Show off your Sak mod's!
-
Very cool ALM[emoji106]
Sent from my SM-G920R4 using Tapatalk
-
-
@ALM said:
My new project TiRanger 130mm. Two versions of unlocking the blade were made.Lovely work, as usual.

What is the purpose of the wavy edge to the lock release on the button lock version? I've seen that pattern on other linerlocks and don't understand the reason for it. Some kind of stress relief I guess, but I can't figure out how it functionally differs from a straight edge.

-
My new project TiRanger 130mm. Two versions of unlocking the blade were made.
Lovely work, as usual.

What is the purpose of the wavy edge to the lock release on the button lock version? I've seen that pattern on other linerlocks and don't understand the reason for it. Some kind of stress relief I guess, but I can't figure out how it functionally differs from a straight edge.

It's more wavy innit.
-
Where's the smiley for 'looking disapprovingly over glasses at magentus, much like a librarian looks at a noisy schoolboy'?

-
@hiraethus said:
Where's the smiley for 'looking disapprovingly over glasses at magentus, much like a librarian looks at a noisy schoolboy'?
Dunno
-
@hiraethus said:
Where's the smiley for 'looking disapprovingly over glasses at magentus, much like a librarian looks at a noisy schoolboy'?
Use this:

-
Where's the smiley for 'looking disapprovingly over glasses at magentus, much like a librarian looks at a noisy schoolboy'?

Use this:

You could gussy it up like this:
Hiraethus
Magentuspfrsantos

-
Nah, that would be like kicking a puppy that's eaten your newspaper. He doesn't know he's done wrong, the poor thing.
-
@hiraethus said:
Nah, that would be like kicking a puppy that's eaten your newspaper. He doesn't know he's done wrong, the poor thing.Magentus
Hiraethus
pfrsantos
-
Where's the smiley for 'looking disapprovingly over glasses at magentus, much like a librarian looks at a noisy schoolboy'?

Use this:

You could gussy it up like this:
Hiraethus
Magentuspfrsantos

FTFY...
-
Farmer X
I built the SAK based on new parts from Victorinox Alox Pioneer X model 0.8231.26 -
Did some grind work to one side of the scale, to help with the fake spydyhole.


-
Also have some more pics as requested.
An ALM inspired pioneer model. Found out that a 91 spring does indeed fit into a 93:D.


-
This was my first attempt at a small SAK, I fubar'd the blade(ground too much off) so it is a bit off...... and I messed up the countersink
, so I just ground the screws flush with the body: it is NEVER coming apart. Ya live and learn, next one will be better.And the silver SAK is the one i made for my dad the way he wanted it. I still wish he would let me redo it.........




-
@alorora said:
This was my first attempt at a small SAK, I fubar'd the blade(ground too much off) so it is a bit off...... and I messed up the countersink
, so I just ground the screws flush with the body: it is NEVER coming apart. Ya live and learn, next one will be better.And the silver SAK is the one i made for my dad the way he wanted it. I still wish he would let me redo it.........
You gave it a Tanto point? Why?
-
This was my first attempt at a small SAK, I fubar'd the blade(ground too much off) so it is a bit off...... and I messed up the countersink
, so I just ground the screws flush with the body: it is NEVER coming apart. Ya live and learn, next one will be better.And the silver SAK is the one i made for my dad the way he wanted it. I still wish he would let me redo it.........
You gave it a Tanto point? Why?
My dad works in construction and wanted a utility blade: he uses it for scraping.
-
Where do you get screws that are small enough and what is on the other side?
Can you take apart your mods after they're done or are they more permanent like pins?
-
I get some of my parts from knifekits. The screws I used are these, http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=1983. Other parts I get from USKnifemaker too.
I like to make it so you can take apart the knife if it needs to be cleaned or maintained the other benefit I see from it too is, if a component beaks it is easy to replace.
-
Thanks for the information
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
