3D design progress
-
I've continued working on my kayak design and I have added bulkheads, cockpit coaming and brackets for the hatch covers.
Also a slot for the rudder to fit in.
Def

-
might high tech looking tooth pick
:P -
Taking a break from the kayak project today, I decided to try one of those three way corner brackets that you use for assembling frames for things like tents. I ended up doing two different ones, both set up for 20mm diameter rods for no reason other than that's what I thought of.
The one on the left was done by making a half cube (three sides) then putting circles at the various corners and extruding them into the shared corner then deleting the cube. This worked sort of, but the junction of three round pieces seems both a bit weak to me and also seemed to upset the software greatly, so I tried to build a cube in the middle to reinforce them and fix the issues the software was having in the joint. As I was failing miserably at trying to build the cube in the middle (couldn't get the placement exactly right) it occurred to me that I was going about it backwards.
So, instead of doing the piping and then attaching the cube, I started again and created the cube first, then extruded the pipes from the cube, then cut off the corners of the cube that I didn't need in order to save print time and plastic, should it ever get printed.
The second attempt, the one on the right seems far superior to the one on the left. Live and learn, right?
Def

-
@Grant Lamontagne said:
Live and learn, right?Absolutely. There's no right or wrong way* to make a 3D model of something, but often you'll find that whatever software you're using can't do it the way you first thought - there's one method that just seems easier than all the others.
You need to get into curves and lofts fit the kayak project.

- but some methods are definitely better than others ;)
-
@Grant Lamontagne said:
Live and learn, right?
Absolutely. There's no right or wrong way* to make a 3D model of something, but often you'll find that whatever software you're using can't do it the way you first thought - there's one method that just seems easier than all the others.
You need to get into curves and lofts fit the kayak project.

- but some methods are definitely better than others ;)
Curves are definitely a problem for me at the moment. I can't seem to do anything with curves and I'm still not sure if it's a limit of the software or my abilities. I'm assuming it's me.
I did manage to locate my copy of Sketchup 8 for Dummies, and even though I'm using Sketchup 2016 it seems to be helping a lot. I still have a long bloody way to go though.
Def
-
I found this awesome gadget on eBay that allows me to keep my Surge handles closed for ONLY $12! Well, I can't afford $12 so I decided to see if I could reverse engineer it because the internet is completely free, right?
Redundancy not included.....
Def

-
I'll take 10! -
Sneaky... that other guy copied your idea then went back in time and posted it on ebay!

-
It's worse than that- he also went back in time and stole my design for the Flux Capacitor! :ahhh
Since I had Sketchup open I decided to fiddle a little bit with the DefTool design a bit more. I made it more pocketable by cutting off some corners and labeling things, because apparently that is all that is required these days to pretend something is a whole new model. :P
I also fixed the can opener so it can be used as a bottle opener as well. The current list of functions is:
Can Opener
Bottle opener
1/4" hex slot
Double ended screwdriver bit
4mm wrench
8mm wrench
12mm wrench
Prybar
Nail puller
Cutting edge
02 Wrench
Flathead/phillips screwdriverThe pill shaped slot is where the double ended screwdriver slot would fit, with a couple of rubber o rings to hold it in place. I have fallen into the trap of trying to include as many functions as I can without worrying about actually using those tools... but then unlike the "designers" that do that, I have no intention of putting this into production. :D
Def

-
Grant, great start but I'll help out for ultimate success!
-
You dont have near enough dedicated hex holes. Its considered quite a newb mistake its ok... :D The unspoken rule in OPT design is to make 20+ random hex cutouts scattered around like a dropped bag of skittles on the floor. Also consider non hex holes, as they somehow also add to the mystique of the tool. You can make fun of people who dont know what the crescent moon shaped cutout if for... smart buyers will be too afraid to ask. Throw in some peanut shaped ones... everyone knows those are the next hex shape.
-
Its best if you have never used or owned tools. You're at a bit of a disadvantage there too. The best OPT designers have backgrounds in art history or retail management, and have never even held a tool in real life. They can quickly dismiss comments from actual tool users as they cant comprehend them. :D
-
Now what you need is ATTITUDE. Post that wicked piece of swiss cheese metal art on kickstarter with BIG BOLD challenges. No other tool has so many functions... be sure to list them all with creative uses. Dont worry its makes no difference if the uses are stupid, its all about quantity. (one sided not returning boomerang is fine FYI.. etc) You can even post a giveaway contest to see if anyone can possibly conceive of a tool that can come close to yours... but that might be going too far.

-
Buy a big bag to hold all the money!!!

-
-
Well, I didn't add more hex cutouts or fancy peanuts, but I did add a spark plug gapper and a lanyard hole- does that count?
I also started thinking of a tactical black version to see if I could charge more for it.
I wonder if I should do a Kickstarter campaign for it.... could be fun to see what happens....

Def

-
I had a quick search on there, and didnt see near as many of the OPTs as a year ago. Maybe they arent as in fad anymore.
I only found one failed one.
Ah found more, had to search multitool
-
Here's a challenege, a 3d printed MTO fishing lure!
Catching a fish on one is instant merit badge approval :D
-
A fishing lure with a bottle opener..... sounds interesting!
Def
-
@Grant Lamontagne said:
Well, I didn't add more hex cutouts or fancy peanuts, but I did add a spark plug gapper and a lanyard hole- does that count?I also started thinking of a tactical black version to see if I could charge more for it.
I wonder if I should do a Kickstarter campaign for it.... could be fun to see what happens....

Def
I like the fact that there is an actual "blade". So many one piece tools are afraid to build in something sharp. Looks really great.
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
@PTRSAK said:
Whoa, whoa, whoa people... we nearly missed something EPIC.@Grant Lamontagne said:
A fishing lure with a bottle opener..... sounds interesting!
Def
Combining the two greatest activities of all time, They'd sell like hot cakes. :ahhh :ahhh
Is it sad that I'm already working on it? :P
Def
-
Not crazy about the outside sharp-pointy blades... still better than the Metperial though :D
-
-
What's the sharpened part next to the 1/4" hex cutout for, again?
I think you need to make the flat SD a little longer than the can opener, Boss, and change the can opener's shape a bit to make it more pocket friendly. Alternatively, you could provide a good pouch for the tool to be kept in. Not a bad design overall.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login