Problem with Electricians?
-
Beautiful shot Joe58 :o
Now you need a few Electrician Plus's to go with them
:D ;)I just prefer the two layers. And I've no use for the saw for my mundane activities. When I venture out, the Vic MT is always along, and I've one of those folding saws that are around 8" closed maybe. Forget who makes it but it cuts smaller stuff quite well, like if I'm cutting a few branches to prop in front of me when I'm hunting or something like that. Or cutting a branch to smooth over the horses hoof prints if the posse is on my trail and I'm trying to throw them off my trail. ;)
About the keyring - If I do end up with one, like on the Swiss +B electricians, I take it off with the Dremel. I find that in my grip, if I need to bear done a bit, that keyring nub hurts my hand. I really wish they'd have kept the old hollow rivit.
I really wish that too. I modded my Farmer to a hollow rivet because I found the lanyard nub too uncomfortable and I have to have a lanyard.
I can't see a good reason for Vic to not have a hollow rivet - it's the best of both worlds. Nothing to grind off, but nice and comfortable to use.
I bet they got rid of the hollow rivet because people were taking their knives apart and messing them up. Make ot harder to take them apart.
-
+1 on the hollow rivet.

-
@Captain Howdy said:
+1 on the hollow rivet.
Sweet avatar Cap

-
@styx said:
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
-
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?
Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
I've actually used the can opener more for phillips screws than opening cans
-
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?
Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
I've actually used the can opener more for phillips screws than opening cans
thats the aspect I would miss out on. I'm still deciding which will be my first SAK (in a long long time), I thought I had finally figured it out and was going to order the electrician but remembered Amazon doesn't play well with PayPal.
I need the use of a smaller flathead for removing wall plates, scoops, and other electrical outlets where that small flat head sized screws doesn't work well with the larger sizes flat head bits. Both in width and thickness.
-
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???
-
@kaput said:
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???Maybe the Harvester is a good alternative for you? They are widely available. Then you will of course have the pruning blade instead of the electricians blade...
To be very honest: I very much prefer the pruning blade over the electricians blade ::)
-
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???
Maybe the Harvester is a good alternative for you? They are widely available. Then you will of course have the pruning blade instead of the electricians blade...
To be very honest: I very much prefer the pruning blade over the electricians blade ::)
I'll take the electrician opposite the pruning blade and ditch the main blade.

-
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???
Maybe the Harvester is a good alternative for you? They are widely available. Then you will of course have the pruning blade instead of the electricians blade...
To be very honest: I very much prefer the pruning blade over the electricians blade ::)
I'll take the electrician opposite the pruning blade and ditch the main blade.

If they were a little cheaper i'd probably take one of the carver models from Swiss Bianco. They have 3 blades

-
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?
Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
I've actually used the can opener more for phillips screws than opening cans
Fair point, I use the alox electrician as my work Cary pocket knife normally and being a sparkie i tend to have a stack of screw driver and a impact driver close by
That is a good point though, I also tend to grind down the end of the bottle opener to about the same side as the driver on the can opener as I never really need a flat blade that big and asking as you don't take to much off still opens bottles fine.
I'll send a photo when I get home
Sent from my XT1092 using Tapatalk
-
@kaput said:
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???I posted pics of what the blade looks like after taking a polisher cloth wheel bit in my Dremel and Flitz to the +B advertising. It takes it off nicely except for the vague outline of it that seems to be under the finish. Takes it to looking like a watermark in the right angle or lighting. Most the time it's not even noticeable. Not near as annoying. Just something to consider. Someone that has a bit more skill and better tools may be able to get it removed even better. But just getting the black inked part off is a huge improvement.
Styx - In my carry, I've added the minichamp in the other pocket which does work well on those outlet covers as well as providing a couple small blades that'll get scalpel sharp. I've found a minichamp and electrician to be a good combo. So I may be cheating just a little by giving up the can opener tool with its little flathead. And the few times when I've tried with the flat head from a Soldier on a stubborn screw, the flat head will twist then that just drives me crazy after that happens. Hate that look. Mental issues. Lol.
-
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?
Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
I've actually used the can opener more for phillips screws than opening cans
thats the aspect I would miss out on. I'm still deciding which will be my first SAK (in a long long time), I thought I had finally figured it out and was going to order the electrician but remembered Amazon doesn't play well with PayPal.
I need the use of a smaller flathead for removing wall plates, scoops, and other electrical outlets where that small flat head sized screws doesn't work well with the larger sizes flat head bits. Both in width and thickness.
ok gentlemen and ladies, this might be the best place to ask - as an alox lover, SAK knight and pragmatist why do I need an electrician?
Should always use a electrician for any electrical work to avoid electrocution or fires ;)
But in all seriousness, I find the electricians blade much more useful than the can opener and I can open cans with it if I need to. Also find the look of the added electrician blade much more pleasing to look at than the can opener
Sent from my XT1092 using Tapatalk
I've actually used the can opener more for phillips screws than opening cans
Fair point, I use the alox electrician as my work Cary pocket knife normally and being a sparkie i tend to have a stack of screw driver and a impact driver close by
That is a good point though, I also tend to grind down the end of the bottle opener to about the same side as the driver on the can opener as I never really need a flat blade that big and asking as you don't take to much off still opens bottles fine.
I'll send a photo when I get home
Sent from my XT1092 using Tapatalk
The answer to all this could be in a companion SAK like a Classic SD or a LM Style PS (a Classic being my edc and Style PS only thing that could give it a run in the rotation)
-
Also. Is there anywhere to still purchase a Electrician Plus? For a somewhat reasonable price. Besides Swiss Branco, I would consider the price, but the branding/advertising on the blade to me is a turn off and deal breaker. ???
I posted pics of what the blade looks like after taking a polisher cloth wheel bit in my Dremel and Flitz to the +B advertising. It takes it off nicely except for the vague outline of it that seems to be under the finish. Takes it to looking like a watermark in the right angle or lighting. Most the time it's not even noticeable. Not near as annoying. Just something to consider. Someone that has a bit more skill and better tools may be able to get it removed even better. But just getting the black inked part off is a huge improvement.
Styx - In my carry, I've added the minichamp in the other pocket which does work well on those outlet covers as well as providing a couple small blades that'll get scalpel sharp. I've found a minichamp and electrician to be a good combo. So I may be cheating just a little by giving up the can opener tool with its little flathead. And the few times when I've tried with the flat head from a Soldier on a stubborn screw, the flat head will twist then that just drives me crazy after that happens. Hate that look. Mental issues. Lol.
You've beat me to the punch by mere seconds

-
A question for the pros, and electrician aficionados. Question on thickness. Is the electrician to the pioneer as the electrician duo is to the farmer? (Im familiar with how thick the farmer and pioneer are but not the electricians, which I plan to buy.)
Pics would be wonderful, but a yes or no would work too

-
I've been carrying an electrician some because it has the smaller sheepsfoot blade. Great for things that need greater control, great for sheeple enviroments and I love the notch for wire stripping.
Sent from my VS985 4G using Tapatalk
-
@kaput said:
A question for the pros, and electrician aficionados. Question on thickness. Is the electrician to the pioneer as the electrician duo is to the farmer? (Im familiar with how thick the farmer and pioneer are but not the electricians, which I plan to buy.)Pics would be wonderful, but a yes or no would work too

Electricians are the same thickness as a pioneer/soldier. I believe the tool set on the 93mm alox models run a tad thicker as compared to cellidor models. A modder would be able to confirm the exact differences.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
