What's your latest SAK?
-
Victorinox expedition xlt, pure happiness.

Sent from my SAMSUNG-SM-N920A using Tapatalk
-
[pic of many layer red scale 111mm closed up]
WorkChamp? That's got a great tool set in a larger size.
Hard to tell but it strikes me as a Hercules....
Was going to hope you didn't get cut or bruised when it struck you as the Hercules has some mass . . . but someone beat me to it.
Looking at the photo I can see both Phillips, which both would have. In searching for evidence of the file, which is the major differentiator, it appears there's just a bit of file crosscut showing which is much coarser than the brushed finish sides of the wood saw. Partial tool setup from front to back: scissors, wood saw, file/metal saw, and then the pliers. Liner separating the wood saw from file is wavy, and you cannot see the wood saw edge as easily as the file. They're narrower layers compared to the scissors and pliers. You might be right, as that's the other one that has both Phillips, but I'd still vote on WorkChamp.
John
-
@leathermon said:
Victorinox expedition xlt, pure happiness.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Cool! One of those SAK's with electronics in the scales are still on my wishlist :D
-
[pic of many layer red scale 111mm closed up]
WorkChamp? That's got a great tool set in a larger size.
Hard to tell but it strikes me as a Hercules....
Was going to hope you didn't get cut or bruised when it struck you as the Hercules has some mass . . . but someone beat me to it.
Looking at the photo I can see both Phillips, which both would have. In searching for evidence of the file, which is the major differentiator, it appears there's just a bit of file crosscut showing which is much coarser than the brushed finish sides of the wood saw. Partial tool setup from front to back: scissors, wood saw, file/metal saw, and then the pliers. Liner separating the wood saw from file is wavy, and you cannot see the wood saw edge as easily as the file. They're narrower layers compared to the scissors and pliers. You might be right, as that's the other one that has both Phillips, but I'd still vote on WorkChamp.
John
We had Electricians walking around in here so I had just given it a cursory glance.

-
Vic Ranger Ibach Topo Map.
Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
-
Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
Good old Australia, neighbour-country of Switzerland. Erm, not.
http://www.operationworld.org/files/ow/maps/lgmap/autr-MMAP-md.png
-
@ColoSwiss said:
Vic Ranger Ibach Topo Map.Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
That's the "Navigation of Cool" Karl!!!! 8)

-
Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
Good old Australia, neighbour-country of Switzerland. Erm, not.
Swallows could have carried it there. How long it takes depends on whether they're African or European. Lacking any better information I'd guess European but guessing at anything is an enormous risk at the Bridge of Death that spans the Gorge of Eternal Peril.
John
-
Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
Good old Australia, neighbour-country of Switzerland. Erm, not.
Swallows could have carried it there. How long it takes depends on whether they're African or European. Lacking any better information I'd guess European but guessing at anything is an enormous risk at the Bridge of Death that spans the Gorge of Eternal Peril.
John

-
:D
-
@ColoSwiss said:
Vic Ranger Ibach Topo Map.Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
I've been trying to get one of those too. I'm going to Zürich next week, maybe I'll find one there.
-
Vic Ranger Ibach Topo Map.
Had to get this from a dealer in Australia. None of my regular European dealers carried it. This is getting irritating.
I've been trying to get one of those too. I'm going to Zürich next week, maybe I'll find one there.
I can help if needed, the dealer I suspect Coloswiss is talking about is Peters of Kensington
http://www.ebay.com.au/itm/NEW-Victorinox-Zurich-Topo-Ranger-Swiss-Army-Knife-/252282383339?hash=item3abd33abeb:g:~FkAAOSwe7BWuohk.
I'm not too far away from there, if Zurich or ebay doesn't work out -
Just been over to the Victirinox shop on Bond St. Yes,they have the Pioneer X,and now,so do I!

-
-
-
Lesser known Wengerinox from the 1950s? Newer transition bail? I've never seen a magnifying glass from this era, it's got a file on the side, and a fine flat driver as the successor does. All the tools are in really good shape, the scales looked a little banged around and minor heat blisters near the inlay.
What do you think?



-
Looks awesome!
No idea on your questions!!! -
Just been over to the Victirinox shop on Bond St. Yes,they have the Pioneer X,and now,so do I!

Sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet
Duuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuude!
You think you're funny?!
Spoiler:



Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login