Show off your Sak mod's!
-
My not-so-recently made, but just now posted to the forum, Cyber Yeoman mod.
Layers:
Combo Tool, Large blade, Corkscrew with eyeglass driver
Cyber Tool Layer with Robertson 1 and 2 bits added from a small precision driver set
Scissors, nail file hook
Black Scales with Tweezers, Toothpick and PinNote the lack of keyring attachment. I wanted it, but put in the wrong spacer plate when reassembling. It bugged me at first, but I don't mind it so much now. Might redo it if I can find some brass pin stock.
-
@Toolslinger said:
My not-so-recently made, but just now posted to the forum, Cyber Yeoman mod.Layers:
Combo Tool, Large blade, Corkscrew with eyeglass driver
Cyber Tool Layer with Robertson 1 and 2 bits added from a small precision driver set
Scissors, nail file hook
Black Scales with Tweezers, Toothpick and PinNote the lack of keyring attachment. I wanted it, but put in the wrong spacer plate when reassembling. It bugged me at first, but I don't mind it so much now. Might redo it if I can find some brass pin stock.
Looks good! i've been considering a similar mod since I got my CT34, but I dont have the heart to tear it apart.
-
My not-so-recently made, but just now posted to the forum, Cyber Yeoman mod.
Layers:
Combo Tool, Large blade, Corkscrew with eyeglass driver
Cyber Tool Layer with Robertson 1 and 2 bits added from a small precision driver set
Scissors, nail file hook
Black Scales with Tweezers, Toothpick and PinNote the lack of keyring attachment. I wanted it, but put in the wrong spacer plate when reassembling. It bugged me at first, but I don't mind it so much now. Might redo it if I can find some brass pin stock.
Looks good! i've been considering a similar mod since I got my CT34, but I dont have the heart to tear it apart.
This one is a CT29 and Compact fusion.
I modded my CT34 by removing the pliers and adding the Metal File. Now it's a Cyber Modeller. Wider though and has more redundancies with my Swiss Tool so it sees less pocket time.
-
Here's my first SAK mod, nothing spectacular but we've all got to start somewhere.
Waiter to Apprentice
Cheers
Jon
I'm piling up the necessary stuff to make at least two of these. What was the "organ donor" for the Phillips?
Thanks
JohnTinker is the cheapest, most readily available source, but any 91mm Victorinox with a backside Phillips driver will work for making Apprentices. (So Super Tinker, Deluxe Tinker, Hiker, Fieldmaster and Matterhorn etc. Will also work.)
-
Here's my first SAK mod, nothing spectacular but we've all got to start somewhere.
Waiter to Apprentice
Cheers
Jon
I'm piling up the necessary stuff to make at least two of these. What was the "organ donor" for the Phillips?
Thanks
JohnTinker is the cheapest, most readily available source, but any 91mm Victorinox with a backside Phillips driver will work for making Apprentices. (So Super Tinker, Deluxe Tinker, Hiker, Fieldmaster and Matterhorn etc. Will also work.)
Thanks . . . that's what I've been going after . . . Tinker with damaged blades/tools . . . the top side and scales take the thrashing and for some reason the Phillips is nearly always unscathed.
John
-
Nie dotykać!
Urządzenie
elektryczne!
:P
http://www.urbanremainschicago.com/products/vintage-signs-advertising/high-voltage-signs.html
-
Gadsden Huntsman

