SAKs & Coffee
-
Thanks Weasel!

-
Warning: crappy indoor cell phone photo incoming.

Black coffee, black SAK (Timekeeper). If I don't quit smoking, soon I'll have black lungs, too. Oh dear

-
Master craftsman and cappuccino

-
Freshly peined Apprentice #3 being initiated over The Mug of Eternal Peril with Apprentices #1 and #2 there to show their solidarity! If you know what the peined heads on each side of the back layer tool pin look like and compare it to this one (other side looks the same), you'll note this one is much larger diameter and thicker, making it much more robust to the kind of torque stresses the Phillips might exert on the pin heads via the liners trying to spread.

I need to clean it again to get rid of remaining brass dust and some of the other crudmium accumulated during its metamorphosis. One more to go and I'll get a Spartan from it too.
John
-
Nice pic sir!
@Subterranean said:
Warning: crappy indoor cell phone photo incoming.
Black coffee, black SAK (Timekeeper). If I don't quit smoking, soon I'll have black lungs, too. Oh dear

-
Now THAT's solidarity John!

@jalind said:
Freshly peined Apprentice #3 being initiated over The Mug of Eternal Peril with Apprentices #1 and #2 there to show their solidarity! If you know what the peined heads on each side of the back layer tool pin look like and compare it to this one (other side looks the same), you'll not this one is much larger diameter and thicker, making it much more robust to the kind of torque stresses the Phillips might exert on the pin heads via the liners trying to spread.
I need to clean it again to get rid of remaining brass dust and some of the other crudmium accumulated during its metamorphosis. One more to go and I'll get a Spartan from it too.
John
-
@Barry Rowland said:
Now THAT's solidarity John!
Freshly peined Apprentice #3 being initiated over The Mug of Eternal Peril with Apprentices #1 and #2 there to show their solidarity! If you know what the peined heads on each side of the back layer tool pin look like and compare it to this one (other side looks the same), you'll not this one is much larger diameter and thicker, making it much more robust to the kind of torque stresses the Phillips might exert on the pin heads via the liners trying to spread.

I need to clean it again to get rid of remaining brass dust and some of the other crudmium accumulated during its metamorphosis. One more to go and I'll get a Spartan from it too.
John
Thanks Barry. I may try four after the next one is done!!
-
@Subterranean said:
Warning: crappy indoor cell phone photo incoming.
Black coffee, black SAK (Timekeeper). If I don't quit smoking, soon I'll have black lungs, too. Oh dear

Looks pretty good to me!
-
That's a very nice GAK, can I ask where you got the replacement scales from ?
-
@K9medic said:
That's a very nice GAK, can I ask where you got the replacement scales from ?Thanks

I bought the scales some years ago, as they where still available as
replacement parts for the 108mm Solos. Now, they are out of stock
in all shops I found.
If someone find/know a (online) source for getting these today
let me know
-
... The Mug of Eternal Peril . . .

I really like your homemade reincarnations John

Wish I had these handcraft skills to do this for my own.Today on top of my caf is the rescaled GAK.
Thanks . . . swapping back layer tools, drilling out that pin and replacing it with a new one isn't that difficult. I do recommend using a drill press, but it doesn't need to be a big, fancy one. A small table version works just as well, and it's much more controllable for drilling the heads off of the factory pins than a hand drill. Also, building a simple fixture to hold the knife with the cutout side up (Phillips or corkscrew) with a bock of wood helps immensely and isn't that difficult either. The rest is all modest hand tools and a small vise with an anvil on the back, which most I've seen have.
Finished the metamorphosis of Apprentice #4 and Spartan #2 this afternoon, with their initiation over The Mug of Eternal Peril together prior to installing the scales.

I have an older B&H GAK . . . they're nicely made and very sturdy . . . the combo saw with openers and flat tip screwdriver takes a little getting used to, but it works.
John
-
Today . . . the Apprentice Quadrilogy over The Mug of Eternal Peril!

If you look closely, you can see the beads of sweat forming on the first (nearest). Just the slightest slip, and they all know it.
John
-
@jalind said:
Today . . . the Apprentice Quadrilogy over The Mug of Eternal Peril!
If you look closely, you can see the beads of sweat forming on the first (nearest). Just the slightest slip, and they all know it.
John
John, you've taken the thread to the next level. The only way you could top this is with 5 (yes 5) Apprenti (plural of Apprentice probably) maybe with the coffee a tad hotter? Great stuff anyway

-
Today . . . the Apprentice Quadrilogy over The Mug of Eternal Peril!

If you look closely, you can see the beads of sweat forming on the first (nearest). Just the slightest slip, and they all know it.
John
John, you've taken the thread to the next level. The only way you could top this is with 5 (yes 5) Apprenti (plural of Apprentice probably) maybe with the coffee a tad hotter? Great stuff anyway

I've got a few more Tinkers queued up to become Spartans but need more Waiters to volunteer. Working on finding some.
Thanks!
John
-
The two Tinkers reborn as Spartans (from the Apprentice mods) and their Spartan Saturday initiation into the Danger Club, breaking out into a sweat over The Mug of Eternal Peril.

-
Swapped a 58mm split ring onto the cadet, seems like a better fit to me.

-
@BerkshireHunter said:
Swapped a 58mm split ring onto the cadet, seems like a better fit to me.

I've put smaller Split rings on a few of my saks and I prefer them too[emoji1303]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


