NEW Leatherman SURGE owners club.
-
Yesterday was the first time I disassembled Leatherman tools. Being a big fan of old-scale Charge, I swapped the used serrated blade from a used Ti with one from a new Wave. This brought my Charge Ti from a 8.5 to a 9.5 in term of being like new :D . I tend to use the Wave more anyway.
So, after being done with the Wave/ Charge swap, I looked at the used Camo Surge I bought off eBay. I decided to refresh the Camo Surge with a new serrated blade from a BO Surge (new version). As I was doing the swapping, I thought, heck, let's just put the new style plier head on the Camo too, to bring it from a 7.5 to a 9.0. An hour in with handles and blade already swapped, I found the new plier head did not fit in the old handle channels properly. It seemed like the stops in the old handles were a bit too high, resulting in a gap between two handles when closed. So, another hour to swap the heads back to their original handles.
So, yeah... the new plier heads will not fit in old handles
I was pissed, but also had fun playing with the tools. -
Don't forget to use some thread locker ie loctite.
If you remove the blade safety lock pins then the handles will close.
Done with the right technique it's possible to reuse the rivet. -
@SurgeIsGreatMultitool said:
Guys check this out!
Posting to Australia it says on the offer but if you contact the author of the offer he will probably check if it can be posted to your location also. It is only $11.95 AUD
Here I have attached a few pictures.
Got mine DRHL (its called Detachable Removable Handle Lock for Leatherman Surge) yesterday! This is awesome! Locks the handles when you just need the outer tools only!It makes the whole tool sturdy when you using the outward located tools and for e.g. I tried to hack couple of palm branches and it was much better in the hand, much much better!
Just tried to do light hammering with the bottom of the tool with the lock attached. Very cool.
Don't Detachable and Removable mean the same thing? Is that why a bent hunk of steel costs $12? Got to pay extra for the redundancy?
Also:
(c) Get4Pet, Australia No part of this description can be copied, reproduced, or repeated in any form. This is a unique product. You may not copy, reproduce, manually copy using any machinery, hand held tools or any other manufacturing and reverse engineering methods. Patent is pending. DISCLAIMER No any claims related to safety will be accepted whatsoever for the use of this product. What you see is what you get. IMPORTANT NOTE: All other tools have similar locks and falling into category of the copy or derivative of the DRHL lock work must not be produced, copied and reverse engineered.
Quite the disclaimer you have there. Almost like you don't want someone stealing your intellectual property, although spamming someone's website is perfectly ok huh?
Want to post your work here legitimately? Contact me and we will discuss paid advertising options since this forum is advertiser and member sponsored. Anything less is like stealing intellectual property, which, as I guess you know, is bad.
Def
-
@SurgeIsGreatMultitool said:
Guys check this out!
Posting to Australia it says on the offer but if you contact the author of the offer he will probably check if it can be posted to your location also. It is only $11.95 AUD
Here I have attached a few pictures.
Got mine DRHL (its called Detachable Removable Handle Lock for Leatherman Surge) yesterday! This is awesome! Locks the handles when you just need the outer tools only!It makes the whole tool sturdy when you using the outward located tools and for e.g. I tried to hack couple of palm branches and it was much better in the hand, much much better!
Just tried to do light hammering with the bottom of the tool with the lock attached. Very cool.
Hi welcome to the forum, but please keep in mind its considered very bad form (and against forum rules) to post spam links, and links to ebay auctions that are pretty clearly your own.
Regarding the product, I cant see a market as Ive never had an issue with the handles on any of my leathermans flopping open. If you did, you might have just tightened the screws.
-
Guys check this out!
Posting to Australia it says on the offer but if you contact the author of the offer he will probably check if it can be posted to your location also. It is only $11.95 AUD
Here I have attached a few pictures.
Got mine DRHL (its called Detachable Removable Handle Lock for Leatherman Surge) yesterday! This is awesome! Locks the handles when you just need the outer tools only!It makes the whole tool sturdy when you using the outward located tools and for e.g. I tried to hack couple of palm branches and it was much better in the hand, much much better!
Just tried to do light hammering with the bottom of the tool with the lock attached. Very cool.
Hi welcome to the forum, but please keep in mind its considered very bad form (and against forum rules) to post spam links, and links to ebay auctions that are pretty clearly your own.
Regarding the product, I cant see a market as Ive never had an issue with the handles on any of my leathermans flopping open. If you did, you might have just tightened the screws.
@Grant Lamontagne said:
Guys check this out!
Posting to Australia it says on the offer but if you contact the author of the offer he will probably check if it can be posted to your location also. It is only $11.95 AUD
Here I have attached a few pictures.
Got mine DRHL (its called Detachable Removable Handle Lock for Leatherman Surge) yesterday! This is awesome! Locks the handles when you just need the outer tools only!It makes the whole tool sturdy when you using the outward located tools and for e.g. I tried to hack couple of palm branches and it was much better in the hand, much much better!
Just tried to do light hammering with the bottom of the tool with the lock attached. Very cool.
Don't Detachable and Removable mean the same thing? Is that why a bent hunk of steel costs $12? Got to pay extra for the redundancy?
Also:
(c) Get4Pet, Australia No part of this description can be copied, reproduced, or repeated in any form. This is a unique product. You may not copy, reproduce, manually copy using any machinery, hand held tools or any other manufacturing and reverse engineering methods. Patent is pending. DISCLAIMER No any claims related to safety will be accepted whatsoever for the use of this product. What you see is what you get. IMPORTANT NOTE: All other tools have similar locks and falling into category of the copy or derivative of the DRHL lock work must not be produced, copied and reverse engineered.
Quite the disclaimer you have there. Almost like you don't want someone stealing your intellectual property, although spamming someone's website is perfectly ok huh?
Want to post your work here legitimately? Contact me and we will discuss paid advertising options since this forum is advertiser and member sponsored. Anything less is like stealing intellectual property, which, as I guess you know, is bad.
Def
I love how this forum deals with spammers. Thanks for keeping this place safe and sane......well safe at least

