What did you use your Sak on today?
-
@jalind said:
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
Yes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
- Have used an analog multimeter?
- Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?
- Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?
- Have used an analog meter with a mirrored scale?
- Know what a mirrored scale is for and how to use it?
Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOM -
@sLaughterMed said:
Today I decided that the Mexican Oregano I planted two summers ago in a tiny pot deserved a larger pot. But first I needed to make some drainage holes...Mexican Oregano you say....... Sounds suspicious.

-
@captain spaulding said:
Today I decided that the Mexican Oregano I planted two summers ago in a tiny pot deserved a larger pot. But first I needed to make some drainage holes...
Mexican Oregano you say....... Sounds suspicious.

No worries Cap, sLaughterMed lives down on Copperhead Road.....
-
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.
OK . . . show of hands now . . . how many:
* Have used an analog multimeter?* Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?* Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?* Have used an analog meter with a mirrored scale?* Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMYes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
Can you do dual precision calculations using a slide rule to get twice the number of significant digits as its tick mark precision allows? IOW, can you get six significant digits in the computation if the slide rule marks are only good to three significant digits. It does require a scratch pad and pen or pencil for intermediate results. Clue: the algorithm in a programming language math library (i.e. Fortran, C, Pascal, etc.) for dual precision calculations is exactly the same as was used with a slide rule!
John
[who is REALLY showing his age now] -
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.
OK . . . show of hands now . . . how many:
* Have used an analog multimeter?* Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?* Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?* Have used an analog meter with a mirrored scale?* Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMYes to all. I also know how to use a slide rule. Some of us are showing our age, lol.
Can you do dual precision calculations using a slide rule to get twice the number of significant digits as its tick mark precision allows? IOW, can you get six significant digits in the computation if the slide rule marks are only good to three significant digits. It does require a scratch pad and pen or pencil for intermediate results. Clue: the algorithm in a programming language math library (i.e. Fortran, C, Pascal, etc.) for dual precision calculations is exactly the same as was used with a slide rule!
John
[who is REALLY showing his age now]Prostrated and bowing head down with hands in front of me.
-
Used the Philips on my rambler to open the battery compartment on my lads new toy car
Sent from my iPhone using Tapatalk
-
@jalind said:
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
- Have used an analog multimeter?
- Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?
- Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?
- Have used an analog meter with a mirrored scale?
- Know what a mirrored scale is for and how to use it?
Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMMy old Sperry from the 70's, mostly used to check continuity, still works fine.


-
Actually one just like this one John...it was my Dad's and I still love how it works! I learned off of one of these when digitals were just coming into their own, and I still look at them as upstarts. BTW nice knife Robert! Love the character of those scales!!
Posted this in my STACK thread but thought I would also put it here too . . . with a fun little quiz at the end.
Adjusted the mechanical zero on this mirrored scale multimeter using the small flat tip on the end of the can opener blade (Cyber Tool 34, but very nearly any SAK would work). It was a bit off.

OK . . . show of hands now . . . how many:
* Have used an analog multimeter?* Have used an analog FET VOM (FET volt-ohm-meter, or even older, a VTVM)?* Know the difference between a multimeter and a FET VOM (or VTVM), and why a FET VOM might sometimes be preferred?* Have used an analog meter with a mirrored scale?* Know what a mirrored scale is for and how to use it?Just thought I'd ask some questions to take a trip down memory lane, and yes, I still have an analog VOM too! This is the cheapie multimeter I keep in a kitchen drawer.
John
Edit to clarify VOMMy old Sperry from the 70's, mostly used to check continuity, still works fine.

-
Opening paint cans and fixing a loose toilet roll holder.
-
Just replaced the oil pressure bulb. Lucky me, the Spirit is in the belt pouch.

Sent from my SM-J500G using Tapatalk
-
Nothing out of the ordinary for me, but my son used his Wenger Esquire's nail file as a makeshift screwdriver to fix a screw that came loose on his trekking poles while on a hike yesterday.
-
-
Used the scissors on the Classic to open a bag of smoked almonds for my wife and I to snack on, and the blade to open mail.
-
Touch up my Manager

Sent from my SM-J500G using Tapatalk
-
Showed my 2year old daughter how to use a sak saw, albeit a plastic one !

Sent from my iPhone using Tapatalk
-
And teaching my lad how to whittle with the craftsman

Sent from my iPhone using Tapatalk
-
Nice Weasel

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


