Firekits
-
-
@Poncho65 said:
Nice firekits Spork
Nice firekits toolguy

Here are our fire kits.
What all is in your kit toolguy?
The fire-kit in the center photo contains the following:
On the left are two containers of waterproof matches.
In between those is a windproof butane lighter.
Behind those,in another compartment, are long burn matches.On the opposite side:
At the bottom is a home made fire piston.
Above that from the left are waterproof fire fuses.
Next is an Exotac ferrocerium rod with a spare rod.
Next to that is a tin of char-cord.In the zipper pouch behind these items is another fire piston by Numyth.
The second fire-kit contains virtually the same items with one exception, instead of two fire pistons it has two different ferrocerium rods and one fire piston.
-
Nice kits toolguy
I like to have multiple kits too. I am building my 3rd fire kit. Calling it my deluxe kit. Waiting for one more piece to arrive and I will post some pics. -
@rishardh said:
Nice kits toolguy
I like to have multiple kits too. I am building my 3rd fire kit. Calling it my deluxe kit. Waiting for one more piece to arrive and I will post some pics.Thanks but I can only claim one fire-kit,the other one belongs to my wife.
I ordered some Fresnel lenses to add another dimension to our fire-kits.
-
Well the Fresnel lenses arrived today.I was curious whether these paper thin plastic lenses performed as advertised.
Here are pictures that illustrate the relative ease at which these lenses can create fire.It took a mere two to three seconds for these lenses to burn leaves and dry bark.
These pictures aren't the best for proving the fire making capability of these lenses but it should illustrate that it's possible.The second picture shows the smoke emanating from the burned leaf.
-
The key I find to burning glasses is finding tinder that will produce flame or a usable ember. Its easy to burn holes in paper and fry ants...but it is a little harder to get actual fire.
-
@toolguy said:
Well the Fresnel lenses arrived today.I was curious whether these paper thin plastic lenses performed as advertised.Here are pictures that illustrate the relative ease at which these lenses can create fire.It took a mere two to three seconds for these lenses to burn leaves and dry bark.
These pictures aren't the best for proving the fire making capability of these lenses but it should illustrate that it's possible.The second picture shows the smoke emanating from the burned leaf.
Nice addition
Glad it works. I have had no luck with quarter size and smaller. Even with the concentrated beam aimed at a matchstick head. -
My 3 fire kits. The one on the right is my latest kit. Also my most expensive :o Paired them with a card MT with a magnifying glass and a MT with a decent saw. Googled and added prices to show how cheap and how expensive a kit can be.
Beater Kit - $8 (4 deep)
Bic Lighter
Match Box
Mag and Flint
Pet Balls - Home Made
UST Card MT
Fury MT
Cost with MTs ~ $20Extreme Weather Kit - $30 (5 deep)
Crocs Lighter
UCO Stormproof Matches
UST Blastmatch
Wetfire Starters
Tool Logic Survival Card MT
LM Sidekick
Cost with MTs ~ $75Luxury Kit - $75 (4 deep with Spirit, 5 deep with Signal)
Numuth Vulcan Piston
Exotac Nano Striker
Zippo Windproof Lighter
Char Cloth - Home Made
Victorinox Swisscard Lite
LM Signal/Victornix Spirit
Cost with MTs ~ $200+ -
Nice bunch of fire starting stuff rishardh
Also thanks for the list it always help me when I am looking for more stuff :D -
@rishardh said:
...I have had no luck with quarter size and smaller...I've done it with a SAK lens and cattail fluff. It requires strong sun and time. I slowly built up a charred spot in compressed fluff...too much airspace will prevent an ember from forming. When it reaches the point where it can sustain itself, you will hear the seeds pop and see the charred fluff spreading. If you look closely, you can see a wisp of smoke centered on the dark spot.
I've also charred cattail fluff for flint and steel. It's very fragile, so you have to put it down and cast sparks into it instead of holding it on the flint.



