SwissTools Saturday!
-
This morning I was going through a junk drawer looking for stuff to throw away and I came up with this little cell phone case that I used with a Motorola Star-Tac about 100 years ago. My hand was over the trash can when I caught myself. It is nearly the perfect size for the Spirit and the Huntsman and there's room to spare for a bit kit (if I had one), or a business card case or something else that size. It also has loops on the outside for a pen or pen light or maybe a ferro rod. It is pretty damn awesome to find something you haven't seen in 10 or 12 years and be able to put it back into use. I'm very pleased with myself right now. And I even remembered to carry the Spirit on Swiss tool Saturday!
-
Great pouch!!!!

-
A near tragedy occurred last Saturday while I was wearing this pouch. I was working at the Florida Renaissance Festival as I will for the next 6 weekends, and because I don't have pockets in my reenactment garb (I was dressed in 16th century sailor's slops for the pirate themed weekend) I was wearing cargo shorts under the outfit. Since I had the shorts on I left the pouch attached to my belt under my garb. At some point I happened to look down and see a red SAK on the ground near where I was working. Then I saw the green paracord fob and realized it was my own! It had slipped out through the gap and I hadn't felt it fall because I was wearing so many layers. My outfit is similar to this museum display picture except for the colors.
If you find an old cell phone pouch like this one, don't use it before you make sure your multi tools and knives can't fall out of it. I will continue to use this pouch, but only after I sew an elastic band between the bottom and sides to close up the gaps.

-
Swisstool x everyday :D

-
@anditsgone said:
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
-
Been carrying my spirit all day



-
Swisstool x everyday :D
Nice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

-
Swisstool x everyday :D
Nice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
-
Swisstool x everyday :D
Nice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
I agree about the pocket clips, i guess they find that it ruins the clean look of their tools.
I have seen some people mod a pocket clip to it. I am not sure if there is a way to glue a pocket clip to a tool.
The industrial glue these days is extremely strong, even car bodies are made of glued pieces. -
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
I agree about the pocket clips, i guess they find that it ruins the clean look of their tools.
I have seen some people mod a pocket clip to it. I am not sure if there is a way to glue a pocket clip to a tool.
The industrial glue these days is extremely strong, even car bodies are made of glued pieces.
[/quote]I added a NiteIze clip to my STX and it is holding up great. It just uses some VHB tape and requires a nice clean surface (ie alcohol wipe) to adhere to. I didn't rough up the surface either. Been going for about 8 months of use now.
Just make sure to let the tape set for the required 3 days for maximum adhesion. -
[quote author=twiliter link=topic=59469.msg1230129#msg1230129 date=1455998417]
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
I agree about the pocket clips, i guess they find that it ruins the clean look of their tools.
I have seen some people mod a pocket clip to it. I am not sure if there is a way to glue a pocket clip to a tool.
The industrial glue these days is extremely strong, even car bodies are made of glued pieces.
[/quote]I added a NiteIze clip to my STX and it is holding up great. It just uses some VHB tape and requires a nice clean surface (ie alcohol wipe) to adhere to. I didn't rough up the surface either. Been going for about 8 months of use now.
Just make sure to let the tape set for the required 3 days for maximum adhesion.
[/quote]i need one of these clips as think i would carry the spirit more if it had a clip

-
[quote author=anditsgone link=topic=59469.msg1230194#msg1230194 date=1456004957]
[quote author=twiliter link=topic=59469.msg1230129#msg1230129 date=1455998417]
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
I agree about the pocket clips, i guess they find that it ruins the clean look of their tools.
I have seen some people mod a pocket clip to it. I am not sure if there is a way to glue a pocket clip to a tool.
The industrial glue these days is extremely strong, even car bodies are made of glued pieces.
[/quote]I added a NiteIze clip to my STX and it is holding up great. It just uses some VHB tape and requires a nice clean surface (ie alcohol wipe) to adhere to. I didn't rough up the surface either. Been going for about 8 months of use now.
Just make sure to let the tape set for the required 3 days for maximum adhesion.
[/quote]i need one of these clips as think i would carry the spirit more if it had a clip

[/quote]I'm used to pocketing the Spirit now, so a clip would be nice, but is not absolutely necessary. There are some excellent clip mods, the latest (and cleanest) one I have seen recently is Hiraethus' here >> /topic/64612 . The adhesives these days are pretty amazing, so that's an option too, but I think a factory mounted one would be sweet, like the Sentinel has. A removable one like the Wave/Charge/Surge clip would be even better. Since Vic has already capitalized on the LM idea, it would be nice to see them evolve and compete a little quicker in the market.

