What did you use your Leatherman for today?
-
We are in the process of repainting the walls and ceiling of the ground floor in my house, and today my new Skeletool saw a ton of use. I pretty much used it to remove all the (painted over) outlet covers in the living room and hallway. Some phillips screws, some flathead, all covers adhered to the wall with paint thanks to my former renter, so the knife blade was used to slice them away from the wall. I even had to use the pliers to undo a really tight co-ax connection. Pretty good break in for a new tool.
-
This one's a good one: On the way back from a friend's place last night at about 10pm, and we stop for a sheep on the road. After waiting around for a few minutes and watching the three other cars nearly swerve off the road because of it, we decided we had to stay around and get it at least over a fence. So we give the local cops a call, it is only a small town so they are the obvious choice for a runaway sheep. Half an hour later they rock up, and we spend another 20 min trying to corner the crazed sheep, before we can drag it through a nearby gate. The cops leave and we go to head home after nearly an hour of waiting around, but the battery had died from having the lights on all that time. By this point its past 11, so we wake up a friend in the nearest town to jump start the car. That takes another 15 minutes, and then it turns out the lever to open the bonnet has broken off again. Luckily I was able to dismantle it and pull the cable through with my wave, we got the bonnet open, the car going and finally went home.
One thing that was weird was how eerie it is to be by a country highway with no light late at night. With the stars and the silence, you could easily imagine you were in the outback, but every 5-10 minutes a car would come flying past inches from us at 100k
-
@bounding star said:
...One thing that was weird was how eerie it is to be by a country highway with no light late at night...You had nothing to fear. It's not as though you were going to get hacked up by a guy in a hockey mask with a machete. Unless of course you or your mate happened to be a blond in a tight fitting, sky-blue, baby-doll nighty. If you were I'd rather not hear about it.
https://www.youtube.com/watch?v=b_kGPh5Hnwg -
I use my wave has a model, a few minutes of my twelve hour shift were passed looking at the details of this beauty...

-
Forced and posed shots. Had been a LONG time without my LM so needed excuses to use it.


-
Dollhouse for my daughter.

-
Where do I start. We finally got a forklift at work, rated for 5k, way more than we needed but a great price


So we finally also got warehouse racks, and they ABSOLUTELY KICKED ARE SMURFS

-
Used the Charge to remove and clean a generator carburetor.

-
I used my Crater blade yesterday to open up a new bag of cat food.
-
My Blast came in handy when I installed a new bathroom sink faucet yesterday

-
Goofing off with fire

-
Pulled this out of my car tyre today.

Bit of chain link, nice.
-
I used the pliers on the Rebar to open my locker at work. The handle has become tight lately and the pliers made short order of getting it open for me.
-
My Camo Blast was tight on one handle, with the siscors, can opener, and Philiips screw driver impossible to be pulled out normally. A pair of Skeletool CX and Juice SC2 came to the rescue. I found the small, thin pliers on these two perfect to hold on to the knurled screws. Half a turn was enough to solve the problem.
You can only apply so much pressure on these pliers, so the knurled screws are safe.
-
Used the ST300 to change out a control station and a coil cord on some doors I was servicing today.

[URL=http://s441.photobucket.com/user/smcclown/media/Mobile Uploads/20160310_105322.jpg.html]
[/URL -
I used the LM Wingman and a cheap chinese MT to unscrew and put a clip from a folder I had into my LM Blast.


As I always carry clipped and loved the Blast, I decided that if it had a clip it'd be carried as the other MTs I have on my rotation.

Gotta try this one for a week!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





