Gerber Episodes.
-
Episode 21 - Gerber Myth Archery Tool
Part of the Myth line of hunting gear by Gerber, the Myth Archery Tool is something a little different in the Gerber product lineup. This tool was first introduced in 2013 with product reaching the market towards the later part of 2013 and early 2014.
What also makes the Myth Archery Tool a little unique is the forbearance of a set of pliers for an adjustable wrench. Adjustable wrench multi-tools are not as common as plier based multi-tools.
Because this is aimed squarely at the archer, you do get a few hex keys with a Phillips and flat driver.
On the back side, are two little paddles that when depressed will aid in extracting those Hex keys.
A closer look at that smooth jawed adjustable wrench.
On the back, is a nifty broad head wrench.
The Gerber Myth Archery Tool is a specific tool for a specific market. It is a little unique in the world of multi-tools as it is based around a smooth surfaced adjustable wrench. There are other archery specific tools out there by other companies, and most of them are pliers based.
-
Episode 22 - Gerber Myth Shotgun Tool
This squarish tool came out the same time as the Myth Archery Tool. It is also part of the same Myth family, which also contains numerous knife blades, and other hunting accessories. The colour scheme for the Myth series is a muddy brown with a black rubber surface on some parts.
A top view of the back showing the large sliding tool lock lever.
A top view of the bottom. Note the black housing on the left that houses a 1 foot spring retractable measuring tape.
The Myth Shotgun tool does offer a nice sized knife blade, along with a saw, a dis assembly punch pin, and a universal shotgun choke wrench. The tool also has a measuring tape.
Looking at the back of the tool, the measuring tape.
Another Myth product for the hunting market segment, the Shotgun Tool offers a lot in a boxy package.
-
Episode 23 - Gerber Eclipse
Gerber's parent company is Fiskars. Fiskars is well known for their scissors. In 2003, Gerber produced a little key-chain scissors based multitool. That model is the Solstice.
The handles rotate around a pivot point. When closed, they physically keep the spring loaded scissors closed. There is also a small circular cutout in the base of the scissors for a keyring.
Note that the blade is stamped Taiwan.
The Eclipse reminds me of several older designs that are larger than this one, but are pliers based and not made by Gerber. This type of design, with rotating handles, is always a little fiddly.
-
Episode 24 - Gerber Solstice
The following year, 2004, the Gerber Solstice came out. Now if I thought the Eclipse was fiddly, the Solstice takes that to a whole new level. Much like the Eclipse, the Stolstice's handles rotate around a pivot point. They also keep the spring loaded scissors closed. Opening them is a little tricky as the scissors tend to want to jump open once the handles go past a certain point. Worse yet, there are two extra folding tools that tend to get in the way.
Does this tool resemble Swiss+Tech gear? Yes it most certainly does when looking at that flat and Phillips drivers at the end of each arm.
The two fold out tools are a bottle opener and can opener. They tend to get in the way when trying to deploy the scissors. At least there are ledges inside each handle that prevents these tools from rotating past the horizon...so they will only rotate in one direction from rest. That helps in keeping down the handful that this tool's design represents.
You can use a keyring much like the Eclipse, or you can run a lanyard through that hole in one of the handles.
I have a soft spot for this tool as it was the first Gerber I ever bought. A local store placed these on a clearance shelf. I didn't pay much for it. I gather the Eclipse and Solstice didn't sell very well as there are no successors to this line. However, as we will see in the next episode, the flame didn't die on the scissors based multi-tool...it just took a different form...or should I say, a pair of forms.
-
Episode 25 - Gerber Shortcut and Clutch
Introduced in 2005, the Gerber Clutch and Shortcut are keychain sized multi-tools that ushered in a concept at Gerber. The introduction of two models, one with scissors and one with pliers.
The Shortcut is the scissors bearing member of this duo.
For their size, these have a nice feature set.
The Gerber Clutch is the pliers based version of this duo.
Thus the torch of the Eclipse and Solstice was passed onto the Shortcut. However, you can also get the Clutch...having the option of either pliers or scissors...that made perfect sense.
-
Episode 26 - Gerber Splice and Vice
The Gerber Shortcut and Clutch held the fort until 2009, when the Gerber Splice and Vice were introduced. These are a little smaller than their predecessors.
My copy of the Splice is pink, but they came in different colours. As you can guess, the Splice bears scissors.
