sLaughter's Hungry Ranger
-
Ive been planning this 3layer 91mm cellidor mod for a long time, and am very pleased with the results. Thanks TattooSteve99 and Syph007 for hooking me up with the parta I was missing.
First, my setup:

Pre-peening the brass rods:

Trimming the excess rod off:

Success! 93mm Awl, metal file, wood saw, large blade and corkscrew. I call it the Hungry Ranger:

Makes for an amazing lightweight carry with my Juice S2

And its thinner than a Climber!

-
A SAK without screwdrivers... At first I want to be all
and 
Then I see it is riding with an S2. Perfect companion piece for this SAK!
-
Nicely done mate.

-
End Awl

Great job

-
nice work. why call it hungry?
-
@Sparky415 said:
End Awl
Great job

Thanks, I love that awl too.
Thanks!
@ironraven said:
A SAK without screwdrivers... At first I want to be all
and 
Then I see it is riding with an S2. Perfect companion piece for this SAK!
There is method to the maddness. This SAK was intended to be a companion to my multis with scissors, in the same way my Climber is a companion to my scissorless multitools.
-
nice work. why call it hungry?
Because hes extra skinny, and he cant open cans or bottles.
the awl can open those ;)
-
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

-
@magentus said:
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
-
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
-
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
-
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
At the end of the day though our SAK's are very cool and we should feel very pleased with ourselves. We may be the best modders ever :D
-
[quote author=magentus link=topic=65166.msg1244654#msg1244654 date=1458724149]
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
At the end of the day though our SAK's are very cool and we should feel very pleased with ourselves. We may be the best modders ever :D
[/quote]
Heck yeah we are. Way better than that Syph fellow for sure. Who needs fancy equipment when I have a pile of dirty old SAKs and a big hammer?

-
[quote author=sLaughterMed link=topic=65166.msg1244806#msg1244806 date=1458742611]
[quote author=magentus link=topic=65166.msg1244654#msg1244654 date=1458724149]
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
At the end of the day though our SAK's are very cool and we should feel very pleased with ourselves. We may be the best modders ever :D
[/quote]
Heck yeah we are. Way better than that Syph fellow for sure. Who needs fancy equipment when I have a pile of dirty old SAKs and a big hammer?

[/quote]Mmmmmmmm dirty SAK's
-
[quote author=magentus link=topic=65166.msg1244820#msg1244820 date=1458744547]
[quote author=sLaughterMed link=topic=65166.msg1244806#msg1244806 date=1458742611]
[quote author=magentus link=topic=65166.msg1244654#msg1244654 date=1458724149]
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
At the end of the day though our SAK's are very cool and we should feel very pleased with ourselves. We may be the best modders ever :D
[/quote]
Heck yeah we are. Way better than that Syph fellow for sure. Who needs fancy equipment when I have a pile of dirty old SAKs and a big hammer?

[/quote]Mmmmmmmm dirty SAK's
[/quote]

Where's pfrsantos with his spoiler meme's when you need him? -
[quote author=sLaughterMed link=topic=65166.msg1244827#msg1244827 date=1458745528]
[quote author=magentus link=topic=65166.msg1244820#msg1244820 date=1458744547]
[quote author=sLaughterMed link=topic=65166.msg1244806#msg1244806 date=1458742611]
[quote author=magentus link=topic=65166.msg1244654#msg1244654 date=1458724149]
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Ah, yes, I didn't word it very well. My Pikachu has the newer thinner tanged main blade and I removed the spacer and popped in a very thin washer to make up the difference and on my Greenwood which has the older thicker tanged main blade I filed the spacer down a bit and that fits really well.
I wonder now whether I had to go to all the trouble I did
Thats why I always build a couple different versions before peening. I was preparing to do the same as you did on Pikachu, but figured id try it without first. It worked fine, so I left it stock. I actually started with a older, thicker tang blade and liner, but switches to the newer ones with the bump in the washer and thinner tang, as it actually fit a little better with the keyring spacer and awl.
Yours probably doesn't have the same gap that mine does though.
At the end of the day though our SAK's are very cool and we should feel very pleased with ourselves. We may be the best modders ever :D
[/quote]
Heck yeah we are. Way better than that Syph fellow for sure. Who needs fancy equipment when I have a pile of dirty old SAKs and a big hammer?

[/quote]Mmmmmmmm dirty SAK's
[/quote]

Where's pfrsantos with his spoiler meme's when you need him?
[/quote]Oh, I'm right here... You've got one problem, though...
Spoiler:

-
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
-
@Poncho65 said:
I do like the mod.very well sLaughterMed
I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
Won't work on the 91mm frame. Can be done on the 93mm with some work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login