Lansky sharpening system users.......
-
Great post and video, thanks!
Inviato dal mio LG-H500 utilizzando Tapatalk
-
For a total newby what easy sharpening system do you recommend?
Lansky, Spyderco...? -
I like the Lansky sharpening system. I have literally sharpened hundreds of blades on mine, and I had virtually every stone that was available at the time. I did have one issue with it, and that's basic geometry. It didn't matter as much with shorter blades like pocket knives, but for edges bigger than 5-6" it could be a real pain.
The pictures below show the difficulty, as good as I can explain it, but since it is a pivoting system it only works to create a smooth edge on knives of a certain size. Exceed that and you start to get an uneven edge, and it gets worse when you go with larger blades because you need to re-position the clamp multiple times.
It's good for quick touch ups and for novice users, but I often found that I had to re-profile blades somewhat for use with the Lansky so I went back to steels, rods and stones.
Def


-
Great point Boss.

So heres what I see we are talking about
Factory edges is no longer easily cutting = Dull. What to do? Typically we don't need to "sharpen" at this point. What we can do IMO is a couple of things. We can HONE the edge. HONE is realigning the rolled over cutting edge. This can be done by ceramic rods and such. There are also ways to mimic ceramic rods by using coffee cup bottoms and the tops of our auto windows or even cardboard boxes. Keep in mind this method on super steels or hard wear steel probably wont work and will probably require diamonds rods. On our SAK blades tho almost anything works to get that edge realigned.
Chips, very dull edges, wonky bevel grinds etc are some situations where SHARPENING comes into play. This is where material is being removed to revel a fresh new bevel. This is where on the opposite side of the blade you will feel a burr.
Sharpening our SAKs is not really needed unless we damage the edge or really neglect it.
Please keep in mind this is a very rough explanation.
My suggestion for the money is still the Lansky Turn box with 4 rods. I'd also suggest fooling around with some old leather and stropping. If you need to actually sharpen I can suggest the Lansky Sharpening system with clamp and such. I like it and while it has some inherent issues for the money I'm happy to own 2.
-
I had bought the basic set and ended up purchasing almost all of the other individual stones for it separately. I had the diamond stones, the standard stones, the serrated stones and the ultra fine stones that would polish the edge to a mirror finish, which looked gorgeous but left the edge to slick to actually cut anything.
I am a big fan of the system, and for the average person I think it is brilliant. I just think that folks that are really into edge geometry may want to try something else instead.
For example, when my father called me asking me about sharpeners and looking at one of those God awful electronic doodads I told him not to, and to get the Sharpmaker instead. Well, he did, and he loves the Sharpmaker so much that I think even every spoon in his house has a razored edge now!
The Lansky was actually the first thing I was going to suggest for him, but in the end I decided not to as it would end up being too much effort to set up and tear down and he'd probably end up buying one of those terrible electric doodads anyway.
Def
-
@Grant Lamontagne said:
he loves the Sharpmaker so much that I think even every spoon in his house has a razored edge now!
Great post Aloha
I am back an forth with the Lansky, Sharpmaker and my diamond bench stones and other diamond sharpeners 
The Lansky does a great job at reprofiling blades and leaves a beautiful edge

-
I use their turnbox, the sharpening is too expensive for me :'(
-
I think whats "best" is what works for you. This is gonna be different for each knife user and more importantly depends on what you are trying to do.
I would like to try the sharpmaker, Edgpro, wicked edge, and of course chosera stones. I've used lessor quality whet stones in the past and produced terrific edges.
In all reality very few of us "need" edges that rival the legendary samurai edge. This excludes professionals, hunters, those earn their money with their knives, etc. Most will do fine with out the box sharp knives ( more or less ). All my opinion of course YMMV.
Polished edges sure look great. There are different schools of thought and as many "tests" against doing it. I'll say this on the topic, I have serrated blades for when I want "toothy" and my polished PE blades for everything else
. Most our MTs come with one of each tho many dislike serrated edges
. All time favorite knives of mine, Delica and Native fully serrated.I'm certainly no expert nor do I claim or am I claiming to be. I have produced some terrific edges with my Lansky and re-beveled/profiled many that were really wonky. Keep in mind I don't buy new! All mine come to me previously used and in many cases what one thinks is "hair popping" isn't. This includes nearly all my MTs and SAKs with very few exceptions. My knives may not represent what y'all get so keep that in mind.
Stropping is a must for me, when my edge needs a touch up thats what I do. I rarely "re-sharpen" my knives after my initial edge "correction" and setting. I'll strop and if that isn't working ( rolled edge, chip, etc ) then I'll hit it with the ceramic rod then strop.
My 2c on the topic. I am very much still learning and very much loving this whole process.


-
Off topic ::) I love the contrast of BO tools and their blades edge

-
Stropping is a step I often overlook and forget
I usually just hit it a few strokes on a very fine diamond stone and it is back to shaving sharp 
What kind of compound does everybody recommend for loading up a leather strop BTW

-
I think the BO and not coated edge make a wonderful contrast as well.
I use the cheap stuff from Big box store ( green ). My strop is an old leather belt with flat nap. I know guys are using diamond drops and other exotic stuff but I've not gone there yet ( maybe never ).
Keeping my theme of buying and using used gear my set up ( Lansky & Spyderco ) are previously used with, my Turn Box I bought new.
I have black and white compound as well but mostly use the green.
-
Aloha007
Nice edges
With a little practise and patience the Lansky system does a very good job
-
@Marcellus said:
Aloha007Nice edges
Thanks I appreciate it
. Just wanted to even out the LM grinds and add a little pizzaz. -
I still free hand sharpen every so often to retain the skill ( so I stay sharp, if you excuse the pun)
Even with many years experience, I can't duplicate the Lansky edge as well -
[ALEPH78 USES THREAD NECRO] [IT'S SUPER EFFECTIVE!]
So, what would you guys recommend for a beginner? I've never been really good at sharpening so I'd require something easy.
I read about and saw some videos of the Lansky Sharpening system, and it looks promising and affordable. Or could I just
do with the Lansky Turn Box? I know I need a bench stone of some kind for my puukko, but for the SAKs and MTs?Some advice would be grreatly appreciated.

-
I find the Lansky system is good for initial sharpening where you want to control the grind angle or need to re-shape an dull edge, but I find it annoying on longer blades (e.g. kitchen knives) and fiddly on narrow ones (like a SAK pen blade). The rubber pads that clamp the blade don't work that well on a small blade. But it works, and does a good job. The turnbox is great for touch ups, once you've set the edge angle. So, in true MT.o fashion, get both.
:) -
@hiraethus said:
I find the Lansky system is good for initial sharpening where you want to control the grind angle or need to re-shape an dull edge, but I find it annoying on longer blades (e.g. kitchen knives) and fiddly on narrow ones (like a SAK pen blade). The rubber pads that clamp the blade don't work that well on a small blade. But it works, and does a good job. The turnbox is great for touch ups, once you've set the edge angle. So, in true MT.o fashion, get both.
:)Yeah, that's what I was afraid of :P
:D
-
OK, next question, what would be a good price for the Lansky system and the Turn Box? Don't like to be ripped off...
I think I saw the System going for 30 USD on the evilBay and Turn Box for 15 USD ???
-
@Aleph78 said:
OK, next question, what would be a good price for the Lansky system and the Turn Box? Don't like to be ripped off...I think I saw the System going for 30 USD on the evilBay and Turn Box for 15 USD ???
Sounds about right for the Lansky system
No idea about a price on the Turn Box though
Seems to be a good price but I don't have one nor ever looked at prices of them ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login