Going Buck Wild.
-
I first became aware of the existence of this knife several months ago.It was called a "Buck Rattler".You'll understand the reason for its title when you view the pictures.
I only read a description and unfortunately the poster had no pictures but it sounded so interesting that I searched for it on the internet.I was only able to locate one but it had already been sold.The selling price was two hundred dollars but that was of little help in establishing current value because the date of the sale wasn't listed on this particular website.
Then one came up for sale on March first and was scheduled to end ten days later.Since I wasn't sure of the value,I was hesitant to bid too high.I was fortunate that my final bid was enough to win and well under the sale price of the one I had previously located.
Two days after this Buck was delivered another Rattler came up for sale with a "buy it now" listing.I discovered it just a few minutes after the seller listed it.I almost bought it because all collectors know one fact about cool knives and that is "one is good but two are better".LOL.I then thought about the other buyers who missed out on the one I bought and I let it alone.Sure enough, just a few hours later it was sold.
This knife was produced in 1984 making this Buck 32 years old and NIB.It was also made in small numbers,just 300, compared to other limited edition knives manufacture by Buck.It's also one of only four Buck 112 Rangers that I've seen with stag handles.The serial number is also very cool 030/300.
-
Awesome! I have a commemorate I need to bring out. I have not seen it since the move. I think I may get it now.
-
Just pulled it out and got some pics. Its prettier than I remember.

-
This is one I think I only posted on the forum once and it was a while back and a crappy picture. Thank you for leading me to go get it out of storage and get it some sunlight. Its the 50th anniversary from 1987.


























-
That's a beauty.That's the 110 Hunter DU Commemorative knife !
I didn't even know they made a 110 version of the DU knife,congrats.
I posted a picture of my 112 DU commemorative in reply 71 & 73 but it didn't come with a such a cool display case as yours Cap't.
-
Every purchase is accompanied by a story and this knife is no different.It's nothing special just mildly interesting.As per my daily routine I check ebay for new listings for Buck knives.I saw this knife was just listed so I checked the photos and the sellers description and became very interested.Firstly it was almost two decades old and was NIB.Secondly it was manufactured with a nickel silver frame and was devoid of visible scale pins and a rocker pin.Thirdly the seller claimed the scales were made from Fibron,a material of which I was unfamiliar.
I originally thought this Fibron material may be some lightweight synthetic material,at least I was hopeful.After talking to a representative of Buck knife company,I was informed this was a material similar to the Dymondwood they use now except it was supplied by a different company.In any event,the knife was very attractive and presented a clean uncluttered appearance.I made my bid and was rewarded with the purchase.
Several days later the same seller placed two more Bucks for sale,which he also listed as having Fibron scales,although he misspelled the name as Fiberon.These new listings were ten years older and both were the finger groove configuration although they had brass frames.I thought one of the two listed would be worthy of inclusion into my burgeoning collection of Bucks so I kept a close eye on the one listing and watched two bidders butting heads for the win.I decided to sit this one out and watched the bidding rise to twice the price of the item I had won.This may sound trite but you win some and you lose some.LOL.
Here is the newest addition to my collection of Buck knives.As mentioned earlier, it has a nickel silver frame,black Fibron scales and no visible scale pins or a rocker pin.
-
More great Bucks and interesting stories also TG!
Nice DU 50th Anniversarity Capt..
-
The two that I own are both 112 Ranger models. I believe the 110 Hunter model,such as yours,may have a similar value.I can only hazard a guess at perhaps $125.00-$150.00.
-
Thanks.
-
This post isn't about a knife but a source of information on a knife.That knife is the Buck 184,otherwise known as the BuckMaster.When this knife was introduced it immediately created a stir in the knife community.I was able to view this knife in a current publication at the time which was the 1980's.I immediately thought this would be a cool knife to own.Every time I set out to buy the new BuckMaster something else came up for sale and I succumb to "one in the hand is worth more than two in the bush" syndrome.
During the next several years I added many more knives to my collection including two Chris Reeve knives,which were a one piece design with a hollow handle ans similar to the Buck.Reeve was operating from his home in the nation of South Africa.Unfortunately the BuckMaster was relegated to the back burner and eventually fell from my must have list.
Time has a way of coming full circle and I am now interested,once again,in buying one of these knives.I never thought this would be so complex until I was made aware that there were so many variations and hence the need to purchase this book.
This is the definitive source of information on this knife.Buck collaborated with Phrobis Ltd. and together they researched and developed the Buckmaster.This endeavor was intended to create a knife for the military,specifically the Navy Seals.This is the only fully authorized history of the BuckMaster and I'm looking forward to reading and sharing information about this iconic knife.

