EDC Experiments
-
The bit driver for the Blast, Rebar etc. will also work good on the inline philips of a sak too! Very handy!
Wait, you mean a SAK Spirit or Swisstool. I was picturing a knife with it connected.
No, he means the inline driver on an Explorer or Yeoman. It works very well actually.
Yes, those ones and the Swisschamp, Spartan Lite, etc., any of them with an inline philips. I haven't check it on a Spirit or Swisstool but can't imagine it not working on them too!
-
@jerseydevil said:
A Scientist and a Yeoman? Showoff. :PI don't have them. I just found a pic online.
-
Looks like the newer LM Pockettool Piranha 2 and #4 have a spot for a LM bits that will fit a bit driver extender. That means I can carry LM bits and use one of those for a wrench in place of the crescent or the bit driver plus square-shank knife Phillips. Great to have another option!
-
Wengers will work too.
-
I'll just leave this here... Knipex Plier Wrenches on Sale.
-
@zoidberg said:
I'll just leave this here... Knipex Plier Wrenches on Sale.Oh yah, I saw that on that other thread. Good show!
-
I wish Leatherman made a basic bit driver for their bits. I guess any bit driver will work with the bit driver extender.

-
Tom, do you ever require the use of a wire cutter?
When I belt carry a Cobra pliers and Leatherman pre-Crater knife/driver instead of a pliers multitool, I have no good way to cut wire. If I add a diagonal cutters to the mix, the load of tools becomes uncomfortable for belt or pocket carry.
I daydreamed about a small set of hinged wire cutting blades that would fit inside the Cobra pliers' jaws and could be compressed to cut wire. But, there's no such animal.
-
I actually don't except when I need to change guitar strings, and I carry a wire cutter in my guitar case. I guess I'd just bent the wire back and forth to break it.
-
Maybe a really small quality cutter would do.
-
That sounds good if the edge holds up.
-
Or just carry a really small pliers too like a PS4.
-
I went looking for detachable wire cutter jaws or a folding wire cutter, but I didn't come up with anything.
-
Would a pair of electrician scissors work to cover wire cutting needs?
I have considered going with the Crater + bit kit/plier wrench carry combo but I think I would miss wire cutters also.
-
So we just need Knipex to build in a wire cutter into the Cobra.
-
Maybe we could put a couple of those replaceable wire cutter blades on a Cobra? It would have to be on the same side. Or maybe it could be put on just one side that opposed the jaw as an anvil cutter.
-
I'd rather just carry a small dedicated cutter or PS4 in a pocket.
-
Or go back to what I've done the past 8 years - pocket carry a Skeletool for the blade, bit driver, wire cutter and pliers, and then carry a Cobra or Plierench and LM bits in a sheath or bag.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login