Show off your Sak mod's!
-


Red electrician and soldier electrician :)
-
Hello, this is my first time posting anything on these forums but I thought I would share my latest creation. I made some 93mm aluminum scales with the grid pattern of the model 61 soldier knife. I added of course a few differences to the shield. ;) The anodizing didn't turn out the way I hoped but maybe next time.. Hardened pivots, turned screw faces, phosphor bronze thrust bearings. I was just happy to get all the digitizing and alignment of holes correct for this first round. Now off to tinker with it some more! :D
-
@Griffon75 said:
Hello, this is my first time posting anything on these forums but I thought I would share my latest creation. I made some 93mm aluminum scales with the grid pattern of the model 61 soldier knife. I added of course a few differences to the shield. ;) The anodizing didn't turn out the way I hoped but maybe next time.. Hardened pivots, turned screw faces, phosphor bronze thrust bearings. I was just happy to get all the digitizing and alignment of holes correct for this first round. Now off to tinker with it some more! :DStunning!! Really well done.
Sent from my E6653 using Tapatalk
-
That's excellent! Care to share some of your processes? Did you CNC the scales? How did you digitise them - 3d scanner?
-
Yes! I used a CNC Mill to probe the profile; however, I didn't go solely off the data from the machine. Since this knife is very symmetrical, I made sure the points were turned into clean arcs perfectly symmetrical in CAD and not splines which is what your getting essentially from the machine. The hole spacing is on metric numbers, no big surprise, that was easy to transfer over to imperial. Everything took a little bit of fiddling with in CAD, not too bad.
Right now Im messing with the grid pattern a bit and different designs on the face. The scales are pocketed on the other side as well but to be honest there isn't that much weight to these to begin with..Hah Only will that come in to play when I start the titanium versions. I still need to get the "alox" versions down first.
-
Good stuff.What are the dimensions of the grid pattern? I figured out a pretty close approximation by trial and error a while back - would be interested to see what you measured it to be.
Got any photos of the milling on the inside of the scales?
-
The pattern is 1.5 mm x 1.5 mm. The soldier pattern is offset differently than the civilian "pioneer" version with the Vic shield.
I'll post some more photos of the scales. Maybe I'll start a separate thread for it..
-
That is really nice.

I really like the idea of the cross bow in place of the cross.
-
@Griffon75 said:
Hello, this is my first time posting anything on these forums but I thought I would share my latest creation. I made some 93mm aluminum scales with the grid pattern of the model 61 soldier knife. I added of course a few differences to the shield. ;) The anodizing didn't turn out the way I hoped but maybe next time.. Hardened pivots, turned screw faces, phosphor bronze thrust bearings. I was just happy to get all the digitizing and alignment of holes correct for this first round. Now off to tinker with it some more! :DWelcome, and nice job

Sent from my SM-G920R4 using Tapatalk
-
Beautiful job on the scales and welcome

-
Awesome scales, I especially like the shield!.
-
Awesome scales, I especially like the shield!.
Yeah, the umbrella looks great!

:D

-
-
@hiraethus said:
Pulled the scales off my large Voyageur mod to build a Super Electrician:


So much win!!

-
@hiraethus said:
Pulled the scales off my large Voyageur mod to build a Super Electrician:

Nice I might do the same thing
Sent from my XT1092 using Tapatalk
-
@hiraethus said:
Pulled the scales off my large Voyageur mod to build a Super Electrician:

I want this so bad.
-
Climber 91mm Alox & Titanium. Cerakote Safety Orange H-243. Titanium grade 5.
-
Very pretty, I'm currently getting some titanium to do the same thing, but I'm going to do titanium on both sides
Sent from my XT1092 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


