Modding station
-
@sLaughterMed said:
For modding my workbench is my dining room table, or the balcony table if it is nice out.I use a Dremel clone (cheapo borrowed from my father), large hammer (anvil), clamps (to hold down my "anvil"), smaller ball peen hammer (peening), 8v cordless drill with standard Imperial bits, and Rebar (file & drivers). I also own a set of loki-mobile's Leatherman Modding Wrenches, and a set of security torx bits. These items cover everything I need for SAK, SOG, Leatherman & Gerber modding.
While far from capable of doing what Syph007 does, I can do probably 80% of it, with very good results.
I do wish I could drill out pivot holes (really requires a decent drill press and good drill bits), making custom scales (needs belt sander & Band saw) and Blunting Leatherman & SOG tools (needs Angle Grinder & vice, or bench grinder). But there is still quite a lot that can be done with pretty basic and standard hand tools.
I do not agree, a lot of the things you mention can be done with handtools and a Dremel. These scales started as a smal teak tray. Handplane to get it to the right thickness. Crude shaping with a fretsaw. A sharpened streetsweeper steel brush for the tweezer nick. Dremel for rivet holes. Fine shaping with some needlefiles and 2 grits of sandpaper.
It would be a lot easier with belt sander and band saw though. To make bluntnosed tools you cloud easily do the bulk cutting with a Dremel and then file/sand it. There's really no good way around a drill press for rivet holes though.
-
As for my own workstation, i posted it in my Challenge topic. i'm in an apartment so there isn't any space for a dedicated bench. Instead I routed a slot for a cutting mat in a slab of wood and attached an old suction vice (the rubber was old and dry and didn't work any more). I'm considering a couple of improvements including a lamp, the hanger for using the Dremel flex-axis and possibly some solution for turning it into a glove-box to avoid spreading dust around the apartment if I use the Dremel.

-
-
The power tools I use daily and couldn't work without would be...
-
Drill press
-
Belt grinders. A 4x36 for surface work, and a 1x30 for shaping. Both will be replaced by a single 2x72 KMG this year as both are on their last legs and under powered. KMG :D (http://www.beaumontmetalworks.com/shop/category.aspx?catid=3)
-
Dual wheel bench grinder, one wheel for deburring, other wheel is hard felt for polishing.
Lots of hand tools too jewelers saw, manual nibbler, hammers, files and lots and lots of sandpaper. :D
My shop is going to get a proper remake and do-over when I get the Tormach. I need to put the dirty tools on one side and partition that off from the clean side.
My wishlist still has an evenheat heat treat oven on it too. Oh and a bandsaw would be handy, but I can cut most small things just fine with a jewelers saw and the right blades.
-
-
Creativity, imagination and to a point talent are mostly what you need.
People are overthinking it these days. Complexity stifles ideas and creativity.
My basic setup is similar to Zoidberg's, except that I use portable fold-able bench as a base. Vice is sitting on a separate 2x4 which I insert in the middle of the bench and tighten. Files, selection of sand papers of different grit and an dremel-like rotary tool is most you need. Other tools if you need them should already be in your garage toolbox anyway.
All of my mods and custom creations I posted here came from that bench, or a kitchen table when wife isn't around 8)
-
@babola said:
Creativity, imagination and to a point talent are mostly what you need.
And a big bunch of hammers >:D:D
I’m spoilt as I have a nice big workbench in my garage
Here it is after a tidy (it’s not this clean right now :-[ )
My metal vice is also mounted on a board and fits in the wood vice
I also have a pillar drill, belt sanders and grinders on a bench to the right -
Howdy folks I'm new to the site and I was browsing your very interesting topics. I came across something in this thread that caught my attention. There was mention of loki-mobile's leatherman modding wrenches. How/where can I find out more about Leatherman modding wrenches? ???
-
@texunjohn said:
Howdy folks I'm new to the site and I was browsing your very interesting topics. I came across something in this thread that caught my attention. There was mention of loki-mobile's leatherman modding wrenches. How/where can I find out more about Leatherman modding wrenches? ???I see you have found the sale thread already. Just send loki a PM, he'll help you with the rest. Looking forward to seeing your handy work.
-
Yep, I kept searching until I found enough info to act on. I sent my order and PayPal payment this morning. Thanks!
-
Mine's a mess:

2 small (1m x 0.5m or thereabouts) kitchen units. The left hand one is my 'clean' bench with a 3" vice, the right dirty with belt sander and pillar drill. Dremel, saws and spotlights on the shelves above the benches, tools and parts over to the right hand side.I've got an offcut of oak kitchen worktop that I need to make a new bench out of, and I need to reorganize my toolbox and parts stores. Got too much gardening stuff in the shed at the moment too - lawnmower and other tools - that need to come out.
-
That is a really nice looking set up.
-
-
Tidy and light H

-
@hiraethus said:
Mine's a mess:

2 small (1m x 0.5m or thereabouts) kitchen units. The left hand one is my 'clean' bench with a 3" vice, the right dirty with belt sander and pillar drill. Dremel, saws and spotlights on the shelves above the benches, tools and parts over to the right hand side.I've got an offcut of oak kitchen worktop that I need to make a new bench out of, and I need to reorganize my toolbox and parts stores. Got too much gardening stuff in the shed at the moment too - lawnmower and other tools - that need to come out.
Thats a nice space you have there. That isnt messy though, looks tidy. Messy is what I work in. :D Im always trying to get something done and never get around to tidying and cleaning.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






