Difference in Supertool Blades
-
Two Super Tools here:
Stainless - date 0299 & 0399 - non saber
BO - date 0797 & 0897 - non saber
The stainless ST has polished file and the BO appears to have been this style of file before it was BO finish was applied.
Both have small nail nicks.
-
Wanted to add this in here. A while back while looking over some original Supertools I noticed changes that took place on the Supertool plier head. In the pic below are two Supertool plier heads with different size pivots. The larger pivot is date coded 0894 both handles. The smaller pivot is date coded 1196 and 1296. All my original Supertools from 0894 to 1295 have large pivots. My only 96 is the one shown so I`m guessing
the pivots were changed some time in 96. The rest of the Supertools I have from 96 onwards all have small pivots -
Next is the hard wire notch being added to the plier head. First pic has date codes of 0595 in both handles no hard wire notch. Second pic has date codes of 0595 and 0795 and has a hard wire notch. Again I`m assuming the chage took place in mid 95
-
Mine is dated 1000,has the smaller rivet,and the blade like your 97.

-
:o Interesting about the notch and the pivot David
I will check mine later and see what mine are 
-
-
:o Interesting about the notch and the pivot David
I will check mine later and see what mine are 
Ya know I don't know if I ever checked this or not ::) :D Since then I have acquired a few more Super Tools as well
Guess I need to go and check them all now :ahhhImpressive pause bump. :P :D
-
:o Interesting about the notch and the pivot David
I will check mine later and see what mine are 
Ya know I don't know if I ever checked this or not ::) :D Since then I have acquired a few more Super Tools as well
Guess I need to go and check them all now :ahhhImpressive pause bump. :P :D
Mercy sake Poncho its been 5 1/2 years already. Get to checking.
:D :D -
:o Interesting about the notch and the pivot David
I will check mine later and see what mine are 
Ya know I don't know if I ever checked this or not ::) :D Since then I have acquired a few more Super Tools as well
Guess I need to go and check them all now :ahhhImpressive pause bump. :P :D
Mercy sake Poncho its been 5 1/2 years already. Get to checking.
:D :DI know Dave, I know
Guess it made it to page 2 and when it gets there well ya know
:D I really will check this time though ;):o Interesting about the notch and the pivot David
I will check mine later and see what mine are 
Ya know I don't know if I ever checked this or not ::) :D Since then I have acquired a few more Super Tools as well
Guess I need to go and check them all now :ahhhImpressive pause bump. :P :D
That's how we thread killer/resurrecter's roll 8)
-
I have one on the way that has the first version of the blade. 0796 date
-
-
I have one on the way that has the first version of the blade. 0796 date
Good find Steve
I have at least one myself as well now but until I check ::) I don't know the date code :DThanks, I might be flipping it though. I really got it for the leather sheath. But if I like it more than my other OG I may flip that one instead.

-
The Original Supertool was my first multitool. I bought it back in '94, and even though I don't use it for EDC anymore, it still gets a lot of fiddling time ...

Still one of Leatherman's finest in my humble opinion, the fit and finish, the mirror polish, the lack of flaws ... What has happened Leatherman ... ::)
Here are some pics of my Original Supertool's blade (date code 1094):
-
So shiny :o I am with you Top-Gear
the OG Supertool was about as good as it gets. If it had a way of unlocking the tool in use with some sort of push lock similar to the 300 it wouldn't have needed to be changed still to this day 
-
Well let me see I have
SS 0898/0898 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file
SS 0800/0800 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, matte file
SS 0698/0698 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file, CC
SS 1097/1097 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file
SS 1095/0995 saber point, larger pivot, hard wire notch, Leatherman USA on plier head, shiny file
BO 0798/0798 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file CC
BO 1000/1000 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, matte file
BO 0397/0397 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny fileWell that is what I have now
The SS 1095/0995 and the BO 0397/0397 are both still NIB the BO still has the sticker even :o All but one of my Supertools is in very good shape, even the one I use to EDC
One of the BO is the only one that is kinda rough so I usually give it harder use than most of my tools :D5 and a half years late but better late than never I guess :D
-
Just checked mine.
Poncho:
SS 0898/0898 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file
SS 0800/0800 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, matte file
SS 0698/0698 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file, CC
SS 1097/1097 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file
SS 1095/0995 saber point, larger pivot, hard wire notch, Leatherman USA on plier head, shiny file
BO 0798/0798 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file CC
BO 1000/1000 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, matte file
BO 0397/0397 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny fileSteveC:
SS 1197/0198 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file, CC
SS 0798/0898 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, shiny file
SS 0696/0796 saber point, larger pivot, hard wire notch, Leatherman USA on plier head, shiny file
BO 0201/0201 reg clip point, smaller pivot, hard wire notch, Leatherman USA on plier head, matte file CC
BO 0596/0696 saber point, larger pivot, hard wire notch, Leatherman USA on plier head, matte file -
What amazed me more than anything is that all the date codes of each Supertool matched each other :o I just assumed that a few of them would be a month or so different here and there :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