-
@Spork, Lord of Lime Jello! said:
Gadsden Huntsman
Ooo that blade looks interesting
It's my most important Mod tool..it's an unsharpened blade blank made for a Camillus Coast guard knife. It has a perfect profile for removing scales...just have to run it around the bushing and it wedges the scale free. I also use it for disassembly.
-
@Spork, Lord of Lime Jello! said:
@Spork, Lord of Lime Jello! said:
Gadsden Huntsman
Ooo that blade looks interesting
It's my most important Mod tool..it's an unsharpened blade blank made for a Camillus Coast guard knife. It has a perfect profile for removing scales...just have to run it around the bushing and it wedges the scale free. I also use it for disassembly.
Cool. I use a trashed 91mm small blade for that, although not as successfully
-
Well, I finally grew a set and went beyond removing the scales, and well, it was a b***h! But I think it turned out ok, not everything I wanted, I just didn't have the other tool.. I would have liked to switch out the corkscrew for a Philips but you do with what you have! Ok, so here's what I did, I popped out the small knife and put in a nail file, which fit yet didn't, it was a little bit more narrow then the knife so I had to add a little spacer, and it also disappeared when contracted, so I thought of something and filed the tool down so it would sit with the nail nick above the scale(complements to Syph for making sure before I did so).. I know big but hey something new!
JR
Oh so here is what used to be a climber,,

-
I know that scales are a bit of a grey area as being a mod but here is a bunch I'm working on.


-
Nice

and personally I count scales as mods.
-
Started in 2008. 17 knives until today. For my use and pleasure only

- Ranger. Handles: brass, melamine.
- Huntsman. Handles: melamine, bail. Tip of wood saw changed into nail cleaner.
- Super Tinker. Brass visible rivets. Old full cellidore handles. No key ring.
- Custom. 5 layers. 2 large blades, small blade, reamer from 93 mm…
- Custom. My EDC. 7 layers. Brass handles. 2 large blades, small blade, reamer from 93 mm, back Phillips driver, marlin spike from front Phillips driver…
- Spartan. No key ring. Handles: brass. Mini screwdriver.
- Executive. Handles: brass
- Modified MiniChamp. Reamer from 91 mm instead of cuticle pusher and flat screwdriver with ruler. Handles: brass.
- Wenger Classic 17. Handles: stag
- Modified Wenger Mike Horn Ranger. Wood saw instead of serrated blade, Standard blade instead of OHO blade. Handles: melamine.
- Custom 111 mm. 4 layers. Handles: brass, stag. Bail. Liner lock large blade, small blade from 91 mm, scissors, marlin spike made from small Phillips screwdriver, wood saw, large cap lifter with screwdriver, reamer.
- Electrician Plus + scissors from 91 mm, electrician's blade modified.
- Custom 93 mm. 7 layers. 2 large blades, small blade instead of can opener. Electrician's blade, reamer, Wood saw, metal saw, magnifying glass, Phillips screwdriver, scissors, cap lifter.
- Custom 93 mm. 5 layers. 2 large blades, pruner blade, electrician's blade, small blade, custom middle sized blade, wood saw, cap lifter. Scales painted red.
- Custom 93 mm. 1 layer. Modified large blade into middle sized clip point blade, reamer.
- Custom 84 mm. 3 layers. Large blade, small blade, 1 large blade modified into sightly down curved blade, can opener, cap lifter, cork screw, reamer. Modified alu scales for backtools.
- Custom 84 mm, fun project – »Barlow« knife. 2 layers, large blade, small blade. Handles: brass, melamine.
Samek
-
Nice!
Sent from my SM-G920R4 using Tapatalk
-


Red electrician and soldier electrician :)
-
Hello, this is my first time posting anything on these forums but I thought I would share my latest creation. I made some 93mm aluminum scales with the grid pattern of the model 61 soldier knife. I added of course a few differences to the shield. ;) The anodizing didn't turn out the way I hoped but maybe next time.. Hardened pivots, turned screw faces, phosphor bronze thrust bearings. I was just happy to get all the digitizing and alignment of holes correct for this first round. Now off to tinker with it some more! :D
-
@Griffon75 said:
Hello, this is my first time posting anything on these forums but I thought I would share my latest creation. I made some 93mm aluminum scales with the grid pattern of the model 61 soldier knife. I added of course a few differences to the shield. ;) The anodizing didn't turn out the way I hoped but maybe next time.. Hardened pivots, turned screw faces, phosphor bronze thrust bearings. I was just happy to get all the digitizing and alignment of holes correct for this first round. Now off to tinker with it some more! :DStunning!! Really well done.
Sent from my E6653 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





