My turn for some 111mm fun
-
First:
this (and teh other 111 mm threads of teh last days) are really interesting.
Second: I´m looking forward to the various mods
Third: No. you don´t need the metal saw. Send it over to me. ;)
I´d love a 3 layer (Linerlock blade, opener layer and saw, backside awl and Phillips)I´m going to try a simple "Sentinel Plus" with a blade and opener layer and no backside tools (or maybe the Awl only) as a first try.
-
This will be an interesting one.
Could you send it to me to test it out? ;) -
I did a test fit up on pins to see how it would work. Both locks worked fine and function was 100%. The problem was that when closed where the blade tip is, since the liner was reduced there the blade tip is a bit too exposed. I can just rib my finger and hit the tip and I dont liek that so much. So I ordered a sentinel to harvest that liner from and that should fill in the gap nicely.
Of course I could also cut custom Ti liners for each and make my own lockbars, but at this point Id rather just stick with stock liners. Thye are certainly heavy though, but making Ti ones would be a huge pain.
-
This is all very interesting but Victorinox's difference between liner and scale lock are annoying. :D
-
Yeah, they should have known that MTO members would want to mix and match the parts.

:D
-
@Nhoj said:
This is all very interesting but Victorinox's difference between liner and scale lock are annoying. :DYes its very strange, but completely analogous to the cellidor/alox thing. The beefy version of the 91mm is the 93mm and it doesn't have scissors.
The beefier version of the 111mm is the liner lock, and it doesn't have scissors. Maybe both versions were designed for military and they never need scissors?
I dont mind having to drill out a few layers to metric sized for a couple mods, but it would be nice to not have to. This isnt something I think Id be doing alot of anyhow since buying donors would be crazy expensive. Im only doing this out of curiosity and to get a perfect for me EDC knife.
I will make 2 version though, one with scissors added only, and one with pliers and scissors. Then it might be fun to make a big boy liner lock workchamp version too though. Oh and maybe an alox scaled one if I make some scales... hmmm
-
Well the last of my donor SAKs arrived today. I was waiting on a OHO sentinel to get the liner lock for that.

And here is a pic of a OH vs reg blade.

If all goes well I should be showing off the re-assembled 111mm shortly. :D
-
Syph...for some reason, the scissors that you have pictured closely resemble the 91->84 modded scissors that you make.
-
I already find it exciting to see the monster in its parts but can't wait to see it in its final form.
-
-
...
If all goes well I should be showing off the re-assembled 111mm shortly. :DHow shortly?

:D
I had it mocked up fast, but there is a problem. The phillips drivers each seem to take a bit more than their width in a layer, so the stock liners I was using dont quite work. I need to shave some off where it rubs and try again. Also I need to make a notch in the lock release for the cap lifter as its blocking the tab to flip out the long phillips. It'll work though, just a few tweaks. :D
-
I always liked the Locksmith and after seeing this thread had to order a non-OH one :D Maybe I will put DD scales on it.
Robert, alox scales for 111 mm would be very, very nice. Even without parts mix between side lock and liner lock models. I like the side lock ones too, I do not see them less solid than their OH brothers - well, except the large flat screwdriver that's a big improvement for me on the later. The main blades are nice for me on both kinds.
-
Any news?
-
Well I gotta use the alox scales I made up now, but still havent had a chance to get to it.
-
Well a few years late but thanks to the pioneer x scissors I can finally finish this mod. :D
This is just the mockup but its good to go and I just have to peen and put scales on.







-
-
Noice!
-
I´m about as quick as Robert, though - All I have is a stash of torn apart knives, spare scales and crazy ideas.

-
And... finally got around to assembling this.




I put a point on the blade as well as it drives me nuts the come blunt.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

