to a review I did on another site.
http://www.britishblades.com/forums/showthread.php?t=58204
Mods please feel free to remove.
PS that Mini Viking looks like the dog danglies!
-
Yep I read that review a while back :), bloody fine work mate

I've got a Lynx (thanks Mikko) and there great aren't they :)
Yep I want to get an SFA at some point, but I really need a small lightweight hatchet for now, as I think that's gonna be better for my needs than a tomahawk at this point :)
-
I remember looking at one of these is my local Dobies Garden Centre a good while back. Seemed like a reasonable bit of kit for the money.
No connection to the above seller, just the first one I found on Google.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login