Show us your Billhooks, Slashers, Machetes
-
When I was looking at the Condor range I definitely considered that one.

I like it but hate that it's convexed...... :(
You don't like it because its convexed?
I thought a convexed edge was best
Nice one Steve

It probably is but I don't want the best on these kind of tools. I want something I can hit a few licks with a mill smurf file and keep going instead of relearning how to sharpen it. Always have a file around the farm or in my gear.
Oddly enough I've already attacked my Condor with a file (after accidentally attacking a stone with the Condor) and found the steel pretty soft and easy to work on. I'd even go so far as to say that compared to a knife it's too soft, but as a machete then I think it's OK.
-
Here's my billhook that a friend recently gave me

Sent from my iPhone using Tapatalk
-
well you're ready for the zombie apocalypse
-
Yeah that would be my first choice for close quarters zombie killing
Sent from my iPhone using Tapatalk
-
That's a cracker mate.

-
Cheers buddy
Sent from my iPhone using Tapatalk
-
Nice one Weasel


-
-
Yours looks like a good heavy one to me Mate

I have just found this artical that you might find interesting Eamo
Looks like yours is a Devon Billhook,
Billhooks are a tool for cutting or splitting green wood; they are something between a knife and an axe. They were traditionally used to coppice thin wood for animal feed and bedding, split hazel for making hurdles, cut fencing stakes, thatch roofs, make rough furniture and cut thin firewood, such as smurfs which were used in bread ovens. In continental Europe they are a traditional tool for pruning the grape vines that were needed for wine-making. The hooked end makes it easier to catch cut pieces of brush and flip them in the right direction.
Medieval Italian using a billhook (Photo from billhooks.co.uk)
As the most widely available edge tool the billhook would also have been the principle weapon of self-defence for the medieval English peasant, and is often said to have been the main weapon used in the English civil war. Big orders were placed by the government as late as World War I, where they were used to clear scrub and cut stakes for trench construction.
These days, volunteers on OCV tasks use billhooks mainly for trimming the side branches of hedge-laying stakes (snedding) and for hedge-laying itself. The billhook is a very versatile tool though perhaps one of the more tricky to use for us volunteers with weak 21st century arm muscles and not having had too much practice. Quite a lot of strength is required to use one effectively for significant lengths of time, and there is a risk of doing yourself or someone else serious injury with the sharp blade. The main risks are cutting your other hand, hitting your legs or cutting your fingers fishing one out of a bag of tools.
In days gone by there were thousands of different patterns of billhooks used in different parts of the British Isles and in Northern Europe and other parts of the world, including those that were colonised by Northern Europeans. In many cases this would match the local style of hedge-laying, though it would be hard to say which came first since people would pass down both the tools and the technique.
Although there are patterns named after many of the English counties, in fact, there was probably a different style being made by each village blacksmith. They eventually gave way to small manufacturers who made tools in larger numbers, perhaps with forges powered by waterwheels. There might only be a few of these tool makers in each county, so the tradition continued. In the 19th century, mass production took over from small manufacturers, and production of bladed tools took place in cities like Sheffield. Farming was still not mechanised, and a large number of people still lived and worked in the countryside so there was still great demand for hand tools in the countryside and with different areas requiring different styles, the big toolmakers produced catalogues boasting of hundreds (and sometimes thousands) of patterns of billhook they had available.
As demand for hand tools dropped off in the latter part of the 20th century fewer different patterns remained available. Nowadays, choice is quite limited if you’re looking for a new tool rather than a museum piece which you might pick up at a market or on eBay. But you will still certainly be able to find these general patterns:
7 different patterns of billhook
It’s sometimes still useful to know which is which. On OCV tasks that’s normally because we’ve managed to lose one and we want to know who saw it last. Or sometimes we end up with a bit of particularly tough bit of hedgelaying that means we have to find out who’s got a Yorkshire billhook – the only one that can be used two-handed.