These are spring loaded much like the older Shortcut.
The tool load-out did change. For one thing, the file got a lot smaller and is now the side of the flat Phillips driver. You do gain a serrated blade. The bottle opener is improved via a wider cap lifter (there is also a flat driver affixed to one side of the cap lifter).
The Gerber Vice is the pliers based version.
Not much more to say about these. They are slightly smaller than their predecessor and offer slightly different functionality.
-
Another great bunch of reviews Chako
You have been working overtime to have made all of these :o :D -
Episode 27 - Gerber Curve
Introduced in 2009, the Gerber Curve is a very small and compact key-chain multi-tool. The Gerber Curve also does not have pliers, much like the older Gerber Multi-Lite.
The Gerber Curve offers a combo bottle opener/carabiner on the tail end, a knife blade, large and small flat head driver, and a Phillips driver. All the tool lock.
Top down view.
And on the other side.
The Curve is very small and wouldn't be a chore to carry on your key-chain.
-
Thanks Poncho65, on a short holiday...and this is keeping me busy.

-
Episode 28 - Gerber Nautilus
I could not nail the release date of the Gerber Nautilus...so if I had to guess, I would say early to mid 2000's. I am hedging more towards 2003/2004 for a release date from what I could find online.
Irrespective, the Gerber Nautilus is an odder duck from a company that likes to make odd ducks. Called the Nautiolus due to its oddly nautical shape, the tool features a spring loaded LED flashlight. The flashlight has 4 functions. press the button once, and the front LED will light up. Press it a second time and the front will turn off and the bottom LED will light. Press is a third time and both will turn on. Press it a forth time and the bottom will turn off and the front will strobe. Press it once more, and all will shut off.
Someone online called the Nautilus..."the shrimp". I kind of like that.
The backside doesn't have much to see.
The other side is more visual. That button that sticks out on the left top side, released the spring loaded flashlight.
On tap is a nice sized blade, a combo bottle opener/flat head driver, a Phillips driver, and a unique designed pair of Fiskars scissors. Unique in that the handle has a little finger loop. A loop that is too small for my big fingers I may add, but it is visually striking. on the opposite end is the LED flashlight housing.
All the tools lock via these locking levers.
On the opposite end is the LED flashlight release button, and the on/off button on the flashlight housing (blue oval).
The Nautilus is strange. The Curved body is very stylish, but it comes at the cost of comfort, especially with those with big hands. The LED flashlight is ok...but more modern LEDs are far brighter than they are on this now discontinued tool.
-
Episode 29 - Gerber Shard and Artifact
Released in 2008, the Gerber Shard is a very nice OPT (One Piece Tool). It offers a Phillips driver, a bottle opener, a lanyard hole, and a mini pry bar/nail puller. The pry bar section is slightly curved for ease of use and practicality.
My copy has multitool.org etched onto the back side.
Next up its the Shards larger cousin, the Artifact. Beyond what the Shard offers, the Artifact also gives you an X-Acto blade which rotates around a pivot point.
The removable blade locks via a liner lock on the body.
Both the Gerber Shard and Artifact are nice little tools. The Artifact is slightly larger than the Shard, but also offers an X-Acto blade.
-
Episode 30 - Gerber Guardian One Piece Tool
I do not have much on this particular tool other than it came with a small folding knife. I do think the Guardian line is either a Fiskars econo line, or a Gerber econo line. I am not sure which. Either way, it does belong here as it is under the Fiskars company umbrella.
Not much to say about this...so I will let the photo do most of the talking.
-
Episode 31 - Gerber Dime and Gerber Dime Travel
The successor to the Gerber Vice and Splice, the Gerber Dime came out in 2012.
The bottle opener is a little odd in that it sticks out of one end of the multi-tool. it also doubles at a lanyard attachment point.
Unlike the older models, the Dime is offers as only a pliers model. They are spring loaded at that.
The Gerber Dime has the same Phillips/file combo seen in the Vice and Splice. It also offers scissors, a knife blade, flat driver, bottle opener, and a package opening blade.
There is a variation of the Dime, called the Dime Travel.
The Dime Travel exchanges all the not allowed at an airport knife and package blade for a file and hook.
The Dime has had its fair share of quality control issues. On the other hand, the Dime does offer a lot in a small package in regards to packing scissors in such a small package.