-
@Spork, Lord of Lime Jello! said:
...I have had no luck with quarter size and smaller...
I've done it with a SAK lens and cattail fluff. It requires strong sun and time. I slowly built up a charred spot in compressed fluff...too much airspace will prevent an ember from forming. When it reaches the point where it can sustain itself, you will hear the seeds pop and see the charred fluff spreading. If you look closely, you can see a wisp of smoke centered on the dark spot.
I've also charred cattail fluff for flint and steel. It's very fragile, so you have to put it down and cast sparks into it instead of holding it on the flint.
Thanks for sharing your method. I guess with the right materials it's possible. Will try this when our neighborhood cat shows up on a sunny day again :D
-
@Spork, Lord of Lime Jello! said:
...I have had no luck with quarter size and smaller...
I've done it with a SAK lens and cattail fluff. It requires strong sun and time. I slowly built up a charred spot in compressed fluff...too much airspace will prevent an ember from forming. When it reaches the point where it can sustain itself, you will hear the seeds pop and see the charred fluff spreading. If you look closely, you can see a wisp of smoke centered on the dark spot.
I've also charred cattail fluff for flint and steel. It's very fragile, so you have to put it down and cast sparks into it instead of holding it on the flint.
Thanks for sharing your method. I guess with the right materials it's possible. Will try this when our neighborhood cat shows up on a sunny day again :D
It will only work if you can get him to stay still long enough

-
:D
@Spork, Lord of Lime Jello! said:
...I have had no luck with quarter size and smaller...
I've done it with a SAK lens and cattail fluff. It requires strong sun and time. I slowly built up a charred spot in compressed fluff...too much airspace will prevent an ember from forming. When it reaches the point where it can sustain itself, you will hear the seeds pop and see the charred fluff spreading. If you look closely, you can see a wisp of smoke centered on the dark spot.
I've also charred cattail fluff for flint and steel. It's very fragile, so you have to put it down and cast sparks into it instead of holding it on the flint.
Thanks for sharing your method. I guess with the right materials it's possible. Will try this when our neighborhood cat shows up on a sunny day again
It will only work if you can get him to stay still long enough

:D
-
I was able to light very fine wood shavings with the same method of building up char using the larger burning glass of a Hudson Bay tobacco tin. I think this can be accomplished with a Fresnel lens as well.


-
I call this my "Need Fire Now!" kit...heavy on the tinder/firestarters. Primary ignition is flame based.
-Small Sistema box
-Storm matches and lighter
-4 Coghlan's fuel tabs, 3 plain large cotton balls
-7 cotton dental rolls dipped in a mixture of wax and Vaseline
-8 Coghlan's Tinder tabs, candy-wrapped in wax paper to prevent them from sticking together.
-Sheet of aluminum foil (12" x 12") to keep tinder off wet ground or to place on top of a fire lay in the rain.There is a third form of ignition in this kit...cotton balls, dental rolls and the tinder tabs can all be sparked with an empty lighter.


-
Another great fire thread that deserves a
I need to get some stuff together and take some pics 
-
Nice bump. My kits have changed a lot. I am of two minds. 1. Fire needed NOW. I use a lighter and something flammable. My choice is similar to Sporks, those fire tabs. 2. Storm proof matches and again a flammable fire tabs. 3. Big Arse Fire Steel and flammable tabs. I do however like to make fire with natural material for fun. I'll have to get up some pics for this thread. -
Sounds like some good changes and some nice gear, Aloha

-
Just got this in the mail this past evening
it is the Emergency Fire Kit by Zippo, EFK for short
it came well packaged and after a bit of admiring, I cut it out if it's plastic prison :D it is very well made and the Zippo striker is as you would expect any Zippo product to be with lots of sparks
and you can take it apart to reveal the water tigh compartment for your tinder
the tinder is some type of cotton that has been treated with a chemical (I don't know which one) to make it light easily and burn for several minutes
I am looking for drier weather out so I can play with this some :ahhh



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login