-
Has anyone tried to modify the eyeglass screwdriver bit to make it fit the large bit holder?
The new Surge does not have the bit holder for the eyeglass bit so I am contemplating to cut off both ends of a bit that I never use, drill a hole through it and then glue or solder the eyeglass bit in that hole with the ends projecting to each side. Would this work or are the Leatherman bits too hard to drill through with a regular metal drill? Any other problems?
I really do not understand why Letherman made a special bit holder for the smallest bits. It must be possible to make a really small screwdriver for a regular size bit holder.
-
@Eld said:
Has anyone tried to modify the eyeglass screwdriver bit to make it fit the large bit holder?The new Surge does not have the bit holder for the eyeglass bit so I am contemplating to cut off both ends of a bit that I never use, drill a hole through it and then glue or solder the eyeglass bit in that hole with the ends projecting to each side. Would this work or are the Leatherman bits too hard to drill through with a regular metal drill? Any other problems?
I really do not understand why Letherman made a special bit holder for the smallest bits. It must be possible to make a really small screwdriver for a regular size bit holder.
That small bit fits on surges handle. Part where lanyard loop goes, and under the lock. There is some pictures of it here somewhere. I do not remember whom tried it first.
-
@Crow said:
That small bit fits on surges handle. Part where lanyard loop goes, and under the lock. There is some pictures of it here somewhere. I do not remember whom tried it first.I think there are pics of this earlier in this thread.
@Eld said:
Has anyone tried to modify the eyeglass screwdriver bit to make it fit the large bit holder?The new Surge does not have the bit holder for the eyeglass bit so I am contemplating to cut off both ends of a bit that I never use, drill a hole through it and then glue or solder the eyeglass bit in that hole with the ends projecting to each side. Would this work or are the Leatherman bits too hard to drill through with a regular metal drill? Any other problems?
To answer your question, yes, someone has done this. I can't remember who did it or where it was posted but it's on the forum somewhere...
-
I can finally join this club! :D

-
I can finally join this club! :D

Where did you get such a nice Surge?
From this strange dude who used to live in Texas, that gave it away in a kick ass contest :D
-
I can finally join this club! :D

Where did you get such a nice Surge?
From this strange dude who used to live in Texas, that gave it away in a kick ass contest :D
I know that guy, handsome and smart.
Very true.
He has a great sense of humor too. -
[quote author=Grathr link=topic=48706.msg1255561#msg1255561 date=1460825865]
I can finally join this club! :D

Where did you get such a nice Surge?
From this strange dude who used to live in Texas, that gave it away in a kick ass contest :D
I know that guy, handsome and smart.
Very true.
He has a great sense of humor too.
[/quote]You don't have to butter me up anymore the GAW is already over.
-
[quote author=HarleyXJGuy link=topic=48706.msg1255962#msg1255962 date=1460907532]
[quote author=Grathr link=topic=48706.msg1255561#msg1255561 date=1460825865]
I can finally join this club! :D

Where did you get such a nice Surge?
From this strange dude who used to live in Texas, that gave it away in a kick ass contest :D
I know that guy, handsome and smart.
Very true.
He has a great sense of humor too.
[/quote]You don't have to butter me up anymore the GAW is already over.
[/quote]Humm... Yes... The GAW....
[emoji7]
-
Mail call from Waveman7... Traded him a Signal for it.
For all the Signal dissenters, I didn't get rid of it because I didn't like it, I just realized that for the weight on the trail, I could just bring my Wave in a hip pocket... I know some prefer to hike lighter, but hey... you know; everyone hike your own hike, right?
I digress, I was ready to give the Surge a try. I gotta say, for almost 4 more ounces heavier than the Wave, she's a beauty of a tool... tempting to try as EDC... and I may... ;-)
Anyway, here's some pics:






... and the obligatory pic of size comparison to his little brother.

Sent from my iPhone using Tapatalk
-
Nice looking Surge! Welcome to the club.
That's us mobile
-
@ducttapetech said:
Nice looking Surge! Welcome to the club.That's us mobile
Thanks man. Do you EDC yours?
Sent from my LG-V495 using Tapatalk
-
Nice looking Surge! Welcome to the club.
That's us mobile
Thanks man. Do you EDC yours?
Sent from my LG-V495 using Tapatalk
Yes I do. It is one of my main Multis and all time favorites. I even did the Surge challenge with it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login