-
Episode 32 - Gerber Suspension Family
First introduced in 2005, the Gerber Suspension and the tools based on that design represented for a long time, Gerber's value priced line. Many of the models were sold at different stores. In fact, many of these were designed to certain store chain specs. Either way, the Suspension is the forefather of the lineup and is the tool that all the others were based upon. All in this family for the exception of one model, are carbon copies of the Suspension, differing only in the looks of the handles. The Tread is the sole exception...but more on that later.
Gerber Suspension
The Suspension has a bad reputation for its low brow construction, but it was a good seller. It is in fact not that bad at all. You will note the general shape that I consider is the General Chinese multi-tool shape such as those produced by Ganzo. However, the Gerbers feature locking tool sets.
Gerber Method
Released in 2007, the Gerber Method is nothing more than a re-badged Suspension.
Gerber Ripstop
Another Suspension Clone that came out in 2007.
Gerber Evo
You get the picture.
Gerber Resolve
Gerber Crux
There are two variations of the Crux. The regular black version, and a blue which was an exclusive of an American store chain.
Gerber Bear Grylls Ultimate Multi-tool
Yes, even this is a Suspension in disguise.
Gerber Tread
Of the series, this is the only unique model that differs from the Suspension. The Tread has a built in LED flashlight in one handle which is turned on and off via a sliding switch that mimics the sliding tool lock lever on the other handle.
The Tread has a sheepsfoot blade, a pair of Fiskars scissors, a flat head driver, and Philips driver. The LED flashlight takes up the other handle.
Overall, these aren't that bad. They do have a bad reputation because they represent a no frills basic design, one that is very popular in generic multi-tools the world over. They do suffer from being bulky for their size. They are economical models, but honest ones that offer locking tools...something that most generic multi-tools of the same general shape do not offer.
-
Amazing collection there Chako
What do you do with all the boxes and pouches?
All mine are kept in both their pouch and box simply because I wouldn't remember the pouch/model combination
-
I have two separate storage areas. I keep the sheaths mostly in with the boxes, which usually have the model number on them.
-
Wow, Chako has probably surpassed himself with this Gerber Episodes series

There's a small problem though: almost no-one reads the stickies ::) :-\
-
@firiki said:
Wow, Chako has probably surpassed himself with this Gerber Episodes series
There's a small problem though: almost no-one reads the stickies ::) :-\
Have to agree on the sticky point - this is the first time I've ever replied to a thread once it's been made sticky - it's almost like they become invisible!!
-
Great series of reviews and overviews! Exactly what I wanted to see when I saw your collection in that other topic. Great job!
-
Episode 33 - Gerber Strata
First introduced in 2010, the Gerber Strata is a buttery fly opening mulit-tool. This tool is very popular and it does have a lot going for it. However, I have had one issue with this tool that in my mind, makes this a somewhat dangerous tool in a special circumstance. The first time I attempted to close the scissors, I thought I had folded the scissors fully to stow it away, I was a little distracted and the scissors snapped close fooling me into thinking I could then palm the handles closed. I was wrong and nearly punctured my palm. I am in the minority on this, but I think a little re-design would fix this issue. I even created a little video for you to understand what I am saying here.
https://www.youtube.com/watch?v=MoPB1r2sRaU&feature=youtu.be
Unfortunately, the Bear Grylls model exhibits the same issue. It is rare when such an issue does come up in a multi-tool design that makes it to the public...so to me, this was worthy of notice. On the other hand, plenty of folks have used and loved their Strata with nary an issue. My point is to be just aware of the danger. It is an easy one to mitigate.
The Strata does have nice clean lines.
Removable carbide cutters, and a nice tool load-out rounds out what the Strata has to offer.
The Bear Grylls version is officially called "The Bear Grylls Survival Tool Pack". This is basically a Strata dressed up in BG livery. One thing I do like about the BG version over the Strata, the locking levers use soft rubber which makes them a lot easier to operate without slipping off a finger or thumb. The Bear Grylls Survial Tool Pack comes with a nice soft rubber/hard plastic sheath, a flashlight, and fire-steel.
I do like the Strata. If you are not me, you will be fine for the most part. I mean, the issue I found was due to my inattentiveness. So do not let me dissuade you into getting the Strata.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







































