-
[quote author=twiliter link=topic=59469.msg1230479#msg1230479 date=1456063685]
[quote author=anditsgone link=topic=59469.msg1230194#msg1230194 date=1456004957]
[quote author=twiliter link=topic=59469.msg1230129#msg1230129 date=1455998417]
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
I agree about the pocket clips, i guess they find that it ruins the clean look of their tools.
I have seen some people mod a pocket clip to it. I am not sure if there is a way to glue a pocket clip to a tool.
The industrial glue these days is extremely strong, even car bodies are made of glued pieces.
[/quote]I added a NiteIze clip to my STX and it is holding up great. It just uses some VHB tape and requires a nice clean surface (ie alcohol wipe) to adhere to. I didn't rough up the surface either. Been going for about 8 months of use now.
Just make sure to let the tape set for the required 3 days for maximum adhesion.
[/quote]i need one of these clips as think i would carry the spirit more if it had a clip

[/quote]I'm used to pocketing the Spirit now, so a clip would be nice, but is not absolutely necessary. There are some excellent clip mods, the latest (and cleanest) one I have seen recently is Hiraethus' here >> /topic/64612 . The adhesives these days are pretty amazing, so that's an option too, but I think a factory mounted one would be sweet, like the Sentinel has. A removable one like the Wave/Charge/Surge clip would be even better. Since Vic has already capitalized on the LM idea, it would be nice to see them evolve and compete a little quicker in the market.

[/quote]Yeah there tools are great but i sometimes think they are a bit scared of innovating their tools due to their heritage and of course their current tool still works great

I do really like the pocket clip by hiraethus, but i will probably void my baby's warranty :D
I will keep a lookout for pocket clips that can be easily glued to the surface of the tool. I don't think sanding a piece of the handle will void the warranty.You can probably get strong 2 components glue at automotive stores.
I have already come up with a plan. I have an old stainless springsteel metal plate laying around that comes out of the sole of a safety boot.
I might cut that to the right dimensions, bend it in to the shape of a pocket clip and use 2 component glue to glue it to the handle.
Although i dont really mind the pock clip i might try to make a prototype later this week to see if it is possible. -
Swisstool x everyday :D
Nice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
The Nite-Ize clip works well. I put one on mine, but I still find heavy. Guess I have no pics of it....
Sent from my SM-G920R4 using Tapatalk
-
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
The Nite-Ize clip works well. I put one on mine, but I still find heavy. Guess I have no pics of it....
Sent from my SM-G920R4 using Tapatalk
[/quote]Yeah i already looked for a clip but the nite ize hipclip is not available in holland :-[
-
[quote author=twiliter link=topic=59469.msg1230129#msg1230129 date=1455998417]
[quote author=anditsgone link=topic=59469.msg1230011#msg1230011 date=1455985745]
Swisstool x everyday :DNice! If I were to pouch carry regularly, an STX would be in the rotation without a doubt. :)
Truth is i don't even pouch carry it. It rides my jeans pocket 7 days a week. Because the tool is relatively slim but long i barely notice its there. A Supertool 300 is much wider, the stx almost fits inside the handle of the st300 if i am not mistaken.

I carry the Spirit a lot in my pocket, but the STX is heavier and boxier, so not comfy for me. If it had a clip I would carry it that way, the Surge was much easier to carry with a clip than I expected. Wish I could figure out what Vic has against pocket clips... ???
The Nite-Ize clip works well. I put one on mine, but I still find heavy. Guess I have no pics of it....
Sent from my SM-G920R4 using Tapatalk
[/quote]Yeah i already looked for a clip but the nite ize hipclip is not available in holland :-[
[/quote]
Oh that stinks man :(Sent from my SM-G920R4 using Tapatalk
-
If the Spirit isn't the perfect MT, then I don't know if there is one. :D
Carrying it today, and most days anymore.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


