Farmer with scissors and no gap
-
Thanks for the help Harryf3. Now it's my turn. I am making a pioneer with scissors for a friend. This thread helps a lot.

-
Cheers Steven
What kind of backspring will you use for the scissors? -
Old style solid with no cutout. Just like the one you had.
-
That's great mate! Wish you a happy grinding :D >:D
-
Well that was not as bad as I thought. I drilled the hole with just a tini coated bit. Then widened the scissor hole with a diamond burr....hehe cheated there a little. I have a variable speed bench grinder with 42 inch belt so not that much grinding here :D . I made a liner so I didn't have to butcher another one and now its almost done. I have one question for harryf3. Did the scissors hit the liners? I reversed mine so that they sit the same way with blade and now they don't hit the liners.
-
Looks like you did a geat job Steven. We need pics of the backspring alone and the assembled knife.
I prefer the scissors to be opposite to the blade.
If the scissors hit the liners then something is not straight. The pivot hole, the part of the backspring on which the scissors are turning when you open or close them (there is much contact and friction there and maybe it has an angle/edge created from not straight gringing) or you have a bent pin.
If you do not have much snap on the last assembled tool-layer then you need to make pins with bigger heads and conic shape under the heads. The pins should not move or make an angle with the scale when you start assembling the layers or you end up with a last layer with little snap or no snap at all or/and the tools will hit the liners or touch each other and this will not allow them to move free.
cheers atb Aris
-
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?
-
@RX-79G said:
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?You mean the one that became the scissor spring in the new Alox knife? It was originally a pre-hook 91mm scissor spring.
-
Rather than reinvent the wheel, wouldn't it now be easier to get a Pioneer-X and add a saw layer? Making that backspacing might be more expensive and time consuming than buying and modding a Pioneer-X and Farmer.
Either way, good luck.
-
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?
You mean the one that became the scissor spring in the new Alox knife? It was originally a pre-hook 91mm scissor spring.
Ah, thank you.
Is that older style at all common on the used market?
-
Or you can use an Alox Solo backspring for the Scissors layer.
PioneerX and Farmer leaves enough fodder for a regular Pioneer though, and no waste
-
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?
You mean the one that became the scissor spring in the new Alox knife? It was originally a pre-hook 91mm scissor spring.
Ah, thank you.
Is that older style at all common on the used market?
To be honest, ive never seen it before. I dont think Alox modding really took off until Serval figured out that Solo backsprings worked well for scissors. I think it had to do with the fact the average consumer would consider a gap from the 91mm spring "unacceptable" for sale. The solo spring fixed that, opening up demand for that mod, leading to most mods currently on the market having a Solo spring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login