The Zippo Owners Club
-
Is anyone else into the "Fixxit" promotional tools ?
I like the ones made by Case for Zippo (slide out knife blade and screwdrivers), and they came with quite a variety of advertising labels (including several different "Zippo" ones). I believe they were designed by Blackie Collins.
http://www.angelfire.com/ny5/margaret/zippo_other/index.album/zippo-fixxit-cbs?i=2
http://lenhartauction.hibid.com/lot/43468-18721-16646/zippo-fixxit-pocket-toolbox-w--box/
-
-
The nice thing about using a white gas stove is that you can use it in your Zippo. Since it is a lighter distillation, I've found that a fill will evaporate a day or so sooner than Lighter fluid. No big deal though...start out with a fill of Lighter fluid and top off with white gas if needed.
I've modded some of my user Zippos to loss-proofs. The two plain ones at top left are factory models and the rest have bails made from piano wire. Another advantage is that the hinge pins no longer slip out.
I also use the Thunderbird soft flame inserts with spark wheels...don't like piezo ignition because I've had so many failures with them.


-
I think that a lot more people would carry a zippo if the knew all the posibilities that a zippo can offer.
Most people just see it as a stinking lighter that has to be refilled every week. I see it more as a campfire in a metal (brass :D ) box. No other lighter can compete with it.Throw away butane lighter: poor quality, not refilable and when it is refileble i am dependent on gas can which will run out any time soon. Also the flint will wear out.
Windproof butane burner lighter: Piezo electric ignition rules out the flints but i also see it as a week spot because i cant repair it. It also depends on butane gas and when that gas runs out the lighter is useless.
Firesteel: is great when i combination with cotton balls or some kind of tinder but without cotton balls it is only good for lighting a gas stove.
Zippo: it lasts a life time, costs 5 euros used, also runs on flints from throw away lighters and best of all runs on every liquid that is ignited by a spark. On a full car fuel tank a zippo will light a lifetime. You can also ignite it with a firesteel.
With a zippo i am basicaly independent on stuf that i can't produce by my self.
Because i have a little bit of a prep mind set i like products where i am not dependent on other manufcaturers etc...I really like that i can put it on a table and that it keeps burning, this is especially handy to use it as a candle to light a room or the use it as a starting flame to light acetylene torches.
It works great outside because it is windproof and is really handy in starting cam fires or warming up your hands.
I also used it to unfreeze frozen locks in the winter, used it to heat up a spark plug so the moped would start again and a dozen of other uses.I have the zippo fuel can (which i refilled with cleaning fuel) besides my bed and every friday before i get out of bed i refil my zippo, it only takes 15 seconds to do so.
You can also put an old bycelcle inner tube and cut it about an inch wide and put it around the zippo case where the hinge is. This should slow the evapouration proces and also make it water proof.I hope this gets more people in to carrying a zippo, because for the (second hand) price you cant go wrong with a tool that will outlast you.

-
Another good Zippo resource,
http://www.glenzippo.co.uk/index.htm -
Great posts, this threads on fire

@Spork, Lord of Lime Jello! said:
I've modded some of my user Zippos to loss-proofs. The two plain ones at top left are factory models and the rest have bails made from piano wire. Another advantage is that the hinge pins no longer slip out.
Hi Spork,
Nice!
I guess you 'just' replace the hinge pin with wire?
-
Yes, that's correct Sparky...but the wire has to be close to the same diameter of the pin...otherwise you get floppy hinge.
I found a small binder clip that worked for a knockoff lighter but for the Zippos I bent the loops from piano wire...copying the shape of a factory Loss-Proof


-
Thank you Spork

-
@Sparky415 said:
8)Thank you Spork


-
@Spork, Lord of Lime Jello! said:
Yes, that's correct Sparky...but the wire has to be close to the same diameter of the pin...otherwise you get floppy hinge.I found a small binder clip that worked for a knockoff lighter but for the Zippos I bent the loops from piano wire...copying the shape of a factory Loss-Proof
My hinge was replaced somewhere around 2000 2001. I might try to put in a larger pin it it because the brass hinges have probably worn out a bit.
It isn't that wobbly but aint that tight either.
My current pin is made from a small nail that i cut to the right length. -
One of my Zippos. This one has a leaping Bass engraved on it and was my first Zippo. I run it with a butane torch insert.
-
Here is my first zippo: (and today's arrival btw)

-
@m47mu74nt said:
Here is my first zippo: (and today's arrival btw)Do you plan on carrying that beauty or just for collecting purposes?
-
Here is my first zippo: (and today's arrival btw)
Do you plan on carrying that beauty or just for collecting purposes?
I'll keep it in pristine condition, "new in box" -shame on me, right?-
My Spanish Bic would be extremely disappointed if i left it for a zippo btw
-which as a non-smoker is in my EDC for ages-
-
Here is my first zippo: (and today's arrival btw)
Do you plan on carrying that beauty or just for collecting purposes?
I'll keep it in pristine condition, "new in box" -shame on me, right?-
My Spanish Bic would be extremely disappointed if i left it for a zippo btw
-which as a non-smoker is in my EDC for ages-Of course you should keep it in pristine condition. If you ever want to edc a zippo just buy a second hand beater for 5 euros. Most of them are as new because people have never used them.
Today i replaced the pin in my zippo's hinge with a 0.3mm larger diameter brass nail that i cut to the right lenght.
Now the hinge is much less wobbly then it used to be. This is probably the last oversized pin that i can use before the hinge has to be replaced by zippo. That will be the second time the hinge will be replaced. The previous time was with the previous owner in 2001.But that will probably will take antother year or two.
I don't know why the hinge was replaced in 2001. But the zippo was build in 1990 and has always been edc carried. concluding from that is that with a couple of hinge pin replacements and squeezing the brass higne with pliers the average hinge will last between the 10 and 20 years depending on if you play with it a lot.

-
Neat job

-
Picked up some supplies for my possibly (fake) Zippo.

-
Got a sheath for it too. I added a ranger band to "test" how long the fuel will last. One thing for sure is the seal the ranger band created is great. The vapor seems to stay within the lighter because when I go to spark it, poof the vapor ignites. I think this is a good sign the ranger band is keeping the fuel from escaping via vapor
. Did I say that right?
-
@Aloha007 said:
Got a sheath for it too. I added a ranger band to "test" how long the fuel will last. One thing for sure is the seal the ranger band created is great. The vapor seems to stay within the lighter because when I go to spark it, poof the vapor ignites. I think this is a good sign the ranger band is keeping the fuel from escaping via vapor
. Did I say that right?Keep us posted on how long it lasts with and without the ranger band.
I found it didn't add a lot of life to my fuel, but maybe I didn't have a narrow enough piece of inner tube...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
