Damascus 2016 Limited Edition
-
@Thunderpants said:
"still can't afford it at all on apprentice wages hahah"Not to worry, matey! Just make your own. Here's my Damascus Spartan Lite...

Brilliant!
-
"still can't afford it at all on apprentice wages hahah"
Not to worry, matey! Just make your own. Here's my Damascus Spartan Lite...

Brilliant!

Hope you used a real topographic map for that...
-
"still can't afford it at all on apprentice wages hahah"
Not to worry, matey! Just make your own. Here's my Damascus Spartan Lite...

Brilliant!

Hope you used a real topographic map for that...
A very rare model, surprised Thunderpants even carries it, I'd have that in a safe deposit box in a bank somewhere. :)
-
@Thunderpants said:
"still can't afford it at all on apprentice wages hahah"Not to worry, matey! Just make your own. Here's my Damascus Spartan Lite...

Holy smurf, that just about made me bust a gut

On the topic of these limited editions... I just can't bring myself to spend that much on a production knife. Doesn't really matter what it is, honestly. I own one overpriced production knife, a Fällkniven TK3, but that was part of an inheritance. And I know the usual online knife community mantra is "sour grapes, you can't afford it, save your money, etc" but it's less about what I can buy and more about what I would. If I had Bill Gates-style money I still wouldn't buy a Sebenza. I might buy a nice custom I can't currently afford, but that's a different sort of thing in my opinion. That said, I don't judge people for having different sensibilities regarding this or any other hobby. The diversity of personalities and opinions that make up our community is half the fun.
At any rate, that's why I'll probably never own a Vic damascus knife. As handsome as that damascus RangerWood was, their price points are absurd to me. I wouldn't pay $200+ for a Spartan unless it contained enough gold that I could make a profit by melting it down. But again, that's just my 2 cents... Which nobody asked for

-
"their price points are absurd to me"
Absolutely, there is no way a SAK should cost 220 euros. They cost maybe 20 to make!
But these are very rare & especially pretty SAKs with a magical property - instead of losing value, like your car, your laptop, your stereo etc, they increase in value. Look at the 2010 Damascus Pioneer. Cost ca. 200 Euros, sells nowadays for >1000. (I don't have one!)It waits to be seen whether these ones will increase in value so dramatically; but I suspect that their value will increase with time. If I had the choice between 1 share in Apple Inc. or a 2016 Damascus, I think the Damascus would be the safer investment. The pioneers, with their metal scales and slick look are more broadly appealing than the gigantic hunting knives of last year or the cute but nerdy wooden Carl Elsner Explorers. Some of those limited editions are sitting around on shelves, unsold. These ones are already hard to find.
It's like buying a painting by an artist you like, not just some guy who happens to be trendy at the moment.
I bought 2 of these: mainly as an investment, but also so I don't say, in 5 years time, "Idiot! Why didn't I buy one of them when I could..."
-
@Thunderpants said:
"their price points are absurd to me"Absolutely, there is no way a SAK should cost 220 euros. They cost maybe 20 to make!
But these are very rare & especially pretty SAKs with a magical property - instead of losing value, like your car, your laptop, your stereo etc, they increase in value. Look at the 2010 Damascus Pioneer. Cost ca. 200 Euros, sells nowadays for >1000. (I don't have one!)It waits to be seen whether these ones will increase in value so dramatically; but I suspect that their value will increase with time. If I had the choice between 1 share in Apple Inc. or a 2016 Damascus, I think the Damascus would be the safer investment. The pioneers, with their metal scales and slick look are more broadly appealing than the gigantic hunting knives of last year or the cute but nerdy wooden Carl Elsner Explorers. Some of those limited editions are sitting around on shelves, unsold. These ones are already hard to find.
It's like buying a painting by an artist you like, not just some guy who happens to be trendy at the moment.
I bought 2 of these: mainly as an investment, but also so I don't say, in 5 years time, "Idiot! Why didn't I buy one of them when I could..."
What you've expressed is a point of view I certainly understand, despite not entirely sharing it. The one thing you said that I'll take direct issue with is "It's like buying a painting by an artist you like, not just some guy who happens to be trendy at the moment."
And I'm all about that too, except in this case it's more like buying a print of the painting than the actual painting itself. That was the whole reason I specified it's an issue I have with production knives, and not just knives in general. I think if it's a one-off, unique piece then the sky's the limit on pricing. I wouldn't pay $1,000 for a knife that hundreds or thousands of other people also have. But like I said, if you or anyone else feel differently, then more power to you and I wish you the best of luck with your collecting

