How do people clean their multitools ?
-
@powernoodle said:
I rarely need to deep clean an MT, but when I do:- bucket of Dawn + hot water
- immerse MT, open and close tools repeatedly; swish tool back and forth, while moving hips rhythmically to La Macarena.
- carefully dry thoroughly with heat gun
- lightly oil pivots
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
yeah, i did NOT click on that video, i do not want that stuck in my head for the rest of the evening . . . .
-
so, basically, apart from those that let their dogs clean their MT's (only problem i have with that is my two gobsmurfes would just cut their tongues) the general consensus is wipe clean and carry on regardless ??
Pretty much so what i've been doing :)
-
@Leatherman said:
http://www.leatherman.com/maintenance.html
Depending on what your Leatherman has been exposed to, there are several cleaning methods to consider.If your Leatherman has been exposed to salt water or marine environments, it should be thoroughly rinsed in fresh water, dried, and lubricated with a water-displacing product. If stains or rust spots appear, refer to the Rust and Corrosion section above for removal tips.
If debris or sticky substances have accumulated between the blades, your Leatherman may also be cleaned in a mild solution of detergent and water.
To remove tar and similar substances, clean your Leatherman with turpentine or other mineral spirits. Do not use chlorine products.
After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40®) to force out moisture trapped in the joints. This also helps protect the tool from further corrosion and sticking.@SOG said:
http://www.sogknives.com/knife-tool-care.html
Regularly clean and fully dry your multi-tool, especially after use. When necessary, oil the pivot points with a light oil. Be sure to clean the blade and handle set after each use. A mild solution of soap and water should remove any dirt and debis that have accumulated during use (avoid harsh detergents such as laundry or dish soap, and chlorine products). It is best not to immerse your folding tool in water. To remove any debris from inside the handle you can use a toothpick for any visible lint or dirt, or a Q-Tip for smaller amounts of dirt and debris. Also, a can of compressed air is useful for completely clearing out any embedded dirt or lint. (Ensure that you follow all recommended cautionary guidelines that the product provides, as some compressed air canisters use an accelerant which might damage your tool's finish.) If extremely dirty or after exposure to salt water, rinse the tool in fresh water, or with a mild solution of diluted soap and water, and completely dry the tool with a soft cotton cloth. Apply a light coat of water-displacing oil (such as WD-40 or 3-In-1) or other desiccant (a drying agent), and then wipe down and lightly lubricate the tool's surface and pivot points. This will not only remove any dirt and debris which might inhibit the tool's functioning, but will also help prevent oxidation and rusting on the surface steel. (This is particularly important if you live in humid or marine environments.) Do not store the tool inside a pouch for long periods, as moisture will remain trapped in the fabric, and tanning oils in leather sheaths might accelerate oxidation and rusting.@Gerber said:
http://www.gerbergear.com/Meet-Gerber/Contact-Us/Frequently-Asked-Questions
Our products use a 100% high-grade stainless steel. Stainless steel is not completely resistant to rust but rather is corrosion resistant to rust. Corrosion can occur in the absence of proper maintenance. Your Gerber product should be cleaned, dried and re-oiled periodically to inhibit rust and corrosion; this is especially true in a damp or marine environment. If your Gerber product comes in contact with any substance that you are uncertain about, it is always a good idea to wash your blade off with tap water, dry it and apply a light coat of oil. If your Gerber product comes into contact with salsmurfer you must flush it with tap water immediately after use and coat it with good quality lightweight oil. Salt water is extremely corrosive and will attack and destroy any type of steel. Prior to the treatment of high quality light oil, be sure to clean the product of debris and moisture. Your Multi-Plier can be rinsed in clear tap water to help remove most of the debris. If dirt or grime is found in the groves, handles, etc., use a small soft brush to help loosen the trapped particles. When the tool is sufficiently clean and dry, apply the oil. Stained areas can usually be buffed out using a polishing cloth or non-metallic scouring pad.@Victorinox said:
http://www.swissarmy.com/medias/service-sak-care-tips-pockettools-en-apr2011.pdf?context=bWFzdGVyfHNha3wyMzMyMDd8YXBwbGljYXRpb24vcGRmfGg1Yi9oOGIvODc5ODIzMTM2MzYxNC5wZGZ8Njk5YThkNzExN2VhYjRiZDE5ZmZmYjgwYWIyZmFkZjI0Y2M3OGYzMGU4ZDA1MjdhZjE3ZDg0ZDM4YThkZjEzMg
http://www.swissarmy.com/medias/service-sak-care-tips-swisstools-en-apr2011.pdf?context=bWFzdGVyfHNha3wzMDA0ODJ8YXBwbGljYXRpb24vcGRmfGgyMS9oNjEvODc5ODIzMjU0MzI2Mi5wZGZ8ZTgzYzZhYzNiNjNiMDg1Y2MwYTE0M2QxYzkzNzEzNmU5MmY4MWQyYzdjMWY1YjU4ZWE2MDY1ODUzZWU5NTQ2Mg -
@hiraethus said:
Lick the blade clean, wipe it on my trousers to dry it and stick it back in my pocket to fester. Biological Russian roulette. 8)

...and now that I've stopped laughing... +1
-
Now, having stopped laughing (only chuckling now), for most my pliers-based MTs, what Hireathus said is what I do.
However, I've been sailing/racing with a Gerber original MT (ie, Mr. Pinchy) for years. It gets quite a salsmurfer bath on a regular basis and the sheath is usually soaking wet after a weekend on the water. For this one, I'm pretty diligent.
Rinse and dry out the sheath when done racing. Run Mr. Pinchy under warm water with all the tools opened. Wipe down and air dry. Then wipe down with either a very small amount of olive oil or with Boeshield T-9 and touch up the blades on ceramic rods.
I've lost track of the years, but that tool is in great shape, cuts line like it's butter, and the one-handed snap to open is like greased lightning.
-
My secret is using old business cards. They're the perfect width to reach deep and abrasive enough to pull out all the dust and grime. Works especially well on firearms as well. If for some reason I need to use my tool to prepare food I'll wipe as clean as possible with regular tap water. For those worried about germs - the MT is the wrong tool for food prep.
-
Clean?
Sometimes I work in the rain.
-
More and more often I've been showering with my Wave.
(Yeah, odd, but I usually am also wearing a bathing suit this time of year, and I usually jump in the shower with them still on)We keep a "utility" tooth brush on the rack and body soap seems to do a pretty good job of washing stuff off.
I will admit I'm definetly more careful, the last thing I want is a falling MT while there's no protection of shirt/pants.............
-
+1 for a quick wipe down with an anti bacterial wipe and then dry. A couple times a year I disassemble my Leek for a thorough cleaning along with Scallion. Others depend on usage
-
Clean?
-
Dishwasher
-
Easy answer... I use the ultra-sonic-cleaner my wife needs for her glasses. I put in there warm/hot water add some soap and put the MT in there. For about ten minutes.
It works great - it is great to see how many dirt and grit comes out of such a tool.
After drying it it gets oile with a little mineral oil.
Works fine for my MTs, Vics and Traditionals.
-
I always wash with warm water and dish soap. I use a toothbrush to scrub.
-
@NKlamerus said:
You mean you guys don't shower......?Fixed
-
Hot water, soap, micro-fiber cloths...
Chako on the other hand has a whole crew on regular, rotating 8 hour shifts.
-
Boiling water straight from the kettle whilst gently scrubbed with an old toothbrush, then fanned out and shoved in the oven to cook!!.....sterile clean

......and HOT!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login