Diesel is here!
-
Made In USA of USA and Imported Components. Sheath Made In China.
Def
-
I agree with you..
-
Are the imported components Chinese?
-
It doesn't say. The components are probably sourced from a number of different places, and I'm certain China factors into it somewhere. Other very likely candidates are Taiwan and Mexico.
Def
-
That's a big letdown.The Diesel looks so promising.Maybe a good hard workout over the next week or so might bring out some redeeming virtue.
-
I think that's a *little * harsh boss, yes it's not exactly revolutionary, but it is a solid workman like tool :)
Much better than the God aweful Flik with it's tiny drivers ::)
-
Be a man and do a proper review for the front page!
-
@Micky d said:
I think that's a *little * harsh boss, yes it's not exactly revolutionary, but it is a solid workman like tool :)Much better than the God aweful Flik with it's tiny drivers ::)
I never said it was really that bad, just that there was nothing on it to make it stand out from other multis.
It is a decent tool, made well enough
a decent tool, that would be of interest to just about anyone interested in using it
See?
Def
-
I like the Diesel, I never really got to use one much. I still like my Flik better.
-
My very brief encounter with the Diesel left me feeling the same. It was about as exciting as one of my stories. :D
-
I think it's just the packaging and sheath that are made in China :)
Welcome to the forum mate :)
-
Thanks! I bought a Diesel today and in the next couple of days I'll post a mini-review comparing it to my Flik and MP400. My first impression of the Diesel is favourable. It's a decent tool for the price and certainly better than what I've seen coming from Gerber lately. My Diesel rattles quite a bit, but I'm used to that on Gerber multi-pliers so it's not a big issue. I did notice, however, that the pliers head rests at an angle when retracted and makes some contact with the inside of the handle. I'll have to post a couple of pics to show you what I mean. I can only assume it's because of how the scissors rest in the handle. Incidentally, I found I have to push the scissors to the side when closing the implement so that it doesn't bump against the pliers.
-
Look forward to reading your thoughts mate :)
-
After having been a Gerber MT fan since my first multiplier back around 92 or so, and having owned three of them in various versions over the years, I was extremely excited when the Diesel came out. I lusted after it for a long time.
Then I got one finally, and on first look was pleased as punch. It is a nice looking tool, had most all the implements I wanted, and seemed hardy enough.
I even took the time to mod in the blade exchanger from an old Scout. It was now 100% perfect.
Sadly, usage proved otherwise.
The blade tip snapped off while I was cutting a plastic zip tie off a cardboard box. Then the first time I used the phillips driver, it stripped the fins right off. That was while removing 3 screws from a wooden hand rail.
When the Scout I had carried for years had a bit of a stick in the pliers head, I had gotten a LM Super Tool 200 as a gift, and prior to the Diesel I had been carrying it grudgingly. When the Diesel arrived, I was thrilled to be back in the saddle with a new Gerber, and the LM went into the drawer.
Now the broken Diesel sits in that drawer, my Super Tool is on it's second owner, and there is a Surge in my bag. I have used the Surge daily for many months now, and it is as solid as my old Scout or original MP.
Shame to lose faith after all those years, but I can't say in my opinion that Gerber quality is what it used to be. I would still carry a Pro Scout if the Diesel debacle and the time spent with the ST 200 hadn't enticed me to the Surge.
If they made a Pro Scout with the carbide inserts, I might be tempted though. Or perhaps if they were to fix the Diesel and I found the problems resolved upon return. But frankly, the ST 200 was so solid.. and the Surge is the same. I'm just not sure.
I guess that is just how a company loses a faithful customer and another company gains a new one.
I do carry the fixed EAB from Gerber and like it a lot. So I am not anti-Gerber. I am just anti-Gerber MTs.
-
Well I hate to tell you but I am certainly the leader of the anti Gerber MT corp. I really have no clue why they are letting thier name go down the tubes.
-
Sorry to hear your having problem's with the Diesel mate :(, apart from snapping the tip off the blade I had no problems :-\
Maybe you just got a duff one, and just send it into Gerber to be replaced :)
-
Mike you have to admit that Gerber is passing off a ton of "Duff" tools lately.
-
@hawkchucker said:
Mike you have to admit that Gerber is passing off a ton of "Duff" tools lately.Definetly does seem that way these days >:(
Seem's to me the only good Gerber are the 600 series :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



