Going Buck Wild.
-
Here is another sharpening device marketed by Buck.This is the HoneMaster #136 and it's very cool.This is not the first device of its kind but since it was sold by Buck I'll include it in this GBW thread.LOL.
-
Here is one of two more Stag/Damascus 110 Hunters that I received recently.
-
Toolguy
I remember that clamp on device
It was a fixture to keep the sharpening angle constant, if I recall correctly
It that product still offered by Buck ?
Keep 'em coming Bro
-
@Marcellus said:
Toolguy
I remember that clamp on device
It was a fixture to keep the sharpening angle constant, if I recall correctly
It that product still offered by Buck ?
Keep 'em coming BroThat's correct Marcellus.Unfortunately it isn't offered any longer but they appear on ebay occasionally.Here are four for sale now.
http://www.ebay.com/sch/i.html?_odkw=buck+112+knife&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xbuck+136+honemaster.TRS0&_nkw=buck+136+honemaster&_sacat=0I bought this one in my post for $20.00 on the bay.
-
Does anyone know how old this 301 is? I've read that the dating chart widely available online only applies to some and not all models? Is this a 1964-1972? Is it older than that because of the reverse tang stamps of "Buck"?
/Edit: I'm thinking its actually a 303 from ~1967


-
67 to 71 if it's a 301
67 to 72 if it's a 303
My estimate at this point
Master blade on the 303 is about 2 1/4 inches long ( exclude the tang)
301 is longerYou may have one of earlier knives that were made by Schrade under contract for Buck
Can you detect any pivot pin in either bolster ? That would help narrow it downUntil Buck started the date symbol in 1986 it is tricky to date this "300" series of knives
-
@Marcellus said:
67 to 71 if it's a 30167 to 72 if it's a 303
My estimate at this point
Master blade on the 303 is about 2 1/4 inches long ( exclude the tang)
301 is longerYou may have one of earlier knives that were made by Schrade under contract for Buck
Can you detect any pivot pin in either bolster ? That would help narrow it downUntil Buck started the date symbol in 1986 it is tricky to date this "300" series of knives
No pin on the bolsters, the "unrepairable" shrade contract. It's definitely a 303.
-
OK 67 to 72
Only the knives with BUCK on master blade only are a dated 1967, from my research on the 300 series
Your knife might have been mfg in 1967 during a transition period , but the secondary blades marked with
BUCK make it only a chanceAnyway, great find, the Schrade made BUCKS were not around that long, being replaced by
Camillus who made the 300 series until 1985
BUCK produced the series " in house" after thatHope that helps
-
Great info on the 300 series Bucks,Marcellus.I haven't had much experience with these.
Here's one for the Buck collectors.What model is this ?
The first picture is this model alone and the second picture shows it with the new model 119 with 5160 steel.

-
No tang stamp? It could be a heavily modified 119, possibly had a broken tip and ground down. The fuller groove is shorter than the other 119, which leads me to think it is not a Buck. It definitely is not a standard Buck model.
-
@THE_LONGBOW said:
No tang stamp? It could be a heavily modified 119, possibly had a broken tip and ground down. The fuller groove is shorter than the other 119, which leads me to think it is not a Buck. It definitely is not a standard Buck model.10 to 1 it's a knockoff...

-
@THE_LONGBOW said:
No tang stamp? It could be a heavily modified 119, possibly had a broken tip and ground down. The fuller groove is shorter than the other 119, which leads me to think it is not a Buck. It definitely is not a standard Buck model.The tang stamp is on the opposite side but if I displayed that in the photo,there would be no guessing as to the model.You are correct in assuming the blade was reground.It is a Buck and you're correct that it's not a standard model.
-
No tang stamp? It could be a heavily modified 119, possibly had a broken tip and ground down. The fuller groove is shorter than the other 119, which leads me to think it is not a Buck. It definitely is not a standard Buck model.
10 to 1 it's a knockoff...

It's not a knockoff.I've seen counterfeit Bucks but not of the traditional models such as this.
OK guys here is the skinny on this knife.It was crafted by Remer/Stone Knives.I thought I provided a hint by showing it with a Model 119 but that may have been more confusing because of the differences in the blood groove.It did begin life as a Buck 119 and was reground into a 5 1/4" drop point design.I thought this was clever and well executed re-purposing of a classic Buck knife.
Here is a link to the sale.http://www.ebay.com/itm/Customized-Buck-Knife-119-Special-by-Remer-Stone-Knives-2-/111737870909?hash=item1a04189a3d:g:FNEAAOSwjVVVxTRz
My Buck was originally produced in 1995 and the knife in the link was made in 2010.


-
Nice shape to the blade on that one

-
No tang stamp? It could be a heavily modified 119, possibly had a broken tip and ground down. The fuller groove is shorter than the other 119, which leads me to think it is not a Buck. It definitely is not a standard Buck model.
10 to 1 it's a knockoff...

It's not a knockoff.I've seen counterfeit Bucks but not of the traditional models such as this.
OK guys here is the skinny on this knife.It was crafted by Remer/Stone Knives.I thought I provided a hint by showing it with a Model 119 but that may have been more confusing because of the differences in the blood groove.It did begin life as a Buck 119 and was reground into a 5 1/4" drop point design.I thought this was clever and well executed re-purposing of a classic Buck knife.
Here is a link to the sale.http://www.ebay.com/itm/Customized-Buck-Knife-119-Special-by-Remer-Stone-Knives-2-/111737870909?hash=item1a04189a3d:g:FNEAAOSwjVVVxTRz
My Buck was originally produced in 1995 and the knife in the link was made in 2010.
Very interesting, Toolguy, thanks for the update...I stand corrected!

And yes, I do like the blade shape...quite nice.

-
Here are some recent pictures of one of my Buck Stag/Dam. 110 Hunter knives.
-
Another 110 Hunter Stag/Dam.
I need to take some lessons in photography as these knives look better in person than in my pitiful pics.LOL.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
