Going Buck Wild.
-
Thank you gentlemen.
Here is a Buck 112 that I spotted on ebay and immediately knew this was not only a beautiful but unique knife. I wanted to know more about the person who modified it.Unfortunately I reached a dead end in my search but in no way did that diminish my desire to own this beauty.
I hope these photos do this knife justice because it truly is a work of art.I think this knife rivals the work of David Yellowhorse even though it is less ornate.
I wish I knew more about the materials but I'll share what I do know.The basic handle material is Desert Ironwood.Inlayed into the ironwood is a brass oval with a sterling silver insert with a Haida symbol.There are also brass spacers and I believe Abalone shell spacers that add an elegance to this knife.
-
Another beauty

-
Here is a Buck 106 hatchet that I forgot to include in this thread.These 106's usually bring about $125.00 on the bay.They enter a whole new realm of collecting if they have the original box.If they're equipped with the rosewood handle then the price climbs north of $300.00.I watched in disbelief,as <u>just the box</u> for a 106 hatchet,sold for almost $80.00.
-
Stag + Damascus = great looking knife
-
@Marcellus said:
Stag + Damascus = great looking knifeThanks Marcellus.
I have a few more here.I just need some time to take pictures.
Here is a very inexpensive Buck 110 Hunter.It's claim to fame is the redwood scales and the drop point blade.I did take the time to clean it and then mirror polish the spine of the blade.
-
This is one of my newest additions to the Buck collection.It was engraved by a young lady who studied her craft in Italy.To be honest I don't know much about engraving other than the difference between machine and hand engraving.This was done by hand using a chisel and hammer.
I think it creates a very distinctive appearance and even adds a touch of class to the ubiquitous Buck knife.
-
Great looking 110
No longer ubiquitous by a long shot! -
@Marcellus said:
Great looking 110
No longer ubiquitous by a long shot!Thanks Marcellus.I was so impressed with Samantha's work that I ordered a 112 Ranger.
Here is a Buck 110 that was manufactured in 1997 and was deemed the The Native American Series.Buck was set to produce 1,500 each of four versions.The information I was able to gather indicated they didn't sell well and the number that were actually manufactured were much smaller.The emblem embedded into the scale were to depict a Quail, Kachina Doll, Thunderbird and a Scorpion.I bought the Kachina doll model.My research indicates that Buck may have mistaken this symbol.It appears this symbol more closely resembles a Zuni Knife Wing.
"The Zuni Pueblo Knife Wing is a symbol of the Zuni Warrior Society and is a protector of the land and its inhabitants; it represents courage, honor, wisdom and strength. The spirit of this symbol is carried into battle or other life threatening situations. The Knife Wing is also a guardian angel watching each and every one of us."
An anthropologist describes the Zuni Knife Wing as:“This curious god is the hero of hundreds of folklore tales, the tutelary deity of several societies of Zuni. He is represented as possessing a human form, furnished with flint knife-feathered pinions, and tail. His weapons are the Great Flint-Knife of War, the Bow of the Skies (the Rainbow), and the Arrow of Lightning."
-
I found this picture illustrating all four in this series.

-
The first picture of this knife that I posted shows the Zuni symbol upside down.LOL
Here are two pictures illustrating the correct orientation of this symbol.
-
You have been picking up some beauties for sure.

-
@zoidberg said:
You have been picking up some beauties for sure.

Thanks ZB.
Here are a few traditional models and a re-post from the fixed blade thread.
A few more Bucks arrived recently.
The first is a model 120 and it's the largest knife in their classic series.
The next one is a 121 and this was their "fisherman' model until recently.It was dropped and replaced with several more modern designs.
Both have the Boone and Crockett logo placed on the handle and two shibboleths of the club are scripted on the blades.
-
This came into my possession a few days ago and I know very little about its origins.I asked the seller but they have no information because they purchased it at an estate sale.I've searched its model number but with little success.I'll continue to look for more information but for the purpose of this thread I'll list the components of this particular Buck.
The most obvious component is the great Sambar stag handles and the turquoise spacers.If you've viewed the previous thread of the Model 112 with the buffalo handle, then you'll recognize the chip flint blade which this knife has as well.The frame is made of nickel silver with nickel silver spacers between the stag and the turquoise.
The type of steel is not marked on the blade but it is listed on the COA as 420HC.The script on the blade does indicate this is #452 of 1,000.It also has no date stamp and unfortunately this is not listed on the CAO.
-
Have you noticed any variation in the sheaths? (Specifically the folder versions) Or are they mostly the thick leather versions?
-
@NKlamerus said:
Have you noticed any variation in the sheaths? (Specifically the folder versions) Or are they mostly the thick leather versions?Here is what I know about Buck sheaths.There are two standard sheaths offered with the Buck 110 Hunter.The first is the traditional stiff black leather and the second is a cordura nylon sheath.These are illustrated in the first picture.
The second picture illustrates the two sheaths that are offered either through the Custom Shop or from dealers who have ordered non-standard/custom knives from Buck.They are both made from what Buck refers to as distressed leather,meaning they are much softer than the standard offerings.As can be viewed,they are offered in either black or brown.
The offerings for the Buck 112 Ranger,either as standard equipment,though the custom shop or from a dealer with a custom knife are slightly different.There are only two options currently available.The stiff black leather sheath or the cordura nylon sheath.The third picture illustrates these two offerings.
I hope this helps.
-
This is the Buck 112 Ranger that was engraved by Samantha.She is the engraver who engraved the 110 Hunter at the top of this page.She does wonderful work and her engraving creates a unique piece to be used and admired for years to come.
I'm so impressed with her work,that I will be commissioning her to engrave several more knives depicting game scenes.
-
I meant to comment on the engraved 110 above
Now I can compliment both the 110 and the 112
The engraving just impresses me a lotAs someone who dabbles in woodcarving I really appreciate the engraving of small unforgiving surfaces
like metal -
@Marcellus said:
I meant to comment on the engraved 110 above
Now I can compliment both the 110 and the 112
The engraving just impresses me a lotAs someone who dabbles in woodcarving I really appreciate the engraving of small unforgiving surfaces
like metalThanks Marcellus.
I'm in awe of people who can perform this type of work.
-
I see this thread has only gotten exponentially better in my absence. I look forward to catching up with this one :D
BEAUTIFUL knives as always TG

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login