ST 300 owners club
-
Me too poncho, I have been looking for a long time for a used Cap crimper model. :(
That is bad Steve :( Here's to the best possible outcome

Good news ! I'm sending the knife back and the guy who got my ST is returning it to the seller as well. The seller reimbursed me $10 to make up for the screw up. So looks like it will get here eventually.

That's really good news glad to hear it worked out for ya

When it finally got here it was in rougher shape than the pics implied. The medium flat driver was broken completely off, as well as a big chip in the small driver. the plier head had a lot of play in it and the BO coating was all smurfed up. The seller offered to refund my money and let me keep the it, so I decided to send it to Leatherman to get fixed or replaced . Now I'm awaiting it's return from them.
I just hope that they still have a CC model to replace it with.
-
Some people don't give an accurate description because they don't know any better or they are a second hand seller who never bothered to look at the tool themselves. Others are outright trying to defraud. By this seller's response I'd say he didn't necessarily intend to defraud, he just didn't give a complete description of the tool. I'd say split the difference with the seller and ask him to refund maybe 10 or 15 dollars to cover your cost of shipping to Leatherman and let him keep the rest. You're going to get a new tool out of the deal anyway.
-
@Alan K. said:
You can't just post about a bargain without sharing. How obscenely cheap did you find it and where? Congrats on the find by the way. You will surely enjoy having the ST 300 in your rotation.My bad, missed your request.
This was found at a blue big box home store for under 4 ten spots.I do not remember which forums frown deals references.
PS: this was located in IN, have been in MI past week and checked several locations and no more found.
Again, my apologies for the delay reply.
-
Howdy, first post on the forum, as I'm more of a knife guy than MT guy. My Fuse and SAK Officer, Fuse boxed up for repair and Officer AWOL, served me just dandy for about 4 years each. I bought a Rev on sale last Christmas as a tideover for the Fuse, and yesterday was going to buy Case knives on clearance when I ran into 1/2 off price on the ST300 at the orange box's competition. I'm in MI, but there was only one ST300 available, and it was in the key cutting area :confused: whereas the rest were with utikity knives in the tool area. Anyways, I like it quite a bit, and what I thought were excessive blades have been handy.
Quick question, as Im new, where would I find a thread dedicated to working in MTs? I know they will with time but I want this one to be a well oiled machine ASAP.
Connor
Connor
-
Lube it and spend a evening watching tv while constantly open/close it.
At the end of the movie you will butterfly open it! -
Welcome to the forum, and yes, there is no substitute for manually opening and closing the tools for a couple of hours to get them smoothed in. If they are so tight that they are difficult to open they may have been over tightened at the factory. If that is the case you can loosen them up with pliers or a tool made for the purpose.
-
I am in!

ST300 is very good MT. But my old ST is still king of the MT ever for me!!! ;)

-
I can now join the club :)
I just received my CC ST300 back from LM warranty. They replaced both handles and tools but repaired the CC plier head by tightening the pivot and replacing the cutters. I'm sure they would have given me a whole new tool but I put a note in with the tool saying that I hoped they still had CC plier heads if they couldn't repair it. The BO coating is a bit worn on the plier head but no big deal. The sheath I got off of E-bay, It's for the ST200 but fits the ST300 like a glove.

-
Nice!
That's us mobile
-
Now I am gonna have to go searching for a ST200 old school leather sheath
:D Glad they fixed you up at LM CS 
-
@Roman Bureš said:
I am in!
ST300 is very good MT. But my old ST is still king of the MT ever for me!!! ;)

I am still rather partial to my original Supertool as well

-
Repair of chainsaw


-
I ordered and received a box style sheath for my ST300. It fits well and rides much better on my belt than the fabric/Velcro version in the package.

Sent from my iPhone using Tapatalk
-
@LoopCutter said:
I ordered and received a box style sheath for my ST300. It fits well and rides much better on my belt than the fabric/Velcro version in the package.

Sent from my iPhone using Tapatalk
I too am a fan of the box style sheath
That may be one of the reason I like to carry old school LM so much

-
Only Leatherman I bought once, and liked it so much I bought another before a week had passed


Feels strong, and I really dig that I can take the tools out with the gloves on


Latest, and greatest iteration of the Supertool family!


-
-
Soon to be a member! Mine is on the way
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








![FullSizeRender[3].jpg](/assets/uploads/_imported_attachments/migrated/273490_FullSizeRender%5B3%5D.jpg)
![FullSizeRender[1].jpg](/assets/uploads/_imported_attachments/migrated/273492_FullSizeRender%5B1%5D.jpg)
![FullSizeRender[2].jpg](/assets/uploads/_imported_attachments/migrated/273494_FullSizeRender%5B2%5D.jpg)