And so it begins.... (My adventures into Alox!)
-
Almost!! :)
/topic/64990
-
@captain spaulding said:
What does it weigh in at? Looks hefty.
I think the weight is around.... to cool to matter. :D
This.
-
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scales
-
@OHIO said:
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scalesI just use cheap ones. I used to buy the 15 dolar ones but breaking those is much more sad then 2 dollar ones.
Tapping Ti is easy if you make the right size hole. You use a much larger one than in aluminium. Basically measure the OD of the tap and then subtract 0.005 to 0.010 and that is plenty of thread in Ti. Also you have to start and backnit off alot. Once you are putting alot of torque on that tap it will snap. Tapered taps are a must too.
-
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scales
I just use cheap ones. I used to buy the 15 dolar ones but breaking those is much more sad then 2 dollar ones.
Tapping Ti is easy if you make the right size hole. You use a much larger one than in aluminium. Basically measure the OD of the tap and then subtract 0.005 to 0.010 and that is plenty of thread in Ti. Also you have to start and backnit off alot. Once you are putting alot of torque on that tap it will snap. Tapered taps are a must too.
Yeah. I used a #51, which is what it called for. I knew I should have used a 50 or 49 but 2 late now. I haven't tried digging it out yet. I just can't believe it snapped on aluminum. Definitely won't buy that brand again.
-
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scales
I just use cheap ones. I used to buy the 15 dolar ones but breaking those is much more sad then 2 dollar ones.
Tapping Ti is easy if you make the right size hole. You use a much larger one than in aluminium. Basically measure the OD of the tap and then subtract 0.005 to 0.010 and that is plenty of thread in Ti. Also you have to start and backnit off alot. Once you are putting alot of torque on that tap it will snap. Tapered taps are a must too.
Yeah. I used a #51, which is what it called for. I knew I should have used a 50 or 49 but 2 late now. I haven't tried digging it out yet. I just can't believe it snapped on aluminum. Definitely won't buy that brand again.
I was able to get the broken tap out.
Yaaaaaay! -
What brand of tap are folks using for titanium? The one I used for my alox scale snapped when I was in the process of adding a pocket clip so it'll now be used as a template moving forward for titanium scales
I just use cheap ones. I used to buy the 15 dolar ones but breaking those is much more sad then 2 dollar ones.
Tapping Ti is easy if you make the right size hole. You use a much larger one than in aluminium. Basically measure the OD of the tap and then subtract 0.005 to 0.010 and that is plenty of thread in Ti. Also you have to start and backnit off alot. Once you are putting alot of torque on that tap it will snap. Tapered taps are a must too.
Yeah. I used a #51, which is what it called for. I knew I should have used a 50 or 49 but 2 late now. I haven't tried digging it out yet. I just can't believe it snapped on aluminum. Definitely won't buy that brand again.
I was able to get the broken tap out.
Yaaaaaay!
Ya its a total pain to get them out. In Ti at least there is the option to just use a strong acid and dissolve the tap, and it wont effect the Ti.
-
I have been building mostly standard models the last week, super tinkers and such so I havent posted all of them.
This one though is pretty far from being standard. :D One wrench cutout is for metric, the other imperial.










-
Nice one!
Sent from my SM-G920R4 using Tapatalk
-
That is one amazing cybertool. Love the wrench scales, and the electrician blade is a great idea...wish I'd thought of that before you modded my cybertool. The Wenger wrench is also very useful.
Beautiful work.
I'm loving my cybertool - can't say enough about how much I enjoy your work.
-
I really like this setup for a 2 layer. After fidding around enough now with the awl on back of scissors spring and trying enough things this is what is needed to be done to get it to work.
- Bend scissors spring a couple degrees up at the point of contact with scissors as it is too weak otherwise.
- Round the back of the awl just a little bit to make it easier to open. If not its not possible to open with human fingernails. :D



-
Love it! What's the overall thickness of the whole setup, Bob?
-
-
Love it! What's the overall thickness of the whole setup, Bob?
That one would be 0.440" or 11.1 mm
Nice. My Compact Tinker Mod with the same tools in Cellidor measures 14.5mm. That's quite a difference. Also, I guess the Phillips in a steel pivot between Ti scales can endure MUCH more torque.
-
Love it! What's the overall thickness of the whole setup, Bob?
That one would be 0.440" or 11.1 mm
Nice. My Compact Tinker Mod with the same tools in Cellidor measures 14.5mm. That's quite a difference. Also, I guess the Phillips in a steel pivot between Ti scales can endure MUCH more torque.
For sure. Someday I'll test how much force it takes to fail, but its gotta be alot more than brass rod between aluminum liners.
-
The best part is no key ring.

-
These are amazing. That Cybertool is ingenious! I could never come up with that tool combo if I had to tell you what I wanted.
--
Sent from mobile, please excuse typos -
I put some more effort into standardizing the large bottle opener from the pioneer opposite the mag glass layer and made up a bunch. Its does need quite alot of re-shaping but it works nicely. The only con is you lose the wire stripper.
Pretty unique toolset though. :D







Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login