And so it begins.... (My adventures into Alox!)
-
Syph, Was wondering when you are going to offer a solid brass cyber bit-holder and mini flashlight component ;)
Seriously though: great work. I love this thread. -
@neillcurrie said:
Syph, Was wondering when you are going to offer a solid brass cyber bit-holder and mini flashlight component ;)
Seriously though: great work. I love this thread.Ive only come accross 2 people who used the flashlight module in my years of modding, so I probably wont tackle that one. :D The bit holder for sure. I dont know if it should be brass or nickel silver, or maybe Ti would be best. Ti could work actually since its not a backspring tool, it just free rotates. Hmm Ti that thick would be pricey... but then it could be anodized too... hmmm Well we'll see. Im still patiently waiting for the Tormach to make its way to Canada and then learn how to use it, but for sure I can see making up some custom parts to get a SAK up to its max blingy potential. :D
-
@Syph007 said:
Maybe I could add backpack straps as back layer tools?I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale.
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

-
Maybe I could add backpack straps as back layer tools?
I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

**I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale. **
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

Yes for sure on a 3 layer SAK with Ti scales and steel pivots the liners dont bear that much of the load of spring resistance.
It wouldn't be cost effective to have them waterjet like that, but if I start machining them, I can just drill a bunch of holes as the final step in places you wouldn't be able to see. Could be a fun project to see if I can get a Ti/brass super tinker equal in weight or lighter than a stock one. :D
-
Maybe I could add backpack straps as back layer tools?
I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

**I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale. **
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

Yes for sure on a 3 layer SAK with Ti scales and steel pivots the liners dont bear that much of the load of spring resistance.
It wouldn't be cost effective to have them waterjet like that, but if I start machining them, I can just drill a bunch of holes as the final step in places you wouldn't be able to see. Could be a fun project to see if I can get a Ti/brass super tinker equal in weight or lighter than a stock one. :D
If anyone can do it, you can Syph.
-
This one is just 2 layers shy of a swiss champ. :D





-
What does it weigh in at? Looks hefty.
-
@Toolslinger said:
What does it weigh in at? Looks hefty.I think the weight is around.... to cool to matter. :D
-
@captain spaulding said:
What does it weigh in at? Looks hefty.
I think the weight is around.... to cool to matter. :D
If you have to ask how heavy it is, your pocket isn't big enough. :D
-
@captain spaulding said:
What does it weigh in at? Looks hefty.
I think the weight is around.... to cool to matter. :D
If you have to ask how heavy it is, your pocket isn't big enough. :D
Oh a little more than a classic...

Hmm i dont know what a swiss champ weighs but I bet this is close... sec I will go weigh it.
Im back... 170 grams.
-
(Rhetoric?, slightly tongue in cheek?) Question for you Syph - (and forum buddies)
Are you creating multitools? ......... Or ......... Works of Art - and Objects of Desire ??? :o ;)
Edit: PS. Just weighed my SC -184g - So still well under
-
I wont speak for Syph, but if I were ever to get one of his custom tools, I would use it all the time. I dont see much value in getting a tool to display, I like to use my tools. Most of my tools are ugly smurfers now anyhow, as I cant seem to stop meddling with them
-
My TiRogueneer weighs in at 6.3oz, or approximately 178 grams. It's 6 layers as well, but has pliers and fish scaler instead of the wood saw and mag/phillips layer.
Sent from my SM-G920R4 using Tapatalk
-
Once I get the CNC mill going I'll for sure make a pocketed version to lighten up the scales. I think a 3 layer is about perfect though for me, so Im still happy with a Ti converted super tinker. :D
-
Any pics of a Ti Climber?
Sent from my XT1563 using Tapatalk
-
Almost!! :)
/topic/64990
-
@captain spaulding said:
What does it weigh in at? Looks hefty.
I think the weight is around.... to cool to matter. :D
This.
-
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scales
-
@OHIO said:
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scalesI just use cheap ones. I used to buy the 15 dolar ones but breaking those is much more sad then 2 dollar ones.
Tapping Ti is easy if you make the right size hole. You use a much larger one than in aluminium. Basically measure the OD of the tap and then subtract 0.005 to 0.010 and that is plenty of thread in Ti. Also you have to start and backnit off alot. Once you are putting alot of torque on that tap it will snap. Tapered taps are a must too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login