Going Buck Wild.
-
You have been picking up some beauties for sure.

-
@zoidberg said:
You have been picking up some beauties for sure.

Thanks ZB.
Here are a few traditional models and a re-post from the fixed blade thread.
A few more Bucks arrived recently.
The first is a model 120 and it's the largest knife in their classic series.
The next one is a 121 and this was their "fisherman' model until recently.It was dropped and replaced with several more modern designs.
Both have the Boone and Crockett logo placed on the handle and two shibboleths of the club are scripted on the blades.
-
This came into my possession a few days ago and I know very little about its origins.I asked the seller but they have no information because they purchased it at an estate sale.I've searched its model number but with little success.I'll continue to look for more information but for the purpose of this thread I'll list the components of this particular Buck.
The most obvious component is the great Sambar stag handles and the turquoise spacers.If you've viewed the previous thread of the Model 112 with the buffalo handle, then you'll recognize the chip flint blade which this knife has as well.The frame is made of nickel silver with nickel silver spacers between the stag and the turquoise.
The type of steel is not marked on the blade but it is listed on the COA as 420HC.The script on the blade does indicate this is #452 of 1,000.It also has no date stamp and unfortunately this is not listed on the CAO.
-
Have you noticed any variation in the sheaths? (Specifically the folder versions) Or are they mostly the thick leather versions?
-
@NKlamerus said:
Have you noticed any variation in the sheaths? (Specifically the folder versions) Or are they mostly the thick leather versions?Here is what I know about Buck sheaths.There are two standard sheaths offered with the Buck 110 Hunter.The first is the traditional stiff black leather and the second is a cordura nylon sheath.These are illustrated in the first picture.
The second picture illustrates the two sheaths that are offered either through the Custom Shop or from dealers who have ordered non-standard/custom knives from Buck.They are both made from what Buck refers to as distressed leather,meaning they are much softer than the standard offerings.As can be viewed,they are offered in either black or brown.
The offerings for the Buck 112 Ranger,either as standard equipment,though the custom shop or from a dealer with a custom knife are slightly different.There are only two options currently available.The stiff black leather sheath or the cordura nylon sheath.The third picture illustrates these two offerings.
I hope this helps.
-
This is the Buck 112 Ranger that was engraved by Samantha.She is the engraver who engraved the 110 Hunter at the top of this page.She does wonderful work and her engraving creates a unique piece to be used and admired for years to come.
I'm so impressed with her work,that I will be commissioning her to engrave several more knives depicting game scenes.
-
I meant to comment on the engraved 110 above
Now I can compliment both the 110 and the 112
The engraving just impresses me a lotAs someone who dabbles in woodcarving I really appreciate the engraving of small unforgiving surfaces
like metal -
@Marcellus said:
I meant to comment on the engraved 110 above
Now I can compliment both the 110 and the 112
The engraving just impresses me a lotAs someone who dabbles in woodcarving I really appreciate the engraving of small unforgiving surfaces
like metalThanks Marcellus.
I'm in awe of people who can perform this type of work.
-
I see this thread has only gotten exponentially better in my absence. I look forward to catching up with this one :D
BEAUTIFUL knives as always TG

-
I see this thread has only gotten exponentially better in my absence. I look forward to catching up with this one :D
BEAUTIFUL knives as always TG

Thank you brother,where have you been?
I've been sick and time just flew by. It's great to be back :D
I'm sorry to hear that,I hope you're doing well now.
-
I've been as busy as the proverbial one armed paper hanger.LOL
I was able to find,with the help of my brother,some information about the man who was responsible for this knife.His name is Wilde Bill Cody.He worked for Buck Knives for three decades from 1979 to 2009.He is native American and yes that's how he spells his name.Apparently not only was he talented but creative as well.He was responsible for designing many special and limited run knives of which this knife is one.
I provided some information concerning the features of this knife with one exception and that is the headless design.This is one name given a Buck 100/112 knife where the rear of the frame [bolster] is milled away.As seen in the pictures provided,the handle material is then placed behind the front of the frame [bolster] and continues to the rear of the knife.
-
I have ten more Buck knives waiting to be cleaned and oiled.I then need to take some pictures and post them here.
There are several which are unique,such as the 112 Ranger that was made for only a few months in 1972.I have another 112 Ranger that was made during the first year the finger groove model was introduced NIB.
These are just the teasers.LOL
Hopefully I'll have time this weekend to post these and a few more fixed blade models.
-
Indeed.......
Toolguy - I'll stop asking for collection photos, I'm guess you'll need to hire people to get that done!


Do you display your knives at all?
I have to hide my small collection as best I can in fear of theft, while what I actually want to do is lay everything out on the floor and sit in the middle of the lot each day :D
I can just image being a knife-nut you must feel the same or something similar, and you've got sets that should look better together than.......just about anything I can think of! :D -
Intermission?
-
@Gerhard Gerber said:
@SteveC said:
Indeed.......
Toolguy - I'll stop asking for collection photos, I'm guess you'll need to hire people to get that done!
Do you display your knives at all?
I have to hide my small collection as best I can in fear of theft, while what I actually want to do is lay everything out on the floor and sit in the middle of the lot each day :D
I can just image being a knife-nut you must feel the same or something similar, and you've got sets that should look better together than.......just about anything I can think of! :DI keep this current collection of Bucks in a craftsman tool chest.I have the two DU models displayed in my sports room with some Ducks Unlimited memorabilia.
-
This is one of the Buck 112's I mentioned in a previous post.This particular Buck was made during the first year of 112 production,1972.During that year Buck experimented with blade orientation to the handle,handle material,number of handle rivets and spring retainer metal.
This 112 I have pictured below is a <u>Category II version 2</u>.That is it has the Segua wood handle with two small brass rivets.
This legend explains some of these transitions:
Buck Ranger Model 112 Timeline 1972.
Category I:Inverted stamp: BUCK, U.S.A.
Version 1. Left hand stamp, brass spring holder, black micarta inlays, two small, less than 1/16” brass inlay rivets and stainless rocker rivet.
Version 2. Same as above except now a stainless spring holder.
**Category II:**Stamped BUCK, 112, U.S.A.
Version 1. Left hand stamp, stainless spring holder, black micarta inlays, two brass inlay rivets and stainless rocker rivet.
Version 2. <u>Same as above except inlays are Segua wood. </u>
Version 3. Same as above except inlays are Macasar Ebony wood.
-
This is the Buck 112 mentioned in reply #378.It's a 112 finger groove that was first produced eight years after the original 112 was introduced in 1972.I bid on one of these several weeks ago and was startled that the bidding went over $140.00.I learned more about the true value of this particular model.
I was perusing ebay for more unique model 112's when this very model came up for sale.The owner placed a BIN price of $95.00 NIB,so I bought it.
Collectors are able to distinguish this first year of production because Buck initiated a date stamp system several years prior to the introduction of this model.This is a Category IV Version 3 model and you can see it is the first time the 112 finger groove model appears.
This legend will help to explain.
Category IV Stamped BUCK 112 U.S.A. 1980 to 1981.*
Version 1. Left hand stamp, stainless spring holder, Macasar Ebony inlays, three 1/8” brass inlay rivets and stainless rocker rivet.
Version 2. Same as above except nail notch added.
Version 3. Same as above except radius handle edges. No radius in thumb depression area. <u>Finger grooved model introduced.</u>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
