Leatherman PST chronology project
-
@Smitty44 said:
The new info in Reply 81,looks good to me Bob,and thanks for all your wisdom and work on this subject that really started the multi era.
Thanks Chief, but I consider it was a team effort!

@Benner said:
Sorry it's late, but here is my input.The riveted PST obviously has no date mark, but the other was made in Dec 2000.
Here's some comparison pics for you. :)
Great comparison pics Ben. :)
So referring to Reply 81, do you see your riveted tool to be a category #5 and your newer tool to be a category #11 ?
-
If it helps any Bob my July 94 PST is only stamped on 1 side (not both) as per the question mark in cat 9 :) this may get you a little closer in pinpointing that as well ;)
Man that is a great timeline for the little ole PST great work there organizing it
It is sure to help identify many a PST in the future

-
@J-sews said:
....(Note some Japan tools appear to have handles obtained from the same source as some USA tools)........(Note Japan tools appear to have several of their blades obtained from the same source as USA tools)....
Could these simply be warranty repairs? I.e. they were made in Japan, but were repaired in Portland?
Difficult isn't it?
-
....(Note some Japan tools appear to have handles obtained from the same source as some USA tools)....
....(Note Japan tools appear to have several of their blades obtained from the same source as USA tools)....
Could these simply be warranty repairs? I.e. they were made in Japan, but were repaired in Portland?
Hmmm, could be, but I don't think so. Check out the two below for instance. Top one is riveted, made in Japan. Bottom one is knurl screwed, made in USA. Look closely. The handles and plier heads came from distinctly different stamping and casting dies. Not surprising.


Now look at the blades and drivers. The weird left-hand can opener, all the screwdrivers, and the knife blade are identical, right down to the grind marks. And it seems as if all the early PST's are this way, whether they are made in Japan or made in USA. So thats why I suggest these blades and tools came from the same source. :-\
-
Yeah I see what you mean..
We need to know form Tim. Did Portland ship some parts to the place in Japan. Or did they send dies? Or was some assembly of Japanese parts done in Portland?
Or something else?
-
??? That's why I thought originally that they were all at least put together in Portland
still after an in depth answer from Tim LM and there are still alot of questions :( Well back on the case :D so to speak ::) -
....updated the very first post with the latest version of the timeline....
-
Thanks for the update Bob,looks real good,I was going to mod my Cabelas PST,and my PSTII by putting the the drop point blade and milled awl on the PSTII,but I think I'll hold off now,and keep it original.

-
@Smitty44 said:
Thanks for the update Bob,looks real good,I was going to mod my Cabelas PST,and my PSTII by putting the the drop point blade and milled awl on the PSTII,but I think I'll hold off now,and keep it original.
Eeeek! :o Don't you dare mod that old PST chief! Sell it to me first, I'll get you a different one to mod!
:D -
@Smitty44 said:
Thanks for the update Bob,looks real good,I was going to mod my Cabelas PST,and my PSTII by putting the the drop point blade and milled awl on the PSTII,but I think I'll hold off now,and keep it original.
Smitty you could of been the first member banned for desecrating a holy relic :P :D :D :D
-
#1 Rivets or knurled screws? - rivets
• Lanyard attachment? - yes
• (Old) small diameter or (new) large diameter plier pivot? - OLD small diameter
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? - with USA
• A hard wire cutter notch? - no
• Handles stamped with what? LEATHERMAN TOOL PORTLAND OR. on opposite faces of handles
• Date codes? - 01/99
• Drop point knife blade or clip point? (saber?) - shorter clipped area
• Knife blade tang stamped - LEATHERMAN alone? Or with USA? Or JAPAN? = USA
• Screwdrivers: pivot-in or pivot-out? don't understand#2. Rivets or knurled screws? - rivets
• Lanyard attachment? - yes
• (Old) small diameter or (new) large diameter plier pivot? OLD smaller diameter
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? USA
• A hard wire cutter notch? - no
• Handles stamped with what? LEATHERMAN TOOL PORTLAND OR. on opposite faces of handles
• Inch ruler only, or inch/metric? inch / metric
• Date codes? 11-99
• Drop point knife blade or clip point? (saber?) shorter clipped area
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? USA
• Screwdrivers: pivot-in or pivot-out? - don't understand#3. Rivets or knurled screws? - rivets
• Lanyard attachment? yes
• (Old) small diameter or (new) large diameter plier pivot? OLD
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? USA
• A hard wire cutter notch? NO
• Handles stamped with what? (see pictures in next post for examples) ( top line)Leatherman Tool - (bottom line )US REG TM 1325473 Portland OR.........ONLY ON ONE SIDE - ONLY ON ONE HANDLE
• Inch ruler only, or inch/metric? Inch / Metric
• Date codes? NONE
• Drop point knife blade or clip point? (saber?) - Saber
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? - USA
• Screwdrivers: pivot-in or pivot-out? - don't understand -
Couple of snaps.


Also on my KF4 :o [(http://i291.photobucket.com/albums/ll287/multimat426/multitools/77a5ab71.jpg)]
](http://


-
Yep, they came out just fine. 8)
Do you know if that PST was army issued, or did your boy buy it himself?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login