What's your latest SAK?
-
Kudos Karl!!!

-
Huntsman and Spartan. Two SAKs after a very very long time, 15 years I think. Some of you enabled me :P


-
This vintage Super Tinker came in yesterday, and it's mostly cleaned up now. Scales were in super condition. Most of the issue is dirt and grime, and it's down in the springs and pivots. Still working on getting the last of it flushed out. The black is stunning. It's an interesting vintage with its combination of details:
* Reverse scales; Victorinox shield logo is on the back above the Phillips driver. * Phillips driver tip has the sardine can opener vertical slot. * Awl has sewing eye. * Bottle opener has 90 degree stop. * Scissors have screw. * No package hook. * Main blade is 2.4mm and tang has umbrella logo on (what would normally be) back side. * Main blade has Victorinox Switzerland Stainless Rostfrei on (what would normally be) front side.
A tool set I had not considered before, as the Tinker has a lot going for it with the combination of flat tip and 3-D Phillips, but the scissors add a utility that I use routinely.
I seem to be accumulating more knives recently with black scales!
I see red cellidor and want it to be black
No colors any more I want the scales blackJohn
[with deep apologies to Mick Jagger and the Rolling Stones] -
Right that's it, I'm not buying any more coloured alox for the rest of the year!

-
This Soldier rolled in yesterday. Cleaned it up some, but still needs some work. It's been used, but not what I would call abused. Main blade has some minor scratches and scuffs, which I knew about, and will have to be very careful if I do anything with it, not to damage the etched signature. This one was a TSA airport seizure so I wasn't expecting one in pristine condition. Overall I'm happy with it and don't mind putting some sweat equity into restoring what I can. I don't think the seller knew what she had or it would have been advertised differently.


John
-
- Main blade is 2.4mm and tang has umbrella logo on (what would normally be) back side.
-

Really digging this knife. Wish I had the Wenger version, but I'm really glad Vic kept some of the Wenger spirit going. Really comfortable knife, although the blade is misleading. The cutting edge of the blade isn't that much bigger than the Vic 111mm line. It is more comfortable and has a cooler lock mechanism though.
-
This trio of Wenger Commanders with Loctite and Permatex logos rolled in today. BNIB, it's obvious they've been on a shelf for a while from not only shelf wear and signs of aging on the boxes, the lube in them has yellowed and is a bit stiff. Will require some minimal cleaning and lubing. They're otherwise pristine.

These also have a
strange umbrellacrossbow logo on the tang.John
-
* Main blade is 2.4mm and tang has **umbrella** logo on (what would normally be) back side.I bet each time it rains he gets soaking wet... and the cops chase him!

Geez - and all this time I thought that umbrella is what kept the blades from rusting when they got wet!
-
Couple in today....
Airvac Blue Traveler and a Black EVO 14

-
Love them Robert!!! -
Couple in today....
Airvac Blue Traveler and a Black EVO 14

Nice set!
Thanks glen!!
-
@NetsNJ said:
Really digging this knife. Wish I had the Wenger version, but I'm really glad Vic kept some of the Wenger spirit going. Really comfortable knife, although the blade is misleading. The cutting edge of the blade isn't that much bigger than the Vic 111mm line. It is more comfortable and has a cooler lock mechanism though.I have the Vic EvoGrip 178 and like it very much. Mine is a bit stiffer to one-hand compared to the 111mm; may be the thumb hole size and location. Your remark about blade cutting edge length had me pulling it out and the 111mm OH GAK to compare them. Hadn't looked at the actual cutting edge before, which starts a little farther down the blade on the EvoGrip. My uncalibrated eyeballs tell me the EvoGrip's cutting edge is only about 1/4 inch longer. Didn't measure around the curve, as the GAK has a little more belly to the blade, which may reduce that a little more. I also like the EvoGrip lock a little better. I've gotten used to the liner lock on the 111mm and using it; may have been a little more difficult to use when the tab had a lower profile and none of mine have that older design.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
