What Multi tool should I get???
-
Another Surge fan. One of the best and toughest multis out there.
That's us mobile
-
Welcome aboard.
short answer all of them. 
Wave, Surge, mp600, Spirit, Powerlock.......this list can get long
because of your work maybe a super tool 300. Good luck on your hunt. And 
-
Welcome to the forum.

I would also suggest the Leatherman Surge.
-
I guess I would go with the LM Surge or a Vic Swisstool X
Both are of the bigger variety and if you would want to go to the mid sized range without sacrificing anything really then LM Wave or Charge TTi(most expensive because of the titanium scales) or Vic Swisstool Spirit X
Any of these tools will deal with a great amount of use and give you plenty of option and probably the most bang for your buck 
-
Owe and welcome to the forum

-
Option 1: Leatherman Wave + bit extender + bit kit (has Robertson as well).
Option 2: Victorinox Spirit.I don't like swisstools scissors. Spirit is better and way more comfortable.
Surge is heavy. -
I missed the part about scissors. Go with a surge.

-
Another option would be the SOG Power LOCK S-60 with scissors. Compound leverage for grip and cutting power, scissors or V cutter, and easily replaceable parts that SOG sells so you don't have to go begging around for someone else's left over parts.
-
IMO don't let scissors be the deciding factor when picking a MT. You can always add a SAK to your pocket which has terrific scissors across all sizes.
As far as clam packages the cut/picker blade used in 58mm SAKs is a beast when opening those or the orange peeler blade found on 74mm models.
Ok now thats out the way,
Rebar, this tool is feature rich. Lots of interior tools to get you through a day.
Wave, IMO this is the top dog. Lots of options when adding the bit kit or just the bit extender. Using the bit extender alone allows you to use any 1/4" bit you currently have.
Surge, this is next level tool. All the greatness found in the Wave but on steroids. Adds the blade exchanger which allow you to add in a variety of cutting blades. Wood saw only is nice but having a hack saw is nicer. Unlike the Wave if you wear out your file just buy a new one.
Swisstool, Beast mode in a classy design. There really is nothing like this tool. It may not have the versatility of the Surge but it doesn't need to. Get the one with scissors if they mean deal breaker.
If you buy online from auctions sites you may be able to procure 2 of the above tools

-
Oh boy...This might be harder than I thought! How sturdy are the bit drivers on the leathermans? I seem to remember having a wave with one a long time ago that I ended up getting rid of more for financial reasons than anything to do with the tool. I like the look of the Victorinox, very classy! Definitely not a fan of the rivets though. Glad I have a couple months to decide! lol. Weight isn't a factor at all honestly. Well then! Thanks for all the replies and warm welcomes so far gents!
-
@Jedula said:
Oh boy...This might be harder than I thought! How sturdy are the bit drivers on the leathermans? I seem to remember having a wave with one a long time ago that I ended up getting rid of more for financial reasons than anything to do with the tool. I like the look of the Victorinox, very classy! Definitely not a fan of the rivets though. Glad I have a couple months to decide! lol. Weight isn't a factor at all honestly. Well then! Thanks for all the replies and warm welcomes so far gents!The MTO motto is to get both ;) or you your case all :D All the above choices are really good IMO and you could go with anyone of them and be happy
As Aloha said you can always add a SAK if you really need scissors (I carry a Rebar and a Vic Executive) the Vic covers the scissors and couple other things and the Rebar covers everything else also the bigger version of it is the Supertool 300 and it is a very hard to beat MT if you don't need scissors on it specifically 
-
You can also get a bit adapter that has the LM flat bits with it that goes over the square phillips and turns any of the LM that have the square shafted phillips (ex Rebar, Supertool 300, Blast, Fuse, Kick etc) into a bit driver

The bit kits and such are a big draw on LM as well on those that have the bit driver

-
Vic Executive for the WIN
. This little powerhouse is such a great compliment to any MT without scissors or with for that matter.Here are a few shots of the Surge, ST300, Wave, Swisstool X.
I didn't fan out all the internal tools sorry. I like the ST300 well enough and adding the adapter that slides over the phillips, wow now we are talking extended functionality.
Good luck and Welcome.



-
A LM ST300 paired with a Vic Compact can cover almost all your bases.
-
I am a welder and i use the swisstool X. I can bet on it that you will hear a lot of: swisstool, wave, spirit, surge etc... In fact those are all great tools that will do the job. In my opinion the Swisstool scissors are better than the leatherman scissors.
One thing you will only hear from a welder is that due to the swisstool's clean design it is pretty easy to get all the welding splatters of it. Believe me, after a couple of days your tool will be under the brown and rusty coloured splatters. On the swisstool's clean design you can easily pop those of with a chisel and a hammer.
Because i am a vic fan (who comes from leatherman) i would say go for the swisstool x or spirit x (x are model with scissors, great for daily use) depending on the weight and size you would need for your daily use make the desiscion between the spirit or regular swisstool.
Most people classify them as this:
Swisstool = belt carry in a sheath
spirit = pocket carryBut me personally i can easily carry my swisstool x in my jeans pocket.
-
Thanks for the helpful picture comparison! That bit extender for the philips looks pretty sweet! takes regular bits too I see, not just the flat ones. Is there any similar adapter for the swisstool spirits philips? I'd probably carry it on my belt regardless, pockets are usually pretty full due to the knife problem :P
-
Let me just add my favorite to the list, the Gerber MP600 Pro Scout. Real screwdrivers rather than bit drivers, though one is available for it. Excellent pliers, fantastic scissors, and built like a tank.
Welcome to the forum! 
-
Welcome to the forum! Pay no mind to the rest of the people here, they know that being Canadian is awesome and are just jealous! :P
I'd strongly suggest that whatever you decide to go with (and all of the above are great suggestions) that you buy from the US. The Canadian dollar is in pretty sad shape right now, but even so you are going to get a much better deal ordering online than buying anything at Canadian Tire, Home Depot or anywhere else locally. I don't know what your actual plan for buying was, but local is not the answer in this case.
Let me know if you need any help sourcing whatever tool you want and I'll see what I can do to help you find one at the right price.
Def
-
Lets not muck about. The Surge !!......! [emoji3]
-
Spirit

The small SD on the Spirit works for #2 square drive if not too much torque is needed, and the scissors are second only to the standard SAK ones IMHO, and better for push cuts as they don't fold backwards. I do some welding also and the pliers, file, and chisel all come in handy, and the cutters are fine for wire feed snips. Fair warning though, the Spirit has ruined me for any other MT. In all fairness, the Surge or Wave/Charge would be good choices too, but the quality and compactness of the Spirit is preferable (to me anyway). The only real choice would be standard or spearpoint blade (X model). ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