-
Very interesting Sparky ! I had to google hedgelaying.
-
Bill hooks were a real multitool of the countryside in the old days,
they came in a huge amount of different shapes and sizes for many jobs- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
A couple of interesting sites :salute:
-
That led to this one
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@Sparky415 said:
Yours looks like a good heavy one to me Mate
I have just found this artical that you might find interesting Eamo
Looks like yours is a Devon Billhook,
Billhooks are a tool for cutting or splitting green wood; they are something between a knife and an axe. They were traditionally used to coppice thin wood for animal feed and bedding, split hazel for making hurdles, cut fencing stakes, thatch roofs, make rough furniture and cut thin firewood, such as smurfs which were used in bread ovens. In continental Europe they are a traditional tool for pruning the grape vines that were needed for wine-making. The hooked end makes it easier to catch cut pieces of brush and flip them in the right direction.
Medieval Italian using a billhook (Photo from billhooks.co.uk)
As the most widely available edge tool the billhook would also have been the principle weapon of self-defence for the medieval English peasant, and is often said to have been the main weapon used in the English civil war. Big orders were placed by the government as late as World War I, where they were used to clear scrub and cut stakes for trench construction.
These days, volunteers on OCV tasks use billhooks mainly for trimming the side branches of hedge-laying stakes (snedding) and for hedge-laying itself. The billhook is a very versatile tool though perhaps one of the more tricky to use for us volunteers with weak 21st century arm muscles and not having had too much practice. Quite a lot of strength is required to use one effectively for significant lengths of time, and there is a risk of doing yourself or someone else serious injury with the sharp blade. The main risks are cutting your other hand, hitting your legs or cutting your fingers fishing one out of a bag of tools.
In days gone by there were thousands of different patterns of billhooks used in different parts of the British Isles and in Northern Europe and other parts of the world, including those that were colonised by Northern Europeans. In many cases this would match the local style of hedge-laying, though it would be hard to say which came first since people would pass down both the tools and the technique.
Although there are patterns named after many of the English counties, in fact, there was probably a different style being made by each village blacksmith. They eventually gave way to small manufacturers who made tools in larger numbers, perhaps with forges powered by waterwheels. There might only be a few of these tool makers in each county, so the tradition continued. In the 19th century, mass production took over from small manufacturers, and production of bladed tools took place in cities like Sheffield. Farming was still not mechanised, and a large number of people still lived and worked in the countryside so there was still great demand for hand tools in the countryside and with different areas requiring different styles, the big toolmakers produced catalogues boasting of hundreds (and sometimes thousands) of patterns of billhook they had available.
As demand for hand tools dropped off in the latter part of the 20th century fewer different patterns remained available. Nowadays, choice is quite limited if you’re looking for a new tool rather than a museum piece which you might pick up at a market or on eBay. But you will still certainly be able to find these general patterns:
7 different patterns of billhook
It’s sometimes still useful to know which is which. On OCV tasks that’s normally because we’ve managed to lose one and we want to know who saw it last. Or sometimes we end up with a bit of particularly tough bit of hedgelaying that means we have to find out who’s got a Yorkshire billhook – the only one that can be used two-handed.
Thanks Sparky, very interesting, a lot of history and technique behind my billhook so :)
I had always thought a billhook was a sickle style tool didn't know there were different styles. I get what the article says about 21st century muscles too, theres weight in mine, i'd definitely find it hard to keep using it for a couple hours, let alone a full day.I've sharpened it using a file and my lansky puck even though i can't see myself using it and i think i'll sand it at some stage to shine it up :)
-
Rust removal?
This thread might be of interest to you Eamo ;)/topic/41665
-
@Sparky415 said:
Rust removal?
This thread might be of interest to you Eamo ;)/topic/41665
oooh thanks Sparky
- bookmarked -
Sparky, did i see a pic of a billhook very similar to mine on the car boot finds thread, where you had pics of the joiners box you restored ?
-
I’ve just had a look at that picture, yes looks like it,
it might be in my ummm collection somewhere unless I’ve swapped it with someone
I will take a look if your interested

-
@Sparky415 said:
I’ve just had a look at that picture, yes looks like it,
it might be in my ummm collection somewhere unless I’ve swapped it with someone
I will take a look if your interested

no, you're grand, just curious was all, thanks

-
You know I'm going to have to see if I can find that one now,
might have to do some clambering ::)
-
@Sparky415 said:
You know I'm going to have to see if I can find that one now,
might have to do some clambering ::)
Sorry
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


