SAKs & Coffee
-
[quote author=SAK Guy link=topic=61684.msg1236960#msg1236960 date=1457279246]

EZ-Open Solo? Did you do that mod yourself?
Oh heck no, Syph did it! I don't own real power tools for a reason... :DTexas chainsaw massacre?

That part of my life is behind me......


[/quote]Oh yeah we believe you... :D
-
I'm not carrying them due to the March Wave challenge, but here are both the black and red huntsmans together, and staying far from the precarious edge.

-
Good morning Gentlemen.
The CT41 and his steelness mate are doing some balancing this morning
Cant' wait to see the Gamblers Walk :ahhh :ahhh :ahhh

-
This thread is getting crazy dangerous! Great pic Storky
There's some peril going on there. This is a nice build up to........THE WALK -
Blah, blah, Farmer, blah blah (insert witty remark) blah.....(insert appropriate smiley)
(it's one of those days)

-
-
The Walk: Part Two
It's the day of the Big Event, when the daredevil Rambler throws all caution to the wind and prepares to cross the chasm above a large mug of roiling hot coffee on a high wire spanning two carafes. All the Big Guns have gathered to witness his daring do, and to watch him scoff at the dangers: the Work Champ, Champion, Craftsman, Cyber Tool 34, and the EvoGrip S557. The Rescue Tool is there, as required for stunts of this nature. It is windy today and all are concerned about the effect it might have, but the Rambler insists on going ahead.

Suddenly, to the horror of all assembled, just as the Rambler sets foot to begin the crossing, there's a loud crack, the high wire snaps and recoils, nearly ejecting the Rambler, who manages to barely grasp where it was anchored to the carafe, and is now dangling precipitously above the chasm.

The Rescue Tool leaps into action, quickly deploying its blades to help lower the imperiled Rambler to safety.

A Scientist is called in to examine the break and perform an analysis on the structural failure

The high wire rigger claims that the high winds from a ceiling fan were beyond the design parameters of his high wire. He is promptly sacked for attempting to deflect responsibility and accountability for failing to provide a high wire of sufficient tensile strength.

We then do what all sane, rational and civilized folk would do. We put some water on to boil . . .

and made tea . . .

to contemplate what we will do to redesign the high wire cable so that it can withstand the tensile stress with sufficient safety margin

What? You expected the adventure to be over so quickly? With no high drama?
:DJohn
-
Well I'm not going to be able to sleep tonight...............
-
And people say Ive got too much time on my hands

-
I start therapy next week.....
-
-
Part Three of The Walk may not be today, gentlemen, as a crisis has arisen . . .
I awakened this morning to find my coffee maker is leaking water. It's a Bunn that keeps a reservoir filled with water at 200F (about 93C). When you pour water into the top, it uses gravity to force the water out of the heated reservoir into the drip basket and replaces it with the cold water that was just added. Makes a full pot of hot coffee in about 3 minutes. I had spotted a puddle of water alongside the coffee maker two days ago and thought to myself that I was clumsy for dripping water down the side while filling it. Found another puddle yesterday and thought to myself I'm becoming a clumsy oaf in my old age. Found yet a third one this morning after ensuring yesterday there was no puddle after making coffee and knew there was a leak. After moving the coffee maker I found another one on the other side near the edge.

So . . . I did what any other sane, rational and civilized man would do, I put some water on to boil . . .

and made tea (lived in Europe several years and learned to do this during major crises) . . .

To contemplate what my next move would be after unplugging the coffee maker as no coffee is a real crisis of epic proportion. A search of Amazon showed a new one would be about $95 :o and I'd have to wait two days for it with Amazon Prime
Seeing as how I'm doing the STACK challenge, what better opportunity to put the Cyber Tool 34 to work. Google revealed the problem is not an uncommon one and there is a fix that isn't very difficult, but requires time to disassemble the coffee maker, perform some significant lime de-scaling to remove deposits that don't get cleaned out with routine maintenance, and repair, refurbish or restore a gasket. I'm not going more than a half-day without the java!That's what's occupying my time this morning, and it's being documented for the STACK challenge, a truncated version of which will appear here later today. Obviously, without any roiling hot coffee, the Rambler cannot go on with the show.
John
-
I'm not doubting your technical prowess Jalind, but does your Rambler have a sensitive bladder that might equate to the puddles found near the stunt site? I know I feel quite nervous myself before performing anything death defying. Just thought I'd mention it to maybe save you some time.
Perhaps we have put too much pressure on your poor Rambler's bladder.
-
@magentus said:
I'm not doubting your technical prowess Jalind, but does your Rambler have a sensitive bladder that might equate to the puddles found near the stunt site? I know I feel quite nervous myself before performing anything death defying. Just thought I'd mention it to maybe save you some time.Perhaps we have put too much pressure on your poor Rambler's bladder.

