H1
-
The yellow one from post #15 is now red.
-
Big, BIG fan of H1 here...got quite a collection quest going on since I discovered it...




Greatest steel for food prep and dirty stuff


I love, LOVE how tough it is, bending instead of chipping


Friggin' easy to get scary sharp and maintain.


-
Great H1's P!
-
seems like they've seen an astonishing amount of work
-
Not astonishing, but I appreciate them for what they are...working tools!


And they perform excellently on hard environments.

Since I discovered it, H1 is my go-to for demanding jobs.


It's so great for these dirty, rough tasks.

-
@ThePeacent said:
Not astonishing, but I appreciate them for what they are...working tools!

And they perform excellently on hard environments.

Since I discovered it, H1 is my go-to for demanding jobs.


It's so great for these dirty, rough tasks.

Cool pics[emoji106]
-
This is the only one I have so far

Sent from my iPhone using Tapatalk
-
-
-
Looking good.

-
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
-
@harronek said:
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
I completely disagree, but that's alright. We don't all have to always agree. My cutting needs may differ from yours making our experiences with it different.

-
@captain spaulding said:
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
I completely disagree, but that's alright. We don't all have to always agree. My cutting needs may differ from yours making our experiences with it different.

I suppose I should have said that all I use and carry now is ZDP189 or M4 , my VG10 Damascus bladed Delica is the only exception and even that is miles ahead of the H1 in retaining an edge , maybe it was just my knife , but it dulled off very quickly and it was only the fact that it was a SE blade that keep it in a still vaguely usable state . I seriously think if it had been a plain edge I would have given it away and bought another cheap knife while on the trip .
Like I said in the first post , I fully understand if others have differing needs and if H1 fills those requirements , good stuff .Ken
-
Rumor is H1's edge holding requires a break in of sorts (multiple sharpenings). The serrated version apparently has great edge holding ability vs the plain edge.
-
@captain spaulding said:
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
I completely disagree, but that's alright. We don't all have to always agree. My cutting needs may differ from yours making our experiences with it different.

+1 I've only got a ladybug in h1 but I love that steel. But yeah we all have different needs
Sent from my iPhone using Tapatalk
-
@harronek said:
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
Well, I actually love the fact I can sharpen my Salt on a curb, or my coffee mug every morning. Gets scary sharp easily, and I also like how it bends and deforms instead of chipping, as I tend to pry and apply lateral forces with my knives more often than I should...

Of course everyone's cutting needs are different!
-
I carried a Salt 1 SE exclusively for about 5 weeks over the Christmas period .
I went overseas and needed a do it all single bladed knife that would handle salt water conditions .
On the second to last day before coming home I lost it after leaving it on a picnic table and it was gone 10 minutes later when I came back for it .
I didn't shed one single tear for that knife . It wasn't that I was happy it was gone , but I sure wasn't going to miss it either .
I realize now that my particular cutting needs and requirements are fully meet with a plain edged blade and that most modern steels will handle mild exposure to corrosive conditions with basic care and maintenance , using H1 steel is like stepping back 20 years in its edge holding abilities and general " feel "etc when sharpening and using .
I love my Spyderco's , and I'm sure like a large number of members here I bore everyone that will listen with tales of Spyderco's greatness .
I fully understand that other people have different knife requirements from me and its great Spyderco caters for everyone .
In summary , I tried it , didn't like it , don't need it ,wont buy it again .Ken
Well, I actually love the fact I can sharpen my Salt on a curb, or my coffee mug every morning. Gets scary sharp easily, and I also like how it bends and deforms instead of chipping, as I tend to pry and apply lateral forces with my knives more often than I should...

Of course everyone's cutting needs are different!
Dang! How fine are your curbs?

-
This is Captain approved.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



