What did you use your Sak on today?
-
I used the wonderful Wenger scissors on my Handyman to cut open my packet of coffee and to cut some paper at work last night.
-
I made a few more rock throwing slings using only my swiss army knife, two tools, the knife blade and awl/reamer.
Its a simple project to do and fun toy to play with.
Give one a try.
-
Used the small screwdriver / can opener on my Super Tinker to reinstall the license plates on our pickup, so we could drive it home from the garage. It had previously gotten a lift to the shop since it had a broken front wheel bearing/knuckle. (F-i-L drove thru a stop sign and got hit hard on the front passenger quarter. Now to take it to a body shop, to look pretty again.)
Sent from my SM-N910T using Tapatalk
-
@Todd Prosky said:
I made a few more rock throwing slings using only my swiss army knife, two tools, the knife blade and awl/reamer.
Its a simple project to do and fun toy to play with.
Give one a try.They look fun. I can see myself slinging the rock in an unintended direction
. I was surprised how far that rock went in the video. -
Here's my original I made a few months back. It's amazing how much zing you can get out of a rock. I was inspired by a MacGyver Season 1 episode, To be a Man, which showed him using one to knock a rider off of a horse in 1980s Afghanistan. My son has one too, and they are a blast! Now if I could just hit something with it.....
::) -
Cut my SIM card.

Sent from my SM-J500G using Tapatalk
-
Today I decided that the Mexican Oregano I planted two summers ago in a tiny pot deserved a larger pot. But first I needed to make some drainage holes...

Climber to the rescue!
Awlsome! -
Cleaning my lads boots

Sent from my iPhone using Tapatalk
-
I used the corkscrew to undo a knot in my son's shoe laces. I can't think of a better tool to do it with!
-
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
* Have used an analog multimeter? * Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)? * Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred? * Have used an analog meter with a mirrored scale? * Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOM -
You mean like this?
-
@jalind said:
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
Yes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
- Have used an analog multimeter?
- Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?
- Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?
- Have used an analog meter with a mirrored scale?
- Know what a mirrored scale is for and how to use it?
Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOM -
@sLaughterMed said:
Today I decided that the Mexican Oregano I planted two summers ago in a tiny pot deserved a larger pot. But first I needed to make some drainage holes...Mexican Oregano you say....... Sounds suspicious.

-
@captain spaulding said:
Today I decided that the Mexican Oregano I planted two summers ago in a tiny pot deserved a larger pot. But first I needed to make some drainage holes...
Mexican Oregano you say....... Sounds suspicious.

No worries Cap, sLaughterMed lives down on Copperhead Road.....
-
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.
OK . . . show of hands now . . . how many:
* Have used an analog multimeter?* Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?* Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?* Have used an analog meter with a mirrored scale?* Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMYes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
Can you do dual precision calculations using a slide rule to get twice the number of significant digits as its tick mark precision allows? IOW, can you get six significant digits in the computation if the slide rule marks are only good to three significant digits. It does require a scratch pad and pen or pencil for intermediate results. Clue: the algorithm in a programming language math library (i.e. Fortran, C, Pascal, etc.) for dual precision calculations is exactly the same as was used with a slide rule!
John
[who is REALLY showing his age now] -
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.
OK . . . show of hands now . . . how many:
* Have used an analog multimeter?* Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?* Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?* Have used an analog meter with a mirrored scale?* Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMYes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
Can you do dual precision calculations using a slide rule to get twice the number of significant digits as its tick mark precision allows? IOW, can you get six significant digits in the computation if the slide rule marks are only good to three significant digits. It does require a scratch pad and pen or pencil for intermediate results. Clue: the algorithm in a programming language math library (i.e. Fortran, C, Pascal, etc.) for dual precision calculations is exactly the same as was used with a slide rule!
John
[who is REALLY showing his age now]Prostrated and bowing head down with hands in front of me.
-
Used the Philips on my rambler to open the battery compartment on my lads new toy car
Sent from my iPhone using Tapatalk
-
@jalind said:
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
- Have used an analog multimeter?
- Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?
- Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?
- Have used an analog meter with a mirrored scale?
- Know what a mirrored scale is for and how to use it?
Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMMy old Sperry from the 70's, mostly used to check continuity, still works fine.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login