-
@toolguy said:
This post isn't about a knife but a source of information on a knife.That knife is the Buck 184,otherwise known as the BuckMaster.When this knife was introduced it immediately created a stir in the knife community.I was able to view this knife in a current publication at the time which was the 1980's.I immediately thought this would be a cool knife to own.Every time I set out to buy the new BuckMaster something else came up for sale and I succumb to "one in the hand is worth more than two in the bush" syndrome.During the next several years I added many more knives to my collection including two Chris Reeve knives,which were a one piece design with a hollow handle ans similar to the Buck.Reeve was operating from his home in the nation of South Africa.Unfortunately the BuckMaster was relegated to the back burner and eventually fell from my must have list.
Time has a way of coming full circle and I am now interested,once again,in buying one of these knives.I never thought this would be so complex until I was made aware that there were so many variations and hence the need to purchase this book.
This is the definitive source of information on this knife.Buck collaborated with Phrobis Ltd. and together they researched and developed the Buckmaster.This endeavor was intended to create a knife for the military,specifically the Navy Seals.This is the only fully authorized history of the BuckMaster and I'm looking forward to reading and sharing information about this iconic knife.
Once again, toolguy your Buck knife collection is impressive. The stag rattler 112 is nice, I do not recall seeing one like that before.
Rich Neyman the author of "BuckMaster Knives" is a personal friend of mine. His book is very informative, and a thorough history of the BuckMaster. Anyone interested in the BuckMaster should own this book.
This is the BuckMaster knife Rich gave me as a gift.
-
@THE_LONGBOW said:
Once again, toolguy your Buck knife collection is impressive.
The stag rattler 112 is nice, I do not recall seeing one like that before.Rich Neyman the author of "BuckMaster Knives" is a personal friend of mine. His book is very informative, and a thorough history of the BuckMaster. Anyone interested in the BuckMaster should own this book.
This is the BuckMaster knife Rich gave me as a gift.LB that's so very cool! Congratulations.
With Rich's book I'm able to determine that your BuckMaster is variation #4 that was produced 1986,which is the first year that Buck initiated a yearly date code and the second year of production for the BuckMaster.
I was up late last night reading to page 120 with only 232 pages to go.With this extraordinarily well documented book I now feel confident that I will be able to make an informed purchase.
If you have the opportunity,please tell Rich that I thank him for writing such a wonderful book.
-
Here is something that just arrived in the mail.
What is it ?
Hint,it's a Buck but it's not a knife !
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
-
Another round of great knives. I really like the anniversary/commemorative ones and the rattler is very very nice.
Thanks brother.
No guess as to what's in the Buck sheath?
Steelmaster :)
Yes it's a Buck SteelMaster.I was hoping the #137 showed well enough to read it.
These were made between 1974 to 1990.They often show up on ebay and are well made.This is a sharpening steel that is housed inside of a steel case.You use it by releasing the lever and then sliding the sharpening steel out and then return the lever to its original position.In this configuration the sharpening steel is locked into its position and the case acts as the handle.
Here it is outside of its sheath and you may have noticed the sheath is stitched only on one side.
I would have never guessed that
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login