What did you use your Sak on today?
-
This switch on the left is one of two switches controlling the main hallway lights in a "two-way" circuit, which means you can turn the lights on at one end and turn them off at the other. If wired correctly, when one is up and the other is down the lights will be on. When both are up or both are down, the lights should be off. For the past 20 years, it's been wrong and it's been like a tiny piece of gravel in my shoe (I have Princess and the Pea feet in spite of 20 years of being a ground pounder). So, tonight I decided it was time to fix it. Doesn't need to be rewired, just flip the switch over, and Bob's your Uncle.

Some like it hot, but I don't. Got blown across a room one time when a knuckle on a finger brushed across the plate cap on one of the final tubes in a 500 watt HF transmitter while I was neutralizing it (a task that requires power on and key down). It was about 750 volts with about 700 milliamp capacity and it wasn't just DC, it was RF too, which caused one hell of an RF burn. Increased my respect for electricity that day. So, a trip to the breaker box ensures two breakers are pulled (each switch in this box is on a different breaker circuit).

I'm wearing the new Delemont Evo 23 today, so it gets its maiden voyage with this task. The problem here is the cover screws are set down deep into the cover plate. The normal flat-tip on the bottle opener it too big to fit all the way into the hole. No problem, the Evo 23 magnifier has a long narrow flat-tip that can loosen the screws enough that the larger flat-tip can finish removing them.


Pull the switch out just far enough to flip it over and put it back without kinking or nicking the wiring inside the box . . .

For those in the U.S. and presumably Canada, the "red" wire is used on a two-way circuit as the 2nd "traveler" wire between the two switches, which is why it's red, and not black or white. It's considered potentially just as hot as the black wire if the power is on. Now that the switch has been inverted, it's time to put it back together, turn the breakers back on and perform the "Smoke Test." Other switch down at the far end of the hallway, this one up, we have light, and no smoke is leaking out of the wiring.

Put the cover plate back on using the driver tip on the magnifier and we're done!

The Delemont Evolution 23 earns its stripes today. What a handy, compact SAK!
John
-
Needed to get a new package of lox open for breakfast, and naturally reached for what I was carrying . . . the Delemont Evo 23

Needed to slice it as well, so instead of getting another knife . . .

John
-
Opportunity presented itself for lunch today. My Ranger pulled through and chili was served with our hotdogs. Did we have a dedicated can opener? Perhaps, but what's the fun in that [emoji4]
Sent from my electronic multi-tool.

-
The one day I decide to leave without my ZT0350 and carry only my Cadet, THE ONE DAY, I had to cut up 4 32 square foot industrial cardboard boxes. Ouch. I also opened a can of tuna.
-
Been getting mine at WalMart . . . don't know if it was seasonal or not . . . I bought the last they had - five packages - last time I was there, so I'll have to see if it gets restocked next time I'm near there (normally do not go to WalMart for anything). You may want to look there if one is near you.
John
-
No pics but I used the pen on my Explorer to sign a Geocache log today. Also used my Farmer to open a tin of baked beans and cut up some sausage rolls.
Cheers
Jon
-
Used a Midnight Minichamp to peel a Mandarin orange. The Minichamp's hooked blade works superbly well, much better than the plastic Tupperware giveaway tool for it!

It made short work of the Mandarin peel . . .

I made short work of the Mandarin!
JohnNote:
No apples were harmed in the making of this photo shoot. -
Went to get some burger patties out of a tube of them in the freezer, and as is typical when they get down to the last half-dozen or so in a tube of 16, they're quite solidly frozen together.

Splitting them apart is a PITA, and many do it with varying results using a table knife. Time for another round of burger batoning. This time, though, it's a task for the Hunter Pro, with its wedge shape blade edge and thick back.

The blade is a good length for this and it gets in between the patties nicely

Very quickly we're down to the very last one and as usual it's the most solidly frozen requiring some effort on the blade back . . . some real burger batoning!

It finally gives way and the two split apart . . . we're done . . . and it was much easier than using a weak-kneed table knife!

John
-
My Explorer got used to skin a Furby this morning ready for open speaker surgery.

Cheers
Jon
-
The newly modifed MiniChamp made short work of a Mandarin orange peel. I made short work of the orange. This MiniChamp has Classic sapphire scales on it now with T&T making it much thinner than a Midnite MiniChamp and not much thicker than a Rambler. Had some pulp in my teeth and used the toothpick afterward.


John
-
Used the scissors on my MiniChamp to open my instant coffee packet, the Philips head tool to open my youngest son's battery bay on his remote control truck and the blade to open a letter.
-
Me and my Soldier played with fire.


-
nice pics. interesting firesteel too. a combination of an actual firesteel, magbar and fatwood?
-
@styx said:
nice pics. interesting firesteel too. a combination of an actual firesteel, magbar and fatwood?African Padauk wood. The guy that makes them sells them in the vender section on Bushcraft usa.
http://bushcraftusa.com/forum/forumdisplay.php/261-Hemlock-s-HideawayThis is my favorites fire starter.
-
Love this stuff

-
This kitchen cabinet door with Euro style hinges would not close all the way.

Efforts to tweak the springs and other adjustments were for naught. Time to replace the hinges. This is a job for the 111mm Work Champ (this one in sterile OD livery)

Upon removing the door and old hinges we find under the lower hinge . . . the installer had broken off a screw head attaching it to the cabinet frame, just left it in place, and drove another at an angle below it.


Good thing the Work Champ has pliers, so we can do what the cabinet installer should have done nearly 20 years ago

We also do with the screws going into the solid oak cabinet frame what the original installer should have done to prevent torquing a screw head off. Just a little bit of bar soap on the screw threads will prevent them from binding in the wood. Acts as a lubricant and as friction heats up the screw, the soap becomes fluid. Amazing how this works!

New hinges were attached to the door, and then the door was mounted to the cabinet frame. It now closes completely as it should.

Some failure analysis on the old hinges to determine why they failed. Turns out the bushing on the lower one that is needed for the spring to keep the door closed had cracked and broken. The piece fell out as I was removing the door, and the analysis showed where it had come from. The screw with missing head may have contributed as it kept the hinge mount from being flush with the door frame, allowing it to rock, but that's a stretch with no real evidence to back it.

John
-
Right on John!!!!!

-
To hold my beer money.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
