MINI
-
• Lanyard attachment? (Lanyard hole would be more appropriate)
-No• (Old) small diameter or (new) large diameter plier pivot?
-New• LEATHERMAN cast into plier pivot, along with USA or TOOL?
-Yes, Leatherman USA• A hard wire cutter notch?
-No• Handles stamped with what?
-Leatherman Mini Tool US Pat 4744272 Portland Or All on one handle• Inch ruler only, or inch/metric?
-Both inch and metric• Date codes? What are they?
-0395 and 0195• Knife blade markings?
-Leatherman USA• File?
-Normal I guess
In case I missed anything.






-
Thanks for the input

From the pics I can see it has a lanyard hole ;) I may need to reword my list to be a little more clear I guess

Also is your file matte finish or shiny? That is what I am after I guess
I really never paid attention that there was a difference until I put my two SS ones side by side
:DAgain thanks for the info and the pics

-
Pictures always speak better than words....for me at least
-
-
What a shame it's retired. Most minis on ebay don't ship to Australia. But I'm hopeful I'll get one.
-
@ReamerPunch said:
What a shame it's retired. Most minis on ebay don't ship to Australia. But I'm hopeful I'll get one.Indeed, BUT, keep an eye out on Gumtree. I found both mine in the last few weeks. One was near new and needed some sharpening - $10. The second one was slightly more worn and I got that one for the same price. I used it to do a mod on. I am still looking for pouches though.
Cheers,
Pete
-
My latest two:
Good condition one:
• Lanyard attachment? (Lanyard hole would be more appropriate): Yes
• (Old) small diameter or (new) large diameter plier pivot?: New Plier Head
• LEATHERMAN cast into plier pivot, along with USA or TOOL?: Leatherman and USA
• A hard wire cutter notch?: Yes
• Handles stamped with what?: Leatherman Mini Tool US PAT 47442725 Portland OR
• Inch ruler only, or inch/metric?: * Inch and Metric*
• Date codes? What are they?: 0998 and 0998
• Knife blade markings?: Leatherman USA
• File?: No markings, still newAverage Condition One: Removed the blade and added a PST large screw driver
• Lanyard attachment? (Lanyard hole would be more appropriate): Yes have one
• (Old) small diameter or (new) large diameter plier pivot?: Large diameter plier pivot
• LEATHERMAN cast into plier pivot, along with USA or TOOL?: Leatherman USA
• A hard wire cutter notch?: Yes
• Handles stamped with what?: Leatherman Mini Tool US PAT 4744272 Portland OR
• Inch ruler only, or inch/metric?: Ince and Metric
• Date codes? What are they?: 0798 and 0798
• Knife blade markings?: Leatherman USA
• File?: New, mattPete
-
Thanks for the info pietervn

Can't believe you got one for $10 :ahhh

Your two being right at the same age can you tell if there are any differences between the two?
-
Hey Poncho and LM Mini fans
I have just started looking into the Minitool - maybe more about that later :D
However I have a few questions/observations for you..-
Poncho - From looking around the forum (eg Loki's & Spoonrobots threads) it looks like the lanyard hole was on the mini right from the start - So maybe not worth putting this in the Mini chronology questions ??
-
Similarly it seems that the dual inch/metric ruler was on the Mini right from the start - Is this true ??
-
I see quite a few of you have put the large plier head as being on your Minis - I assume we mean the large plier head that came out in 2001 on the PSTs. Again from looking around the forum piccies - It looks to me like that wider plier head never made it onto the minis (nor the wee arrow for the hard wire notch).
Is this true ??
I could try some piccies later - If this is not clear
What say y'all??
Thanks -
-
@Huntsman said:
Hey Poncho and LM Mini fansI have just started looking into the Minitool - maybe more about that later :D
However I have a few questions/observations for you..-
Poncho - From looking around the forum (eg Loki's & Spoonrobots threads) it looks like the lanyard hole was on the mini right from the start - So maybe not worth putting this in the Mini chronology questions ??
-
Similarly it seems that the dual inch/metric ruler was on the Mini right from the start - Is this true ??
-
I see quite a few of you have put the large plier head as being on your Minis - I assume we mean the large plier head that came out in 2001 on the PSTs. Again from looking around the forum piccies - It looks to me like that wider plier head never made it onto the minis (nor the wee arrow for the hard wire notch).
Is this true ??
I could try some piccies later - If this is not clear
What say y'all??
ThanksYeah the lanyard hole is most likely in all models I am just hoping that a really early one might not have one :D I am thinking that the earliest models may have been as the PST and only had inches
I would have to go look on here to be sure though ;) The third question also is suppose to relate to some of the really early ones. It is about the plier pivot specifically not the plier head whether the pivot is smaller diameter or larger diameter similar to how the early PSTs are vs. some of he newer ones
Also I think before 1996 there wasn't a hard wire notch on the plier head either 
-
-
Looking through some threads and some pics of the :ahhh :ahhh :ahhh !!!MINI :ahhh :ahhh :ahhh I may have to revise my thoughts of the plier head pivot ::) I am now thinking that the larger diameter pivot is on all models and I was seeing just one side of some of the older ones :D My mistake and if someone happens to have a different pivot on a really old model you can make note of it but we can take it out of the list if you want
I am also thinking Huntsman was right about the inches/metric ruler as well so if anyone has one with only inches they can make note of it but until then we can leave that off the list as well :D -
Guess who found at NIB :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh at a hardware store yesterday?

Give up? :D
This guy
I went to check out an old hardware store about 40-45 mins from the house on Saturday and browsing through some of the locked up tools and knives I spotted it :ahhh :D I even haggled with them since I figured they had had it a while ;) I got 10% off so I was happy about that :D The first pic was fuzzy but I had everything put up before I checked them
So I decided to put it anyways ;) The box has a date of 2002 and the tool has a datecode of 0102 in both handles so this was one of the first tools inside this type of box with the 2002 date on it 
-
Going with a new format as suggested on page 1
• LEATHERMAN cast into plier pivot, along with USA or TOOL?: Leatherman and Tool
• A hard wire cutter notch?: Yes
• Handles stamped with what?: Leatherman Mini Tool US PAT 4744272 Portland OR both handles
• Date codes? What are they?: 0102 and 0102
• Knife blade markings?: Leatherman
• File markings and finish?: No markings matte finishIf you have a really old one then I would like pics of it ;) Also to see whether the really early ones all had the lanyard hole and if any of the early ones had inches only like the early PSTs. There have been pics of them without any markings if you have one of those I would love to see pics of that as well

-
I have what I believe is a quite old one.
Lanyard hole.
It has no date codes and nothing stamped on the outsides of the handles.
It does have both in and cm scales.
Leatherman and USA on both the pliers and the knife blade.
Matt file.
No hard wire cutter notch.
-
Thanks you PTRSAK
Love your pic of your :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh :D -
+1 Poncho....these are all awesome!

-
@Barry Rowland said:
+1 Poncho....these are all awesome!

The :ahhh :ahhh :ahhh !!!MINI :ahhh :ahhh :ahhh is quite the tool

-
Can't help but post these pics in more than a few threads
:D I now have one like the one PTRSAK posted above 


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