-
Sorry for misreading your first post. I totally get your point about the print vs original.
As far as art is concerned, I usually can only afford a print (like 1 of 50 etchings or something) - and the only way I have of judging art is whether I like it or not. Buying art as an investment doesn't make sense to me - Frankly, I think Damien Hirst is rubbish and I would not want one of his dead sharks on my wall...
I also agree with your point (reading between the lines) of supporting the little guy, the individual knife maker not just some huge corporation. The fact is I know nothing about custom knife making... and I know just enough about SAKs to see this cute looking knife not only looks good, but might be a good investment. (The word "Investment" makes me sound like Donald Trump - truth is, I've got about 7 etchings that I've acquired over the years, one or two watercolours and a bunch of penknives. Not to mention a truly priceless Damascus Spartan Lite...)
-
I get the idea but I would still be enjoying the knife like art. Anything made as a collectible is likely to have a market crash.
-
If the market indeed crashes; we'll merely have some stunningly beautiful swiss army knives. I can live with that :)
Actually, a crash would enable me too complete the set with a 2010 and 2011! :)
-
My uncle in Minneapolis just ran to the Victorinox store and bought me one! Yay
Sent from my outdated communication device using an obsolete application
-
@victor7000 said:
I like it very much...
It fits perfectly in the lineup with the other damascus...

More info and pics on <a href=http://swissknives.info/damascus-pioneer-x-2016/>my blog</a>
Wouldn't it be called Damascai?
-
@tjfarrington2000 said:
Wouldn't it be called Damascai?Easier to call them "My Preciousssss...."
-
My precious has just arrived. Thanks Mr postman!

Should be another one coming later with a different delivery company. Two Damascii in one day. Nice!
-
The 2010 Damast Pioneer was originally selling for $125USD. What I found disappointing about it was not the price, (it was selling a bit higher than the 50 limited ed. alox) but the fact that it wasn't numbered. Something Vic took into account the following year w/the 2011 Damast ebony Climber altho they diminished its value by flooding the market w/4000 as they did w/the Elsener Explorer(7000!!!).
-
The stainless Damascus has 60 HRC, the standard Victorinox steel only 56 HRC. Why should someone produce knifes with better steel if they are not intended to be used? The Damascus is a user! :D
-
I can't believe North America only gets a shipment of 365 to start? Europe must be swimming in them. :D Love this knife though. Anyone still on the fence, looks like DLT still has a few left states side.

-
@BerkshireHunter said:
I can't believe North America only gets a shipment of 365 to start? Europe must be swimming in them. :D Love this knife though. Anyone still on the fence, looks like DLT still has a few left states side.

I don't understand why the U.S gets such a small allocation. I've been told the UK allocation was 1,500pcs.
-
Great looking knife!
-
I can't, not, look at this thread...

-
It is everything I could have expected and more! Feels like a bargain for the price. I urge you guys to scoop one up while you can. The grey scales look great, the blade is awesome. I wasn't expecting it but it looks awesome closed too with the pattern welding visible on the blade spine (duh). The Alox snap on a new knife still gets me, so tight. It is so nice I am carrying it every day (office type use, nothing too abusive).

--
Sent from mobile, please excuse typos
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login