What Gerber did you carry today ?
-
The Flik is a fine Gerber mt.
-
My Flik has been living in the car along with my Supertool 200.
Sent from my SM-G920R4 using Tapatalk
-
MP600 8)
-
The Shortcut is in the pocket today, backed up by a Juice on the belt.

-
The MP series are tougher than most people give them credit for

All the ones I've had haven't failed yet, and I have done some really ugly things with them...


-
OK. First workday carrying Gerber FliK.
Used it four times.
Once I needed the phillips screwdriver. Didn't (gladly) need any reach, just four simple screws. It opened those, but the fit wasn't perfect. I might modify that tool later on, make it a bit sharper.
Used the knife also. Its pretty good actually when you punch a hole to a plastazote foam. Nice and prety clean cut. Of course it always could be even sharper.
Used the pliers also few times, thay are ok. The grip is fine. The sideplay lessens a much when you actually take a good grip of those. -
-
Being blunt today


These jaws open a lot wider than any other MT I've seen. They're awesome for many tasks I can't use the Spirit for...


But the hard wire cutters are crap >:(
-
BN MP600 again, used it to pry open some old LM CORE tools that were all gunked up.

I've now cleaned it and plan on getting it on the EDC system, instead of carryng the SOG Blacktip. I also like having two so different blade shapes to work with.


It's definitely my favorte gerber MT!

-
Did they change back to cutouts on the file and blades? No more nailnicks? Maybe this will be introduced to the MP400 soon, so you won't have to take a dremel to the blade to get a nailnick on it.
EDIT: Oh wait, guess that's an old version. An old version that looks better than the current version. Altho a cutout in the file isn't a good idea, so they could leave that one alone.

-
I carried a Gerber MP800, a tool which I rarely carry or use.
It has a good selection of tools, but the MP800 is big. The handles are so wide that it won't fit in many of my favorite belt cases. I carried it horizontally in a CLC belt case.

-
Today I carried my Gator Machete Jr and the Propel.
And I finally broke one of them. Well, not broke, but it's not coming back from this.
Could I warranty it? Yeah, probably. But it has been abused since day one. Machetes with thin edges were never meant to be used for wood prep, but this one has been used to de-limb hundreds of saplings and larger trees. It's been in contact with rocks (by mistake) a bunch of times. And today, the metal finally gave up.Yes, the Gator Machete Jr is dead. Quite a shame really, because while it worked I liked it a lot. It made removing small branches and whatnot a breeze, but I think hacking away at all those 2" branches is what finally did it.
So basically, machetes should not be used to process wood! If you want to do that sort of thing, get a Gerber Bolo machete or a Kershaw Camp 10. Those are quite beefy and the edge will not deform on those. Or just use a small, lightweight axe, such as the Fiskars X7.


-
Wow nice job on that one! I'd beat it flat with a hammer.
-
that is a lot of weakened metal. kinda looks like a very iffy HT
-
It's weird because I beat the crap out of this thing for a long time last year, but this time it sort of gave up after just 2 hours of work. Maybe it had been weakened over time and once it starts to bend there's no going back.
I could probably straighten it out, but I'm sure it would just bend again if I use it on wood. So I'm not really sure what to do with it. In Sweden you don't really do a whole lot of brush clearing. So I kinda bought this one just for smurfs and giggles if I'm honest. Oh well, next time I'll bring my Kershaw Camp 10 instead.
-
Wasn't exactly carrying it, but my Gerber multi-plier resides in an EDC bag that contains items I may need when I'm participating in historical re-enactments and that includes the Renaissance festival where I was today when I needed to repair a wagon. Mr. Pinchy turned a bolt while I held the nut on the other side with a Leatherman Wave. Not enough hands to take pictures of both tools in action so I took a working picture of the wave for the March challenge, but here's Mr. Pinchy in the wagon after I removed the bolt.
-
@Alan K. said:
Wasn't exactly carrying it, but my Gerber multi-plier resides in an EDC bag that contains items I may need when I'm participating in historical re-enactments and that includes the Renaissance festival where I was today when I needed to repair a wagon. Mr. Pinchy turned a bolt while I held the nut on the other side with a Leatherman Wave. Not enough hands to take pictures of both tools in action so I took a working picture of the wave for the March challenge, but here's Mr. Pinchy in the wagon after I removed the bolt.Pretty sure that isn't time-period appropriate...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



