3D design progress
-
Nice looking models.
I've always found sketchup a real PITA to work with so I admire your patience.One of the best ways I've found to familiarise myself with new CAD software is to take a part and some digital calipers and try to replicate exactly what I'm holding in my hand. That way you'll get a feel for both the software and how the part is made.
-
Can you import files? There's a Leatherman Fuse Plastic Model on Etsy that I've always wanted to print somewhere but never have.
-
@hiraethus said:
Nice looking models.
I've always found sketchup a real PITA to work with so I admire your patience.One of the best ways I've found to familiarise myself with new CAD software is to take a part and some digital calipers and try to replicate exactly what I'm holding in my hand. That way you'll get a feel for both the software and how the part is made.
I've been doing that too. That's why I got the Digital Calipers last week.
@NKlamerus said:
Can you import files? There's a Leatherman Fuse Plastic Model on Etsy that I've always wanted to print somewhere but never have.As soon as I get a printer I will make it available to any MTO members that want to print things.
Def
-
@hiraethus said:
Nice looking models.
I've always found sketchup a real PITA to work with so I admire your patience.One of the best ways I've found to familiarise myself with new CAD software is to take a part and some digital calipers and try to replicate exactly what I'm holding in my hand. That way you'll get a feel for both the software and how the part is made.
Amen to that, on both counts. Replicating things is good and Sketchup is rather difficult to work with (in my experience at least). Can't wait to see all the crazy stuff you come up with boss!!!
-
So what do you guys suggest other than Sketchup? I'm using it largely because the price (free) is right but if there are better options out there I'd certainly consider them, if not now then for sure later on.
Def
-
Fusion 360: http://www.autodesk.com/products/fusion-360/try-buy
Proper 3D CAD software, free as long as you 'renew' after a year. You'll need to be online to use it as all the processing is done on AutoCAD's servers, but that means you don't need a high end PC (or a PC at all for that matter - it'll run on a mac too) to run it.
-
Good, because my poor old laptop is seriously running out of steam. I've heard other people mention Fusion 360 as well, so I guess maybe I should listen and give it a shot....
This morning's attempt at a design is a tripod mount for a GoPro camera.
Def

-
It has taken almost a day and a half, but I think I have a good handle on a 3D logo some of you may recognize. :D
Def

-
I hadn't realized just how complex Travis had made the logo- I need to adjust my model a fair bit to make it accurate, but I have a good start I think. I had never realized that Travis had all lined up all the rivets on all of the letters, or how complex the plier head really was. Here is the logo before I removed the guidelines.
I have spent almost two days poring over a printed, simplified version of the logo with calipers and I still managed to screw a few things up, but now that all of the letters are there I can fiddle with things a bit more until they are right.
For those keeping track of the technical data, if this logo was printed at it's current scale, the plier head would be 515mm tall, the length would be about 2215mm and it would be 5mm deep to the surface of the letters and 6mm deep at the top of the rivets.
So, in short, bigger than any commercially available printer could handle, but I needed it that big to do the detail in the plier head.
Def

-
@hiraethus said:
Fusion 360: http://www.autodesk.com/products/fusion-360/try-buyProper 3D CAD software, free as long as you 'renew' after a year. You'll need to be online to use it as all the processing is done on AutoCAD's servers, but that means you don't need a high end PC (or a PC at all for that matter - it'll run on a mac too) to run it.
Ya its pretty sweet and quickly becoming the de facto small business CAD solution. The beauty is it's also CAM software. A CAD/CAM package for free is nuts, and for $300 for a business use is unheard of.
-
Still using Sketchup- haven't switched to Fusion yet, and this is today's result.
I seem to be having an issue working on curved surfaces so I really had to struggle to add a stem until I said to hell with it and added a flat inside and out and built the stem on that.
I added a recessed plane on the inside top for the crystal to sit in and a raised lip on the outside for the top outside for a bezel. Not pictured is the underside where I put on a raised lip for the case back with a recessed spot for an O ring for waterproofing. Again, I can't figure out how to work on curved surfaces, so I was unable to thread the lip for the case back.
Still, not bad for my first try. I think my next watch will be a square watch with a recessed, screw in back like my Pebble or other digital type watches.
Squares I can deal with easily enough.... :D
Def

-
Yup, I definitely prefer straight lines and squares....
This is a rough approximation of my Pebble watch case.
Def


-
I decided to go back and fiddle a little more with the GoPro mount I did and see if I could reduce the amount of material and weight while maintaining strength. I used the triangle type cutouts that I used on the bracket above on one side and did a circular vent type cutout on the other. It looks pretty cool on the drawings, but I'm not sure how well it would translate in an actual product when you consider the unit would really be all of an inch and a half or so high.
Still, this is mostly theoretical and experimental at this point, so I can do whatever I want without having to think about reality!
Def


-
Wait...what!? Broken leg! Damn that sucks Def. Hope you heal up soon.
That's us mobile
-
I'm on the mend pretty good now. I can walk (awkwardly) for short distances completely unaided now, and I'm improving every day. You can see all the sordid details in this thread:
/topic/64110
The short version is that it's been almost two months now, had two screws installed in my ankle and I've been passing the time largely with Netflix, 3D design and a number of random frustrations. :D
Def
-
While triangles are strong structures, the direction does matter. Also the circle one might look neat, it's probably not as strong as a triangle setup would be IMHO.
-
Probably not, but as the circular portions are roughly .5mm thick I doubt I would ever even try to print it this way. As I said, I was mostly just fiddling around.
Besides, it doesn't really require that much strength to hold a GoPro anyway, even the bigger, older Hero2's that I have. :D
Def
-
Today's project was pretty simple, even by my standards.
I use 1" square aluminum tubing as a cross bar for carrying my kayaks on my trailer. You can see them in the above photo- they are the silver bars. These are also my old ones where I had cut off the ends. I have replaced these with new ones where the ends weren't angled because this served to weaken them too much. The ends of the new set have been left raw, which is not a big deal, but I always thought that end caps would be nice. This is the kind of thing I was looking for:

Not an exciting design I know, but it was a little interesting since I added a taper to the part that gets inserted. Of course the aluminum crossbars aren't on the trailer now, and since my mobility is still somewhat limited I don't have exact measurements available so this will need some tweaking when the time comes.
On a side note, to me, these are the reasons why 3D printers are going to become common in the near future, as well as 3D scanners. We have all experienced some broken clip or fitting for some doodad or another and had no way to obtain another one. Usually the only option is to call the company and sit on hold for an hour, only to try to describe the part to someone in a call center that has never seen the device you are talking about. Then, after paying for it, you wait three weeks for it to arrive, only to find out that it's the wrong piece. I think about this a lot, specifically with regards to my parents' situation, since they live in a small town, 100 miles from the closest city. If a small part breaks, it's a long trip to make to try to find a replacement, even if it is readily available. Being able to piece the part together, scan it (or copy it manually) and have it printed out would make a world of difference for them. That is a large part of why I'm so interested in this stuff.
Def

-
I am sick of all the one piece tools on the market that are the result of people just ramming as much crap into a steel bar and trying to get rich off it, so I decided to see how difficult it is.
Here is the result of maybe an hour's worth of work, from someone who barely understands the software. Ladies and gentlemen, I give you the DefTool! :P
Def

-
Does it really need more functions than a bottle opener? :p
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