-
@magentus said:
I'm not doubting your technical prowess Jalind, but does your Rambler have a sensitive bladder that might equate to the puddles found near the stunt site? I know I feel quite nervous myself before performing anything death defying. Just thought I'd mention it to maybe save you some time.Perhaps we have put too much pressure on your poor Rambler's bladder.
Interesting thought. Found the towel used to mop it up. Fluid is quite clear in color and does not have any ammonia odor.
I've got the coffee maker partially disassembled and determined the failure mechanism. It is exactly the common problem my Google search had found (seepage around a gasket from lime scaling and age). Found one other issue in the process, and some critical parts are soaking in white vinegar for a while to aid in their de-scaling. It's a simple design using gravity and heating elements to keep the water hot, and to keep the pot hot (both are switched), without any percolation or reliance on steam generation to push the water into the filter basket. Disassembly of the top to get to everything needing work was also easy. De-scaling the upper chamber (akin to chipping paint) and refurbishing two gaskets with their related bits are taking some time.
In fairness to Bunn, the coffee maker is over five years old and the water here is hard with lime. The routine de-scaling maintenance Bunn recommends has kept other parts sufficiently de-scaled, but cleaning out what I have been this morning requires disassembly and it's something that periodic vinegar flushing isn't going to prevent.
John
-
so what SAKs did you use for the task ?

-
@eamo said:
so what SAKs did you use for the task ?
Used the Cyber Tool 34 (as I'm doing the STACK Challenge) -- these are just a few of the pix
The Culprit: this gasket between the lower reservoir that keeps water at 200F (93C) for the next pot of coffee and the upper, temporary reservoir into which you pour water when making the next pot. Gravity pushes the hot water in this tank through a tube at the bottom up into the filter bowl. You can see stains around it where water had seeped out. It then flowed out over the side of the reservoir and out the bottom of the coffee maker. The seepage is why there was always a small puddle.

Driving the last screw into the top during reassembly . . .

The "Smoke Test" making the first pot after reassembly. If none of the pressurized smoke that makes all things electrical run leaks out, it's successful. And I'll bet you thought it ran on electrons. The proof it runs on pressurized smoke? Whenever it leaks out, electrical and electronic devices quit working. That's my story and I'm sticking to it. This first pot after reassembly was done in right at about 3 minutes flat, the fastest I'd gotten a pot of coffee from this machine in several years!

Cyber Tool 34 sampling the fruits of his labors

The upper reservoir was only about 99% de-scaled, but two gaskets and a short tube were completely cleaned, and that will have to suffice for now. I was getting desperate for the java. I'll be watching for more seepage and if there is any I know where to add an O-ring onto that gasket to completely seal it up.
John
-
job well done - how did the coffee taste ?
-
so what SAKs did you use for the task ?

Used the Cyber Tool 34 (as I'm doing the STACK Challenge) -- these are just a few of the pix
The Culprit: this gasket between the lower reservoir that keeps water at 200F (93C) for the next pot of coffee and the upper, temporary reservoir into which you pour water when making the next pot. Gravity pushes the hot water in this tank through a tube at the bottom up into the filter bowl. You can see stains around it where water had seeped out. It then flowed out over the side of the reservoir and out the bottom of the coffee maker. The seepage is why there was always a small puddle.

Driving the last screw into the top during reassembly . . .

The "Smoke Test" making the first pot after reassembly. If none of the pressurized smoke that makes all things electrical run leaks out, it's successful. And I'll bet you thought it ran on electrons. The proof it runs on pressurized smoke? Whenever it leaks out, electrical and electronic devices quit working. That's my story and I'm sticking to it. This first pot after reassembly was done in right at about 3 minutes flat, the fastest I'd gotten a pot of coffee from this machine in several years!

Cyber Tool 34 sampling the fruits of his labors

The upper reservoir was only about 99% de-scaled, but two gaskets and a short tube were completely cleaned, and that will have to suffice for now. I was getting desperate for the java. I'll be watching for more seepage and if there is any I know where to add an Onion-ring onto that gasket to completely seal it up.
John
Fixed. When is THE WALK?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
